Document Outline

• EC – declaration of conformity
• Certificate for the GS mark of conformity of the “Deutsche Gesetzliche Unfallversicherung e.V.“ (German Social Accident Insurance) DGUV
• Product registration
• 1. Safety
  • 1.1 Legal considerations
  • 1.2 Structure of the safety instructions
    • 1.2.1 Signal word panel
    • 1.2.2 Safety alert symbol
    • 1.2.3 Pictograms
    • 1.2.4 Word message panel structure
  • 1.3 Localization / position of safety labels at the unit
  • 1.4 Type plate
  • 1.5 General safety instructions on installing and operating the UF V freezer
  • 1.6 Intended use
  • 1.7 Operating instructions
  • 1.8 Measures to prevent accidents
• 2. Unit description
  • 2.1 Unit overview
  • 2.2 Housing of the automatic door mechanism with operator panel
  • 2.3 Key switch (main power switch)
  • 2.4 RP1 controller
  • 2.5 Connection panel on the unit rear
  • 2.6 Unit doors
    • 2.6.1 Outer door
    • 2.6.2 Compartment doors
    • 2.6.3 Emergency release of the outer door
  • 2.7 Drain well for condensate during defrosting (option)
• 3. Completeness of delivery, transportation, storage, and installation
  • 3.1 Unpacking, and checking equipment and completeness of delivery
  • 3.2 Guidelines for safe lifting and transportation
    • 3.2.1 Moving the freezer inside a building
    • 3.2.2 Transport outside a building
  • 3.3 Storage
  • 3.4 Location of installation and ambient conditions
  • 3.5 Adjusting the vertically adjustable castors
• 4. Installation and connections
  • 4.1 Operating instructions
  • 4.2 Spacers for rear wall distance
  • 4.3 Fixing to achieve earthquake safety (optional)
  • 4.4 10 mm access port prepared to be finalized by the user (UF V (E2.1), UF V-UL (E2.1))
  • 4.5 Adjustable shelves
  • 4.6 Electrical connection
  • 4.7 Advanced voltage booster (regular with UF V UL, option for UF V))
• 5. Start up
  • 5.1 Preset factory parameters
  • 5.2 Operating the automatic door mechanism
  • 5.3 Door locking with key (option for UF V UL)
  • 5.4 GUARD.CONTROL: RFID personal access control of the automatic door mechanism (standard for UF V, option for UF V UL)
    • 5.4.1 Indication of the door condition
    • 5.4.2 Overview of LED indications of the RFID personal access control
    • 5.4.3 Cards for access control
    • 5.4.4 Operating the RFID access control
    • 5.4.5 Reading out the door opening data with the GUARD.CONTROL Reader Kit (Art. no. 8012-0789)
    • 5.4.6 Resetting the entire system
  • 5.5 Behavior after turning on the unit
• 6. Setting the temperature set point at the controller RP1
• 7. Placing samples in storage in the freezer
• 8. Controller RP1 operating modes
  • 8.1 Selecting and setting the operating functions
  • 8.2 Operating mode HAND
  • 8.3 Operating mode USER: Advanced settings
  • 8.4 Operating mode LOCK: Locking/unlocking of the operating functions’ settings by operating mode HAND
    • 8.4.1 Locking the operating functions of operating mode HAND
    • 8.4.2 Temporally unlocking the operating functions of operating mode HAND
    • 8.4.3 Permanently unlocking the operating functions of operating mode HAND
  • 8.5 Performance during and after power failure and shut down
• 9. Safety controller (temperature safety device)
  • 9.1.1 Setting the safety controller set point
• 10. Indications and alarm functions (auto-diagnostic system)
  • 10.1 Indications and alarm functions overview
  • 10.2 Resetting the alarm messages
  • 10.3 Safety controller temperature alarm
  • 10.4 Temperature tolerance range alarm (too high and too low temperature)
  • 10.5 Door open alarm
  • 10.6 Messages from the battery management system
  • 10.7 Power failure alarm
  • 10.8 Temperature sensor failure
  • 10.9 Further error messages
  • 10.10 Zero-voltage relay alarm output
• 11. CO2 emergency cooling (option)
  • 11.1 Connecting and exchanging the CO2 pressure cylinder
  • 11.2 Operating the CO2 emergency cooling system
  • 11.3 Alarm messages
• 12. Data monitoring and recording
  • 12.1 Ethernet interface (option)
  • 12.2 Communication software APT-COM™ 3 DataControlSystem (option)
  • 12.3 Analog output for temperature
  • 12.4 Additional Pt 100 temperature sensor (option) with output to Lemo socket
  • 12.5 Circular chart recorder (option)
  • 12.6 Data logger (standard with UF V UL, option for UF V)
  • 12.7 BINDER GSM Box for remote alarms (option)
• 13. Unit inventory and accessories
  • 13.1 Storage rack systems (option)
    • 13.1.1 Side access racks
    • 13.1.2 Sliding drawer racks
    • 13.1.3 Cryo boxes and dividers
    • 13.1.4 Cardboard dividers for cryo boxes
    • 13.1.5 Polypropylene cryo boxes with dividers and codification, transparent
• 14. Maintenance, cleaning, and service
  • 14.1 Immediate aid, service
  • 14.2 Maintenance intervals, service
  • 14.3 Cleaning and decontamination
    • 14.3.1 Cleaning
    • 14.3.2 Decontamination
  • 14.4 Maintenance work by the customer
    • 14.4.1 Checking and cleaning the condenser air filter
    • 14.4.2 Cleaning the condenser
    • 14.4.3 De-icing and defrosting
  • 14.5 Sending the unit back to BINDER GmbH
• 15. Disposal
  • 15.1 Disposal of the transport packing
  • 15.2 Decommissioning
  • 15.3 Disposal of the unit in the Federal Republic of Germany
  • 15.4 Disposal of the unit in the member states of the EC except for the Federal Republic of Germany
  • 15.5 Disposal of the unit in non-member states of the EC
• 16. Troubleshooting
• 17. Overview of all controller indications
  • 17.1 Indications of setting menus
  • 17.2 Information and alarm messages
• 18. Technical description
  • 18.1 Factory calibration and adjustment
  • 18.2 Over current protection
  • 18.3 Battery replacement
  • 18.4 UF V (E2 / E2.1) technical data
  • 18.5 Equipment
  • 18.6 Optional equipment, accessories and spare parts
  • 18.7 Dimensions UF V 500 (E2)
  • 18.8 Dimensions UF V 500 (E2.1)
  • 18.9 Dimensions UF V 700 (E2.1)
• 19. Contamination clearance certificate
  • 19.1 For units located outside North America and Central America
  • 19.2 For units in North America and Central America
• Word-Lesezeichen
  • OLE_LINK11
  • OLE_LINK18
  • OLE_LINK20
  • OLE_LINK7
  • OLE_LINK9
  • OLE_LINK5
  • OLE_LINK6
  • OLE_LINK8
  • OLE_LINK3
  • OLE_LINK4
  • OLE_LINK16
  • OLE_LINK17
  • OLE_LINK10
  • OLE_LINK14
  • OLE_LINK15
  • OLE_LINK19
  • OLE_LINK1
  • OLE_LINK2
  • OLE_LINK25
  • OLE_LINK26
• Leere Seite