Document Outline

• EC – declaration of conformity
• Product registration
• 1. Safety
  • 1.1 Legal considerations
  • 1.2 Structure of the safety instructions
    • 1.2.1 Signal word panel
    • 1.2.2 Safety alert symbol
    • 1.2.3 Pictograms
    • 1.2.4 Word message panel structure
  • 1.3 Localization / position of safety labels on the unit
  • 1.4 Type plate
  • 1.5 General safety instructions on installing and operating the drying and heating ovens FED
  • 1.6 Intended use
• 2. Unit description
  • 2.1 Equipment overview FED
• 3. Completeness of delivery, transportation, storage, and installation
  • 3.1 Unpacking, and checking equipment and completeness of delivery
  • 3.2 Guidelines for safe lifting and transportation
  • 3.3 Storage
  • 3.4 Location of installation and ambient conditions
• 4. Installation
  • 4.1 Electrical connection
  • 4.2 Connection to a suction plant (optional)
• 5. Start up
  • 5.1 Turning on the unit
  • 5.2 Heating operation display
  • 5.3 Air change
• 6. Controller setting
  • 6.1 Display / entry of temperature and ventilation set-points (without ramp function)
  • 6.2 Display / entry of temperature and ventilation set-points (with selected temperature ramp)
  • 6.3 Time functions: Continuous operation and Timer operation
    • 6.3.1 Switching between Continuous operation and Timer operation
    • 6.3.2 Continuous operation
    • 6.3.3 Setting the timer values
  • 6.4 User level settings
    • 6.4.1 Temperature unit change between degrees Celsius °C and degrees Fahrenheit °F
    • 6.4.2 Enter a temperature ramp
    • 6.4.3 Chamber addressing
    • 6.4.4 Selecting the timer function
    • 6.4.5 Setting the interface mode and, if appropriate, the printer interval
  • 6.5 Temperature programming example
  • 6.6 General notes
• 7. Temperature safety devices
  • 7.1 Temperature safety device class 2 (DIN 12880)
  • 7.2 Temperature safety device class 3.1 (DIN 12880) (option)
  • 7.3 Disconnectable audible over-temperature alarm (option)
• 8. Options
  • 8.1 Communication software APT-COM™ 3 DataControlSystem (option)
  • 8.2 Data logger kit
  • 8.3 HEPA fresh air filter (option)
  • 8.4 Mostly gas-tight version (option for FED 53 and FED 115)
  • 8.5 Inert gas connection with mostly gas-tight version (option for FED 53 and FED 115)
  • 8.6 Analog output for temperature (option)
• 9. Maintenance, cleaning, and service
  • 9.1 Maintenance intervals, service
  • 9.2 Cleaning and decontamination
    • 9.2.1 Cleaning
    • 9.2.2 Decontamination
  • 9.3 Sending the unit back to BINDER GmbH
• 10. Disposal
  • 10.1 Disposal of the transport packing
  • 10.2 Decommissioning
  • 10.3 Disposal of the unit in the Federal Republic of Germany
  • 10.4 Disposal of the unit in the member states of the EC except for the Federal Republic of Germany
  • 10.5 Disposal of the unit in non-member states of the EC
• 11. Troubleshooting
• 12. Technical description
  • 12.1 Factory calibration and adjustment
  • 12.2 Definition of usable volume
  • 12.3 Over current protection
  • 12.4 FED technical data
  • 12.5 Equipment and Options
  • 12.6 Accessories and spare parts
• 13. Contamination clearance certificate
  • 13.1 For units located outside North America and Central America
  • 13.2 For units in North America and Central America
• Word-Lesezeichen
  • OLE_LINK6
  • OLE_LINK7
  • OLE_LINK12