Document Outline

• EC – declaration of conformity
• Product registration
• 1. Safety
  • 1.1 Legal considerations
  • 1.2 Structure of the safety instructions
    • 1.2.1 Signal word panel
    • 1.2.2 Safety alert symbol
    • 1.2.3 Pictograms
    • 1.2.4 Word message panel structure
  • 1.3 Localization / position of safety labels on the unit
  • 1.4 Type plate
  • 1.5 General safety instructions on installing and operating the constant climate chamber
  • 1.6 Intended use
  • 1.7 Resistance of the humidity sensor against harmful substances
• 2. Unit description
  • 2.1 Unit overview
  • 2.2 Lateral control panel, right side
  • 2.3 Lateral control panel, left side
  • 2.4 Instrument panel
• 3. Completeness of delivery, transportation, storage, and installation
  • 3.1 Unpacking, and checking equipment and completeness of delivery
  • 3.2 Guidelines for safe lifting and transportation
  • 3.3 Storage
  • 3.4 Location of installation and ambient conditions
• 4. Installation and connections
  • 4.1 Spacers for rear wall distance
  • 4.2 Wastewater connection
  • 4.3 Freshwater supply
    • 4.3.1 Automatic fresh water supply via water pipe
    • 4.3.2 Manual fresh water supply via external freshwater can (option)
    • 4.3.3 Connection kit for connection to the water main
    • 4.3.4 Safety kit: Hose burst protection device with reflux protection device (available via BINDER Individual)
  • 4.4 Electrical connection
  • 4.5 Installation and connection of the light cassettes
  • 4.6 Connecting the light sensors
• 5. Start up
  • 5.1 Function overview of the MB1 display program controller
  • 5.2 Operating modes
  • 5.3 Performance after power failures
  • 5.4 Turning on the unit
• 6. Settings of the MB1 controller
  • 6.1 Selection of the MB1 controller’s menu language
  • 6.2 Function overview of the MB1 program controller displays
  • 6.3 Menu settings in the “User-settings” menu
  • 6.4 Menu settings in the “User Level” menu
• 7. Graphic representation of the historical measurement (chart recorder function)
  • 7.1 Setting the storage rate
• 8. Manual Mode
  • 8.1 Entering the set point values
  • 8.2 Entering the set point values when operating without illumination
  • 8.3 Performance after power failure in Manual Mode
• 9. Function of light measurement, and integration: Light Quantum Control
  • 9.1 Illumination measurement and temporal integration
  • 9.2 Toggling between displays of actual and integrated values
• 10. Program operation of the temperature, and humidity controller
  • 10.1 Overview menu-based program entry
  • 10.2 Entry of temperature values and fan speed
  • 10.3 Entry of humidity values
  • 10.4 Selecting between set-point ramp and set-point step
  • 10.5 Program entry as set-point ramp or as set-point step
  • 10.6 Advice for the programming of the different temperature or humidity transitions
  • 10.7 Repetition of a section or several sections within a program
  • 10.8 Performance after power failure in Program Mode
  • 10.9 Starting a previously entered program
  • 10.10 Deleting a program
  • 10.11 Template for temperature profile
  • 10.12 Template for humidity profile
  • 10.13 Program table template for temperature and fan speed rate
  • 10.14 Program table template for humidity
• 11. Temperature safety devices
  • 11.1 Over temperature protective device (class 1)
  • 11.2 Safety controller (temperature safety device class 3.1)
    • 11.2.1 Safety controller set-point types
    • 11.2.2 Checking and setting safety controller set-point type and safety controller set-point
  • 11.3 Temperature safety device class 3.3 (DIN 12880) (option)
    • 11.3.1 Temperature safety device class 3.1
    • 11.3.2 Temperature safety device class 3.2
• 12. Notification and alarm functions
  • 12.1 Notification and alarm system overview (auto diagnosis system)
  • 12.2 Messages concerning the humidity system
  • 12.3 Resetting the notification or alarm messages
• 13. Humidity system
  • 13.1 Function of the humidifying and dehumidifying system
• 14. Defrosting at refrigerating operation
• 15. ICH compliant illumination according to CPMP/ICH/279/95 (Q1B)
  • 15.1 BINDER ICH light
  • 15.2 Adjustable light cassettes
• 16. Characteristic features of the light sensors
  • 16.1 LUX sensor
  • 16.2 UVA sensor
  • 16.3 Spectral range
  • 16.4 Spatial sensitivity
• 17. Options
  • 17.1 Communication software APT-COM™ 3 DataControlSystem (option)
  • 17.2 Interface RS 422 (option)
  • 17.3 Data logger kits (option)
  • 17.4 Analog outputs for temperature and humidity (option)
  • 17.5 Zero-voltage relay alarm outputs for temperature and humidity for alarm transmission (option)
  • 17.6 Water protected internal socket (option)
  • 17.7 Keyboard locking (option)
  • 17.8 Additional flexible Pt 100 temperature sensor (option)
  • 17.9 External freshwater and waste-water cans (option)
    • 17.9.1 Mounting the freshwater can
    • 17.9.2 Mounting the waste-water can
    • 17.9.3 Mounting with wastewater recycling
  • 17.10 BINDER Pure Aqua Service (option)
• 18. Maintenance, cleaning, and service
  • 18.1 Maintenance intervals, service
  • 18.2 Replacement of the fluorescent tubes
  • 18.3 Calibrating the light sensors and adjusting the controller display
  • 18.4 Cleaning and decontamination
    • 18.4.1 Cleaning
    • 18.4.2 Decontamination
  • 18.5 Sending the unit back to BINDER GmbH
• 19. Disposal
  • 19.1 Disposal of the transport packing
  • 19.2 Decommissioning
  • 19.3 Disposal of the unit in the Federal Republic of Germany
  • 19.4 Disposal of the unit in the member states of the EC except for the Federal Republic of Germany
  • 19.5 Disposal of the unit in non-member states of the EC
• 20. Troubleshooting
• 21. Technical description
  • 21.1 Factory calibration and adjustment
  • 21.2 Over current protection
  • 21.3 Definition of usable volume
  • 21.4 KBF LQC technical data
  • 21.5 Equipment and options KBF LQC
  • 21.6 Spare parts and accessories
  • 21.7 Dimensions KBF LQC 240
  • 21.8 Dimensions KBF LQC 720
• 22. Contamination clearance certificate
  • 22.1 For units located outside North America and Central America
  • 22.2 For units in North America and Central America
• Word-Lesezeichen
  • OLE_LINK9
  • OLE_LINK5
  • OLE_LINK3
  • OLE_LINK18
  • OLE_LINK19
  • OLE_LINK4
  • OLE_LINK6
  • OLE_LINK21
  • OLE_LINK22
  • OLE_LINK1
  • OLE_LINK2
• Leere Seite