Document Outline

• EC – declaration of conformity
• Product registration
• 1. Safety
  • 1.1 Legal considerations
  • 1.2 Structure of the safety instructions
    • 1.2.1 Signal word panel
    • 1.2.2 Safety alert symbol
    • 1.2.3 Pictograms
    • 1.2.4 Word message panel structure
  • 1.3 Localization / position of safety labels on the unit
  • 1.4 Type plate
  • 1.5 General safety instructions on installing and operating the constant climate chamber
  • 1.6 Intended use
  • 1.7 Resistance of the humidity sensor against harmful substances
• 2. Unit description
  • 2.1 Unit overview
  • 2.2 Instrument panel for KBF / KBF P
  • 2.3 Lateral control panel, right side KBF / KBF P
  • 2.4 Lateral control panel, left side (KBF P, option KBF)
  • 2.5 Rear view with water connections
• 3. Completeness of delivery, transportation, storage, and installation
  • 3.1 Unpacking, and checking equipment and completeness of delivery
  • 3.2 Guidelines for safe lifting and transportation
  • 3.3 Storage
  • 3.4 Location of installation and ambient conditions
• 4. Installation and connections
  • 4.1 Spacers for rear wall distance
  • 4.2 Wastewater connection
  • 4.3 Freshwater supply
    • 4.3.1 Automatic freshwater supply via water pipe
    • 4.3.2 Manual freshwater supply via external freshwater can (option)
    • 4.3.3 Connection kit for connecting the unit to the water main
    • 4.3.4 Safety kit: Hose burst protection device with reflux protection device (available via BINDER INDIVIDUAL customized solutions)
  • 4.4 Electrical connection
  • 4.5 Installation and connection of the light cassettes (KBF P)
• 5. Start up
  • 5.1 Function overview of the MB1 display program controller
  • 5.2 Operating modes
  • 5.3 Performance after power failures
  • 5.4 Turning on the unit
• 6. MB1 controller settings
  • 6.1 Selection of the MB1 controller’s menu language
  • 6.2 Function overview of the MB1 program controller displays
  • 6.3 Menu settings in the “User-settings” menu
  • 6.4 Menu settings in the “User Level” menu
• 7. Graphic representation of the historical measurement (chart recorder function)
  • 7.1 Setting the storage rate
• 8. Manual Mode
  • 8.1 Entering the set point values
  • 8.2 Entering the set point values for KBF P when operating without illumination
  • 8.3 Performance after power failure in Manual Mode
• 9. Program operation
  • 9.1 Menu-based program entry
  • 9.2 Entry of temperature values and fan speed
  • 9.3 Entry of humidity values
  • 9.4 Selecting between “set-point ramp” and “set-point step”
  • 9.5 Program entry as “set-point ramp” or as “set-point step”
  • 9.6 Information on programming different temperature or humidity transitions
  • 9.7 Repetition of a section or several sections within a program
  • 9.8 Performance after power failure in Program Mode
  • 9.9 Starting a previously entered program
  • 9.10 Deleting a program
  • 9.11 Template for temperature profile
  • 9.12 Template for humidity profile
  • 9.13 Program table template for temperature and fan speed rate
  • 9.14 Program table template for humidity
• 10. Temperature safety devices
  • 10.1 Over temperature protective device (class 1)
  • 10.2 Safety controller (temperature safety device class 3.1)
    • 10.2.1 Safety controller set-point types
    • 10.2.2 Checking and setting safety controller set-point type and safety controller set-point
  • 10.3 Temperature safety device class 3.3 (DIN 12880) (option)
    • 10.3.1 Temperature safety device class 3.1
    • 10.3.2 Temperature safety device class 3.2
• 11. Notification and alarm functions
  • 11.1 Notification and alarm system overview (auto diagnosis system)
  • 11.2 Messages concerning the humidity system
  • 11.3 Resetting the notification or alarm messages
• 12. Humidity system
  • 12.1 Function of the humidifying and dehumidifying system
• 13. Defrosting at refrigerating operation
• 14. ICH compliant illumination according to CPMP/ICH/279/95 (Q1B)
  • 14.1 BINDER ICH light
  • 14.2 Adjustable light cassettes
• 15. Options
  • 15.1 Communication software APT-COM™ 3 DataControlSystem (option)
  • 15.2 Interface RS 422 (option)
  • 15.3 Data logger kits (option)
  • 15.4 Analog outputs for temperature and humidity (option)
  • 15.5 Zero-voltage relay alarm outputs for temperature and humidity (option)
  • 15.6 Water protected internal socket (option – not for UL units)
  • 15.7 Keyboard locking (option)
  • 15.8 Additional flexible Pt 100 temperature sensor (option)
  • 15.9 External freshwater and wastewater cans (option)
    • 15.9.1 Mounting the freshwater can
    • 15.9.2 Mounting the wastewater can
    • 15.9.3 Mounting with wastewater recycling
  • 15.10 BINDER Pure Aqua Service (option)
• 16. Maintenance, cleaning, and service
  • 16.1 Maintenance intervals, service
  • 16.2 Replacement of the fluorescent tubes
  • 16.3 Cleaning and decontamination
    • 16.3.1 Cleaning
    • 16.3.2 Decontamination
  • 16.4 Sending the unit back to BINDER GmbH
• 17. Disposal
  • 17.1 Disposal of the transport packing
  • 17.2 Decommissioning
  • 17.3 Disposal of the unit in the Federal Republic of Germany
  • 17.4 Disposal of the unit in the member states of the EC except for the Federal Republic of Germany
  • 17.5 Disposal of the unit in non-member states of the EC
• 18. Troubleshooting
• 19. Technical description
  • 19.1 Factory calibration and adjustment
  • 19.2 Over current protection
  • 19.3 Definition of usable volume
  • 19.4 Technical Data
    • 19.4.1 KBF technical data
    • 19.4.2 KBF P technical data
  • 19.5 Equipment and options
  • 19.6 Spare parts and accessories
  • 19.7 Dimensions KBF 115
  • 19.8 Dimensions KBF 240 / KBF P 240
  • 19.9 Dimensions KBF 720 / KBF P 720
• 20. Contamination clearance certificate
  • 20.1 For units located outside North America and Central America
  • 20.2 For units in North America and Central America
• Word-Lesezeichen
  • OLE_LINK20
  • OLE_LINK5
  • OLE_LINK18
  • OLE_LINK19
  • OLE_LINK14
  • OLE_LINK15
  • OLE_LINK4
  • OLE_LINK6
  • OLE_LINK7
  • OLE_LINK8
  • OLE_LINK21
  • OLE_LINK22
  • OLE_LINK1
  • OLE_LINK2
• Leere Seite