Document Outline

• Raven GPRS
• Contents
• CHAPTER 1 Introduction to Raven GPRS
  • Raven Overview
    • FIGURE 1. Raven face and back
  • GPRS Overview
  • Connecting to Cingular using Serial
  • Establishing a Connection with GPRS
    • FIGURE 2. Using the Raven to connect to the Internet
  • Using GPRS to Communicate directly to your Device
  • Common Uses for the Raven
    • FIGURE 3. Financial POS and Kiosk
    • FIGURE 4. Automation and Telemetry
    • FIGURE 5. Backup connection to the Internet
• CHAPTER 2 Subscriber Identity Module (SIM)
  • Installing the SIM
    • Opening the Case
      • FIGURE 1. Modem back
      • FIGURE 2. Modem partially slid from case
    • Ejecting the SIM tray
      • FIGURE 3. Tray button
      • FIGURE 4. Empty SIM Tray
    • Inserting the SIM
      • FIGURE 5. SIM Tray with a SIM
      • FIGURE 6. Inserting the SIM
• CHAPTER 3 Raven Activation
  • Connecting the Raven to your computer
  • Quick Start Guide and Setup Wizard
    • FIGURE 1. Setup Wizard Menu
  • Configuring the Raven using AT Commands
  • Raven Indicator Lights
    • FIGURE 2. Raven indicator lights
• CHAPTER 4 Raven Utilities
  • AceView
    • FIGURE 1. AceView
    • FIGURE 2. AceView: About Raven
  • Wireless ACE and Wireless ACE Web
    • FIGURE 3. Wireless ACE
  • AceNet
    • FIGURE 4. AceNet
  • Modem Doctor
    • FIGURE 5. Modem Doctor
• CHAPTER 5 DNS: Using Names Instead of IPs
  • Configuring DNS
    • FIGURE 1. Wireless ACE: DNS
    • PPP-Peer
• CHAPTER 6 IP Manager
  • Fully Qualified Domain Name
  • Dynamic Name Resolution
  • Configuring the Raven for Dynamic IP
    • FIGURE 1. Wireless ACE: Dynamic IP (IP Manager configuration)
    • Restrictions for Modem Name
• CHAPTER 7 Keepalive
  • Configuring Keepalive
    • FIGURE 1. Keepalive Configuration in Wireless ACE
  • Data usage using Keepalive.
• CHAPTER 8 Host Modes
  • AT Mode
  • PassThru Mode
  • PPP Mode
  • Slip Mode
  • UDP Pad Mode
    • UDP Auto Answer
    • Reliable UDP
    • Multicast UDP
  • TCP PAD Mode
    • TCP Auto Answer
  • Hybrid Modes
    • TABLE 1. Hybrid Mode Settings
• CHAPTER 9 Modbus/BSAP Configuration
  • Modbus Overview
    • Telemetry
    • Remote Terminal Unit (RTU)
    • Supervisory Control and Data Acquisition (SCADA)
    • Programmable Logic Controller (PLC)
    • Modbus TCP/IP
    • Raven Modbus on UDP
      • FIGURE 1. Automation and Telemetry
  • Configuring the Raven at the Polling Host for Modbus on UDP
    • Port
      • FIGURE 2. Wireless ACE: Destination Port
      • FIGURE 3. Wireless ACE: Device Port
    • Default Power-up Mode
      • FIGURE 4. Wireless ACE: MD Configuration
    • IDs to IPs
      • FIGURE 5. Wireless ACE: Addr List
    • Dynamic IP
      • FIGURE 6. Wireless ACE: Modem Name and Domain
  • Configuring the Remote Ravens for Modbus with UDP
    • Port
    • Default Power-up Mode
      • FIGURE 7. Wireless ACE: UDP Power-up Mode
    • Host Raven IP
      • FIGURE 8. Wireless ACE: Destination IP
    • Dynamic IPs
    • RTU settings
      • FIGURE 9. Raven mounted in an enclosure with an RTU
      • FIGURE 10. RTU to Raven setup
      • FIGURE 11. Power Connections
• CHAPTER 10 Simple Network Management Protocol (SNMP)
  • SNMP Overview
    • Management Information Base (MIB)
    • SNMP Traps
  • Raven SNMP Configuration
    • Listening Port
      • FIGURE 1. Wireless ACE: *SNMPPORT
    • Security Level
      • FIGURE 2. Wireless ACE: *SNMPPORT
    • User Name and Password
      • FIGURE 3. Wireless ACE: Changing the Raven Password - Menu Option
      • FIGURE 4. Wireless ACE: Changing the Raven Password
    • Trap Destination
      • FIGURE 5. Wireless ACE: *SNMPPORT
  • Example of the MIB trap
• CHAPTER 11 Hardware Installation
  • Raven Mounting Kit
    • FIGURE 1. Raven Mounting Bracket, part number 100-170-1009 A
  • Connecting the Antenna
    • FIGURE 2. Raven connectors
  • Connecting power
  • Connecting the Raven to a computer or other device
• CHAPTER 12 AT Commands
  • Using Wireless Ace
    • FIGURE 1. Wireless ACE: Using AT Commands
    • FIGURE 2. Wireless ACE: toolbar
  • Using Telnet Terminal Emulation
    • FIGURE 3. HyperTerminal: Connection Name
    • FIGURE 4. HyperTerminal: TCP/IP Settings
    • FIGURE 5. HyperTerminal: AT mode via Telnet
  • Direct Serial Connection
    • FIGURE 6. HyperTerminal: Connection Name
    • FIGURE 7. HyperTerminal: Comport Setting
    • FIGURE 8. HyperTerminal: Comport Settings
  • AT Commands
    • TABLE 1. Information and Status
    • TABLE 2. Basic Commands
    • TABLE 3. Activating (Provisioning)
    • TABLE 4. Cellular Network (Cingular GPRS)
    • TABLE 5. Local Network and Host Modes
    • TABLE 6. PassThru Mode
    • TABLE 7. Telnet
    • TABLE 8. Friends Mode
    • TABLE 9. Time and Date
    • TABLE 10. Logging
    • TABLE 11. DNS
    • TABLE 12. IPManager
    • TABLE 13. Keepalive
    • TABLE 14. Direct Communication
    • TABLE 15. SMTP (email)
    • TABLE 16. Modbus Settings
    • TABLE 17. SNMP
    • TABLE 18. Other Settings
    • TABLE 19. Commands Usable with PassThru
• CHAPTER 13 Raven Specifications
  • Physical Characteristics:
  • Data Services & RF Features:
  • Environmental:
  • Power Management:
• Troubleshooting
  • Support web site
  • Contacting Technical Support