Document Outline

• AirLive WHA-5500CPE User's Manual
  • CE Declaration of Conformity
  • Regulatory Information, FCC Statement, Copyright Statement
  • Table of Contents
  • 1. Introduction
    • 1.1 Overview
    • 1.2 Features
    • 1.3 Wireless Operation Modes
      • 1.3.1 Access Point Mode
      • 1.3.2 Repeater Mode
      • 1.3.3 WDS Bridge Mode
      • 1.3.4 Client Infrastructure Mode
      • 1.3.5 Client Ad Hoc Mode
      • 1.3.6 WISP Router Mode
    • 1.4 Set up the device
      • 1.4.1 STATIC IP
      • 1.4.2 AUTOMATIC IP
  • 2. Install the 802.11A Access Point
    • 2.1 What’s in the box?
    • 2.2 Hardware Installation
      • 2.2.1 Mounting Configuration
      • 2.2.2 Antenna polarization
    • 2.3 Configuration steps
    • 2.4 Set up a wireless client as a DHCP client
  • 3. Basic Configuration
    • 3.1 Setup wizard
      • 3.1.1 TIME SETTINGS
      • 3.1.2 DEVICE IP SETTINGS
      • 3.1.3 WIRELESS SETTINGS
        • WEP
      • 3.1.4 FINISH SETUP WIZARD AND SAVE YOUR SETTINGS
    • 3.2 Advanced settings
      • 3.2.1 PASSWORD SETTINGS
      • 3.2.2 SYSTEM MANAGEMENT
      • 3.2.3 SNMP Settings
      • 3.2.4 MAC FILTERING SETTINGS
      • 3.2.5 OPERATIONAL MODE
    • 3.3 Access Point Mode Settings
      • 3.3.1 Wireless Settings
        • Enable Radio eXtended Range: Select the check box to enable the Atheros’s eXtended Range(XR) technology to extend the wireless coverage range.
        • Enable WDS: Select the check box to enable WDS (Wireless Distribution System).
        • Enable 802.11d: Select the check box to enable 802.11d. 802.11d is a standard for use in countries where systems using other standards in the 802.11 family are not allowed to operate.
      • 3.3.2 SSID Settings
      • 3.3.3 QoS Settings
      • 3.3.4 RADIUS Settings
    • 3.4 Repeater Mode Settings
      • 3.4.1 AP Node Settings
      • 3.4.2 Repeater Node Settings
      • 3.4.3 Repeater Node Local service Settings
      • 3.4.4 Repeater Advance Wireless Setting
        • Enable Radio eXtended Range: Select the check box to enable the Atheros’s eXtended Range(XR) technology to extend the wireless coverage range.
      • 3.4.5 QoS Settings
      • 3.4.6 RADIUS Settings
    • 3.5 WDS Bridge Mode Settings
      • 3.5.1 Wireless Settings
    • 3.6 Client Infrastructure Mode Settings
      • 3.6.1 Wireless Settings
    • 3.7 Client Adhoc Mode Settings
      • 3.7.1 Wireless Settings
    • 3.8 WISP Router Mode Settings
      • 3.8.1 Wireless Settings
      • 3.8.2 WISP Router DHCP Server Settings
      • 3.8.3 Multiple DMZ
      • 3.8.4 Virtual Server Settings
      • 3.8.5 Special Applications
      • 3.8.6 IP Filtering Settings
      • 3.8.7 IP Routing Settings
    • 3.9 ACK Timeout Setup
  • 4. Manage the WHA-5500CPE
    • 4.1 Device Status
    • 4.2 System Log
    • 4.3 Wireless Client Table
    • 4.4 Radio Table
    • 4.5 Site Survey
      • 4.5.1 Signal survey
    • 4.6 Firmware Upgrade
    • 4.7 Configuration Save and Restore
    • 4.8 Factory Default
    • 4.9 Reboot System
    • 4.10 What if you forgot the password?
  • Specifications
    • AP Specification
    • Antenna Specification
    • Environmental & Mechanical Characteristics