Document Outline

• Documentation Warranty
• DFARS/Restricted Rights Notice
• Definitions
• Corrected System Performance
  • System Dynamic Range and Receiver Dynamic Range
  • Table 1. System Dynamic Range, Options 200 or 400, and Receiver Dynamic Range, All Options
  • Table 2a. System Dynamic Range at Test Port (dB), Options 200 or 400
  • Table 2c. System Dynamic Range at Test Port (dB), Option 224
  • Table 2d. System Dynamic Range at Test Port (dB), Options 224 or 423
  • Table 3a. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
  • Table 3b. Extended Dynamic Range at Direct Receiver Access Input (dB) - Typical
• N5241A, N5242A, and N5249A Corrected System Performance with 3.5mm Connectors, All Opts
  • Table 4. 85052B Calibration Kit
    • Transmission Uncertainty
    • Reflection Uncertainty
  • Table 5. N4433A 4-Port Electronic Calibration Module
    • Transmission Uncertainty
    • Reflection Uncertainty
  • Table 6. N4691B 2-Port Electronic Calibration Module
    • Transmission Uncertainty
    • Reflection Uncertainty
• Uncorrected System Performance
  • Table 7a. Directivity (dB)
  • Table 7b. Source Match (dB)
  • Table 7c. Load Match (dB)
  • Table 7d. Transmission Tracking, Reflection Tracking, Crosstalk (dB), All Options, All Ports - Typical
• Test Port Output
  • Table 8. Frequency Information, All Options
  • Table 9a. Maximum Leveled Power (dBm), Options 200 or 400
  • Table 9b. Maximum Leveled Power (dBm), Options 219 or 419
  • Table 9c. Maximum Leveled Power (dBm), Option 219 or 419 with 0291
  • Table 9d. Maximum Leveled Power (dB), Options 224 or 423
  • Table 9e. Maximum Leveled Power (dBm), Options 224 or 423, Combine Mode - Typical
  • Table 9f. Maximum Leveled Power (dBm), Option 224
  • Table 9g. Maximum Leveled Power (dB), Options 224 or 423 with 0291
  • Table 9h. Maximum Leveled Power (dBm), Options 224 or 423 with 0291, Combine Mode - Typical
  • Table 10. Power Level Accuracy (dB) at Nominal Power1, All Options
  • Table 11a. Power Level Linearity1 (dB), All Options - Specification
  • Table 11b. Power Level Linearity1 (dB), All Options - Specification
  • Table 11c. Power Level Linearity1 (dB), Option 224 - Specification
  • Table 12a. Power Sweep Range (dB), Options 200 or 400
  • Table 12b. Power Sweep Range (dB), Options 219 or 419
  • Table 12c. Power Sweep Range (dB), Options 219 or 419 with 0291
  • Table 12d. Power Sweep Range (dB), Options 224 or 423
  • Table 12e. Power Sweep Range (dB), Option 224
  • Table 12f. Power Sweep Range (dB), Options 224 or 423 with 0291
  • Table 13. Nominal Power (Preset Power, dBm)
  • Table 14. Power Resolution and Maximum/Minimum Settable Power, All Ports1
  • Table 15. Harmonics at Max Specified Power (dBc), All Options - Typical
  • Table 16. Non-Harmonic Spurs (dBc) at Nominal Power, All Options, All Ports - Typical
  • Table 17. Phase Noise (dBc/Hz), All Options, All Ports - Typical
• Test Port Input
  • Table 18. Noise Floor1 (dBm) at 10 Hz IFBW, All Options, All Ports
  • Table 19. 0.1 dB Compression at Test Port (dBm), All Options, All Ports - Typical
  • Table 20. Test Port Compression (dB) at 8 dBm Test Port Power, All Options, All Ports, - Specification
  • Table 21a. Trace Noise1 Magnitude (dB rms), All Options, All Ports
  • Table 21b. Trace Noise1 Phase (deg rms), All Options, All Ports
  • Table 22. Reference Level - Specification
  • Table 23. Stability1 - Typical
  • Table 24. Damage Input Level - Specification
• Noise Receiver Input (Option 029 only)
  • Table 25. Noise Receiver Bandwidth
  • Table 26. Receiver Noise Figure (dB), Port 2, at All BW, High Gain Setting
  • Table 27. Noise Figure Trace Noise1 (dB rms) at 4 MHz BW
  • Table 28. Noise Receiver Linearity (dB) at 4 MHz BW - Specification
  • Table 29. Noise Receiver Input Range - Specification
• Dynamic Accuracy
  • Table 30. Dynamic Accuracy - Specification
    • Dynamic Accuracy, 0.010 GHz
    • Dynamic Accuracy, 0.050 GHz
    • Dynamic Accuracy, 1 GHz
    • Dynamic Accuracy, 8.5 GHz
    • Dynamic Accuracy, 10 GHz
    • Dynamic Accuracy, 13.5 GHz
    • Dynamic Accuracy, 20 GHz
    • Dynamic Accuracy, 26.5 GHz
  • Table 31. Test Port Input (Group Delay)1
• General Information
  • Table 32. Miscellaneous Information
  • Table 33. Front Panel Information, All Options
  • Table 34. Rear Panel Information, All Options
  • Table 35. Analyzer Dimensions and Weight
  • Regulatory and Environmental information
• Measurement Throughput Summary
  • Table 36a. Cycle Time (ms) for Measurement Completion, All Options - Typical
  • Table 36b. Cycle Time (ms) for Full-Span Measurement Completion - Typical
  • Table 37. Cycle Time vs. IF Bandwidth - Typical
  • Table 38. Cycle Time vs. Number of Points
  • Table 39. Data Transfer Time1 (ms) - Typical
• Specifications: Front-Panel Jumpers
  • Table 40. Measurement Receiver Inputs (dBm) - Typical
  • Table 41a. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
  • Table 41b. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
  • Table 41c. Reference Receiver Inputs and Reference Source Outputs (dBm) - Typical
  • Table 42a. Source Outputs (dBm) - Typical
  • Table 42b. Source Outputs (dBm) - Typical
  • Table 43. Coupler Inputs (dB) - Typical
  • Table 44. Damage Level - Typical
• Test Set Block Diagrams
  • Figure 1. 2-Port N5241A, N5242A, and N5249A Base Unit Option 200
  • Figure 2. 2-Port N5241A, N5242A, and N5249A Option 219
  • Figure 3. 2-Port N5241A, N5242A, and N5249A Option 224
  • Figure 4. 2-Port N5241A, N5242A, and N5249A Option 224 with 029
  • Figure 5. 4-Port N5241A, N5242A, and N5249A Base Unit Option 400
  • Figure 6. 4-Port N5241A, N5242A, and N5249A Option 419
  • Figure 7. 4-Port N5241A, N5242A, and N5249A Option 423
  • Figure 8. 4-Port N5241A, N5242A, and N5249A Option 423 with 029
  • Figure 9. Receiver Block Diagram