Document Outline

• EOS-1 sa HS
  • ■Precautions
  • Contents
  • Handling Precautions
    • Camera Care and Storage
    • LCD Displays
    • Lithium Batteries
    • How Low Battery Levels Affect Camera Operation
  • Nomenclature
    • Attaching the Strap
  • Basic Operation
    • Resetting the camera to the default settings
    • Open the side door and press the < CLEAR > button.
    • Resetting all Custom Functions except C.Fn-0 (^p.98) to the default settings
    • Open the side door, press the <c.Fn> button, then press the < CLEAR> button.
  • Installing the Battery and Checking the Battery Level
    • Remove the grip.
    • Open the cover.
    • install the battery.
    • Reattach the grip.
    • Turn the <©> to <ON>.
    • Battery Life (No. of Rolls)
  • Mounting and Detaching a Lens
    • Remove the caps.
    • Attach the lens.
    • On the lens, set the focus mode
    • switch to AF.
    • Remove the front lens cap.
    • While pressing the lens release button, turn the lens as shown by the arrow.
  • Dioptric Adjustment
    • Remove the eyecup.
    • Turn the dioptric adjustment
  • Film ID Imprinting
    • Press the < M.Fn > button to set the film ID setting mode.
    • Turn the < > dial to set the
    • Press the shutter button halfway.
    • When the film is loaded, the ID icon will be displayed on the LCD panel while the film ID is being imprinted, (^p.26)
  • Loading and Unloading Film
    • Open the camera back.
    • Insert the film cartridge at an
    • angle as shown in the figure.
    • Pull the edge of the film leader to the orange mark on the camera.
    • Close the camera back.
    • Press the < af > and < [H > buttons simultaneously.
    • Press the < Q±i > button.
    • Select <P> on the LCD panel.
    • Focus the subject.
  • Holding the Camera
  • AF Mode Selection
    • Set the lens focus mode switch to AF.
    • Set the AF mode.
    • * About Predictive AF
  • Area AF Ellipse and Focusing Points
    • Focusing points in the Area AF ellipse
  • Focusing Point Selection
    • Automatic Selection
      • Press the <d]> button and turn the dial.
    • Manual Selection
      • (1) Manual selection of 45 focusing points
      • (2) Manual selection limited to 11 focusing points
      • Selecting the center focusing point
    • Registering a Focusing Point
      • While pressing the <S> button, press the <fel> button.
    • Switching to the Registered Focusing Point
      • • C.Fn-17-1 Expanding the activation area to 7 points Hp.108)
  • Focusing an Off-Center Subject
  • When Autofocus Fails (Manual Focusing)
    • Manual Focusing
      • Set the lens focus mode switch to MF (or M on older lenses).
      • Focus by turning the lens focusing ring until the subject is in focus in the viewfinder.
  • Selecting a Metering Mode
  • Metering Modes
    • Evaluative Metering
    • [c] Partial Metering
    • H Spot Metering
    • CD Centerweighted Averaging Metering
    • Focusing Point-Linked Spot Metering
    • Multi-Spot Metering
    • Multi-Spot Metering Display
  • Tm Shutter Speed-Priority AE
    • While pressing the <mode> button, turn the dial until
    • Turn the < > dial to set the
    • Press the shutter button halfway and focus the subject.
    • Take the picture.
    • Exposure Warnings
  • Av Aperture-Priority AE
    • While pressing the <mode> button, turn the dial until
    • Turn the dial to set the
    • Press the shutter button halfway and focus the subject.
    • Take the picture.
    • Exposure Warnings
    • While pressing the <mode> button, turn the < > dial until
    • Exposure Warnings
  • M Manual Exposure
    • While pressing the <mode> button, turn the dial until
    • Set the < ^ > switch to < on >.
    • Turn the dial to set the
  • Setting Exposure Compensation
    • Set the < ^ > switch to < on >.
    • Focus the subject and check the exposure level.
    • Turn the <0> dial to set the
    • Press the <t^> button and turn < > dial within ((S6) to set the
    • desired exposure compensation amount.
  • Autoexposure Bracketing
    • Press the <mode> button and <AF> button simultaneously.
    • Turn the < ¿Si > dial to set the desired bracketing amount.
    • Take the pictures.
    • Canceling AEB
  • AE Lock
    • Press the <*> button (^6).
    • Recompose the shot and take the picture.
  • Setting the Film Speed Manually
    • Turn dial until the
    • Release the two buttons.
  • @] Multiple Exposure
    • Open the side door and press the <B> button.
  • Bulb Exposures
    • While pressing the <mode> button, turn the dial until
    • Set the <^> switch to <ON>, then turn the (or <0>) dial to
    • Start the bulb exposure.
  • Single-Frame and Continuous Shooting
    • Press the <mode> button and <[®]> button simultaneously.
    • Turn the <£^> dial to set the desired film advance mode.
    • When □, Q|, Oil, Q!|H,or Qi|H« Blinks
  • Self-timer Operation
  • Depth-of-field Preview
  • Mirror Lockup
  • LCD Panel Illumination
  • Using B/W Infrared Film
  • Flash Photography with Speedlite 550EX
    • Set the camera’s shooting mode to p.
    • Check that the SSOEX’s pilot lamp is lit.
    • Focus the subject.
    • Take the picture.
    • (1) When you want to use fill flash for a portrait and maintain background blur with a large aperture.
    • Check that the Speedlite’s pilot lamp is lit.
    • Focus the subject.
    • Compose the shot and take the picture.
    • Flash Exposure Compensation
    • FEB (Flash Exposure Bracketing)
    • Modeling Flash
      • Make sure the camera and Speedlite are properly set for flash photography.
      • Press the camera’s depth-of-field preview button.
    • Wireless, Multi-Speedlite System
      • Wireless, multi-Speedlite system
  • Using Other EOS-Dedicated Speedlites
    • (1)When you press the shutter button halfway, the shutter speed and aperture are set automatically by the camera as with normal picture-taking without flash.
    • (2) When you press the shutter button completely, TTL autoflash based on the aperture set in (1) is used.
    • (3) The background exposure is set by the shutter speed and aperture combination.
  • Using Non-Canon Flash Units
    • Sync Speed
    • PC Terminal
  • EOS-1 □ HS
    • Selecting and Setting a Custom Functions
      • Open the side door and press the <c.Fn> button.
      • Turn the dial until the
      • desired Custom Function No. appears.
      • Press the <c.Fn> button to change the Custom Function’s setting.
      • Press the shutter button halfway.
    • Canceling a Custom Function
      • C.Fn-9
        • Custom Function Group Registration
    • For EOS-1 VHS
    • Users
      • Attaching Grip GR-E2