Document Outline

• Contents
  • Chapter 1
    • 1.1 Introduction
    • 1.2 Specifications
    • 1.3 LCD specifications
    • 1.4 Touchscreen specifications
    • 1.5 Power
    • 1.6 I/O ports arrangement
    • 1.7 Mounting
    • 1.8 Exploded diagram
    • 1.9 Dimensions and cutout
  • Chapter 2 System Quick Starting
  • Chapter 3 The Engine of the TPC-1260
    • 3.1 Introduction
    • 3.2 CPC-2365 main board
    • 3.3 TPC-1260 I/O board
  • Chapter 4 Windows CE in the TPC-1260
    • 4.1 Introduction
    • 4.2 TPC-1260 utilities
    • 4.3 Networking
    • 4.4 Application program development
  • Chapter 5 System Tuning
    • 5.1 LCD contrast tuning
    • 5.2 Touchscreen calibration
  • Chapter 6 Maintenance
    • 6.1 CPU board replacement
    • 6.2 Fuse replacement
  • Appendix A Serial Port Settings
    • A.1 Baud Rate Settings (SW1)
    • A.2 Data Format/RS-422 Control Settings
  • Appendix B Watchdog Timer Programming Example
    • B.1 Watchdog timer programming example
  • Appendix C Installation
    • Windows 2000 Touch Screen Installation
  • Appendix D Fuse Specifications
    • D.1 Fuse Specifications
  • Figures
    • Figure 1.6-1 I/O ports arrangement
    • Figure 1.7-1 Panel mounting
    • Figure 1.8-1Exploded diagram
    • Figure 1.9-1 Dimensions and cutout
    • Figure 2-1 Unpack the package
    • Figure 2-2 Install HDD
    • Figure 2-3 Install CompactFlash memory card
    • Figure 2-4 Power connector and power lines
    • Figure 2-5 Power connector pin assignment
    • Figure 2-6 Plug the power lines to the system power receptor.
    • Figure 2-7 Turn on power switch
    • Figure 3.2-1 TPC-1260 main board
    • Figure 3.3-1 TPC-1260 I/O board (port side)
    • Figure 3.3-2 TCP- 1260 I/O board (LCD side)
    • Figure 4.1-1 Windows CE on TPC-1260
    • Figure 4.2-1 Soft-keyboard
    • Figure 4.2-2 Screen saver setting
    • Figure 4.3-1: Control Panel
    • Figure 4.3-2: Neworking by Windows Explorer
    • Figure 4.3-3 Remote networking
    • Figure 4.3-4 Make new connection
    • Figure 4.3-5 Direct connection
    • Figure 4.3-6 Default settings
    • Figure 4.3-7 Default settings (continued)
    • Figure 4.4-1 Flow-chart of building Windows CE runtime
    • Figure 5.1-1 Adjust LCD contrast
    • Figure 5.1-2 Remove the CPU Board cover
    • Figure 5.1-3 Adjusting the LCD brightness
    • Figure 5.2-2 Windows Explorer
    • Figure 5.2-3Control Panel
    • Figure 5.2-4 Calibration
    • Figure 5.2-5 Double-tap calibration
    • Figure 5.2-6 Stylus pointing calibration
    • Figure 5.2-7 Calibration screen
    • Figure 6.1-1 CPU board cover
    • Figure 6.1-2 Remove the CPU board cover
    • Figure 6.1-3 Remove the CPU board
    • Figure 6.2-1 Replace the fuse
    • Figure C-1 Hardware
    • Figure C-2 Device manager
    • Figure C-3 Uninstall the driver
    • Figure C-4 Mouse properties
    • Figure C-5 Update driver
    • Figure C-6 Select driver from known list
    • Figure C-7 Find out TouchScreen in the manufacturers list
    • Figure C-8 Re-install the driver
    • Figure C-9 Finish installation of touchscreen driver
  • Tables
    • Table 1.3-1 LCD specifications
    • Table 1.4-1 Touchscreen specifications
    • Table 3.2-1 TPC-1260 main board connector/jumper list
    • Table 3.2-2 J1 RTC control jumper
    • Table 3.3-1 TPC-1260 I/O board connector/jumper list