Document Outline

• Canon
• EOS 060
  • Radio and Television Interference (VCCI Statement)
  • Test the Camera Before Shooting
  • About Copyrights
  • Equipment Check List
  • Contents
    • EOS D60
  • Handling Precautions
  • Quick Guide
    • Charge the battery pack.
    • Insert the battery pack.
    • cover.
    • (optional).
    • Focus on the subject.
    • Mount the lens.
    • switch on the lens to AF.
    • Turn on the camera.
    • (Full Auto).
    • Check the Image.
  • Nomenclature
    • LCD Panel
    • Mode Dial
  • Conventions Used in This Manual
  • Before You Start
    • Attaching the Strap
    • Charging the Battery Pack
      • Connect the power cord.
      • Remove the cover.
      • Place the battery in the adapter.
      • Charge the battery pack.
      • Inserting the Battery Pack
        • Open the battery chamber cover.
        • Insert the battery into the camera.
        • Close the cover.
      • Battery Level Icons
        • Battery Life
      • Removing the Battery Pack
        • Open the battery cover.
        • Remove the battery pack.
        • Close the battery cover.
      • Using a Household Power Supply
        • Connect the DC coupler.
        • Place the cord in the groove.
        • Insert the DC coupler into the camera.
        • Connect the power cord.
    • Mounting and Detaching a Lens
      • Mounting a Lens
        • Remove the caps.
        • Attach the lens.
        • Set the focus mode switch on the
        • lens to <AF>.
        • Remove the front lens cap.
      • Detaching a Lens
        • Press and hold the lens release button, and turn the lens as shown by the arrow.
    • Installing a CF Card
      • Open the cover.
      • Insert the CF card.
      • Close the cover.
      • Removing a CF Card
      • Open the cover.
      • Remove the CF card.
    • Basic Operation
      • Main Switch
      • Shutter Button
      • Using the Electronic Dials
        • Basic Operations with the <^> Dial
        • (1) Press a button and turn the <i^> dial.
        • (2) Just turn the <^> dial.
        • Basic Operations with the <0>‘ dial
        • (1) Press a button and turn the <Q> dial.
        • (2) Just turn the <0> dial.
      • LCD Monitor
      • Menu Functions and Settings
        • Menu Selections and Default Settings
    • Setting the Date and Time
      • From the Menu, select [Date/ Time].
      • Press the <0> button.
      • Set the date and time.
      • Select the order for the display.
      • Press the <@> button.
      • 1
    • Dioptric Adjustment in the Viewfinder
      • Turn the Dioptric Adjustment
      • Knob
    • Holding the Camera
  • Simple Picture
  • Taking
    • Fully Automatic Picture Taking
      • Set the Mode Dial to <D>.
      • Place one of the AF points on the subject.
      • Set the focus.
      • Check the display.
      • Take the picture.
      • Automatic Built-in Flash
      • AF-Assrst Beam
    • Check the Image Immediately
      • Take the picture.
      • H Check the Image in PLAY Mode
        • View the image.
        • Change the displayed image.
      • Checking the Image After it is Taken
        • From the Menu, select [Review].
        • Select the Review setting.
        • Take the picture.
        • MENU
      • Time for Image Review
        • From the Menu, select [Review time].
        • Set the review time.
        • Set the camera to Play mode.
        • Select the image you want to erase.
        • Open the Erase menu.
        • Erase the image.
        • Set the Mode Dial to
        • Set the Mode Dial to <^>.
        • Set the Mode Dial to < A>.
        • Set the Mode Dial to <‘^>.
    • Night Portrait Mode
      • Set the Mode Dial to <S>.
  • Advanced
  • Operations
    • Quality Selection
      • From the menu, select [Quality].
      • Set the quality.
    • ISO Speed
      • Select [ISO speed].
      • Set the ISO speed.
    • Setting Processing Parameters
      • From the menu, select [Parameters].
      • Select [Set].
      • Select the desired set number.
      • Select the parameter to be set.
      • Set the desired parameter setting.
      • Go back to step 1.
      • Select the desired set number.
    • AF Mode Selection
      • Set the lens focus mode switch to <AF>.
      • Set the Mode Dial to a Creative zone setting other than <A-DEP>.
      • Press the <wb > button. (06 )
      • Select the AF mode.
      • One-Shot AF for Still Subjects
        • Press the shutter button down halfway to activate AF operation and focus once.
      • Al Servo AF for Moving Subjects
        • Press and hold the shutter button down halfway, and the camera focuses continuously.
        • Predictive AF
      • Al Focus AF
    • AF Point Selection
      • Press the < [Ii3> button. ((2)6)
      • Select the AF point.
    • Focusing On an Off-Center Subject
      • Select an AF point.
      • Focus on the subject.
      • Hold the shutter button down halfway and recompose the picture.
      • Take the picture.
    • Problem Subjects for Autofocusing
      • Manual Focus
        • Set the lens focus mode switch to <MF> (or <M> on older lenses).
        • Focus on the subject.
        • Camera Setting Information
        • Display the camera settings.
    • Selecting a Metering Mode
      • Press the <^> button, (oe)
      • Select a metering mode.
    • Metering Modes
      • [®]: Evaluative Metering
      • : Partial Metering
      • CIl: Center-weighted Average Metering
    • Selecting a Drive Mode
      • Press the <DRIVE> button. (C)6)
      • Select the drive mode.
    • B Setting the White Balance
      • Press the <Sb > button, (oe)
      • Select the white balance setting.
    • White Balance Settings
    • Custom White Balance Setting
      • Photograph a white subject.
      • From the menu, select [Custom WB].
      • Select the image.
      • Press the <wb > button. {<2)6)
      • Select the white balance.
    • LCD Panel Illumination
      • On the menu, select [LCD illumi.] and set the LCD panel illumination.
      • Illuminating the LCD panel
    • Program AE
      • Set the Mode Dial to <P>.
      • Focus on the subject.
      • Check the display.
      • Take the picture.
      • Differences Between Program AE Mode <P> and Full Auto Mode <0>
      • Shifting the Program
    • Shutter-Priority AE
      • Set the Mode Dial to <Tv>.
      • Set the shutter speed.
      • Focus on the subject.
      • Check the display, then take the picture.
    • Aperture-Priority AE
      • Set the Mode Dial to <Av>.
      • Select the aperture value.
      • Focus on the subject.
      • Check the display, then take the picture.
    • Checking the Depth of Field
    • Manual Exposure
      • Set the Mode Dial to <M>.
      • Set the shutter speed.
      • cnn JC
      • Set the aperture value.
      • Focus on the subject.
      • Determine the exposure.
      • Take the picture.
      • Set the Mode Dial to <A-DEP>.
      • Focus the picture.
      • I-2.1.».1.2+ O
      • Check the display, then take the , picture.
    • Setting Exposure Compensation
      • Set the Quick Control Dial switch to <ON>.
      • Focus on the subject, then check the exposure level.
      • Set the exposure.
      • Take the picture.
    • Autoexposure Bracketing
      • Canceling AEB
        • From the menu, select [AEB].
        • Set the AEB level.
        • Take the picture.
    • AE Lock
      • Focus on the point on which you want to lock the exposure reading.
      • Press the <*> button.
      • Compose the shot and take the picture.
    • (S) Self-timer Operation
      • Select the self-timer.
      • Take the picture.
      • Using the Eyepiece Cover
        • Remove the eyecup.
        • Slip the eyepiece cover over the eyepiece.
    • Bulb Exposures
      • Set the Mode Dial to <M>.
      • Set the shutter speed to “buL b
      • Set the aperture value.
      • Take the picture.
    • Mirror Lockup
      • Press the shutter button down fully.
      • Press the shutter button down fully again.
• EOS 060
  • EOS
  • Using the Built-in Flash
    • E-TTL autoflash
    • • FE (Flash Exposure) lock (-^90)
    • @ Flash exposure compensation (->91)
    • Using the Built-in Flash in the Basic Zone
    • Using the Built-in Flash in the Creative Zone
    • Built-in Flash Range
    • Flash Sync Shutter Speed and Aperture Settings
      • MENU
    • Red-eye Reduction
      • From the menu, select [Red-eye on/off].
      • Set the Red-eye reduction function.
    • * FE Lock
      • Make sure the <^> ¡con In the viewfinder is on.
      • Focus on the subject.
      • Place the center AF point over the subject, and press the <*>
      • button. (C16)
      • Take the picture.
    • W Flash Exposure Compensation
      • Press the <%> button. (06)
      • -2.1.tP.
        • Set the exposure compensation amount.
        • E-TTL Autoflash
        • # High-Speed Sync (FP Flash) (->94)
        • • FE (Flash Exposure) Lock (->95)
        • ® Flash Exposure Compensation (^95)
        • # FEB (Flash Exposure Bracketing) (^94)
        • ® Modeling Flash (->95)
        • • Wireless Multi-Flash/E-TTL Autoflash (^95)
    • Full Auto Flash
      • Set the Mode Dial to <P>.
      • Make sure the 550EX Speedlite’s pilot lamp is on.
      • Focus the subject, and take the picture.
    • Taking Flash Pictures in Each Shooting Mode
    • Vh High-Speed Sync (FP Flash)
    • FEB (Flash Exposure Bracketing)
    • * FE Lock
    • Flash Exposure Compensation
    • Modeling Flash
      • Check that the camera and Speedlite are properly set for flash photography.
      • Press the camera’s depth-of-field preview button.
    • Wireless Multi-Flash/E-TTL Autoflash Shooting
  • Using Non-Canon Flash Units
    • Sync Speed
    • PC Terminal
  • TTL and A-TTL Speedlites
  • Playing and Erasing Recorded Images
    • About Image Data Taken or Recorded by Other Devices
    • About DPOF
    • Viewing Recorded Images
      • S Viewing a Single Image
        • Check the image.
        • Change the displayed image.
      • HA Viewing the Index
        • Press the <1H> button.
        • Display the index.
        • Change the image selection.
      • HA Viewing Enlarged Images
        • Select the image you want to enlarge from a single-image or index display. (-98)
        • Enlarge the image.
        • Change the display area.
      • JUMP Jumping to Another Image
        • Display a single image or index.
        • Change to jump display.
        • Jump to another image.
      • INFO. Turning the Information Display On and Off
        • Image Information Displayed During PLAY
        • Press the <INF0.> button
        • Histograms
        • Highlight Alert
        • MENU
      • Automated Playback of Recorded Images (Auto playback)
        • From the menu, select [Auto playback].
        • Start auto playback.
      • Rotating an Image
        • From the menu, select [Rotate].
        • Go to Rotate mode.
        • Rotate the image.
    • Protecting an Image
      • From the menu, select [Protect],
      • Open the Protect Settings screen.
      • Protect the image.
    • i Erasing Images (All Image Erase)
      • Set the camera to PLAY, (-^gs)
      • Press the <ra> button.
      • Turn the <0> dial to select [All...], then press the <©> button.
      • Turn the <0> dial to select [OK], then press the <©> button.
    • Formatting the CF Card
      • From the Menu, select [Format].
      • Press the <0> button.
      • Turn the <0> dial to select [OK], then press the <0> button.
    • Print Order
      • DPOF
      • Precautions for Printing from DPOF-compatible Devices
      • Selecting Images for Printing
        • Selecting a Single Image
        • From the menu, select [Print Order].
        • Press the <0> button.
        • Press the <0> button.
        • Select the images.
      • Print Type
      • Specifying Date Printing
      • Specifying File Number Printing
    • Connecting to a TV
      • Open the cover.
      • Connect the cable.
      • Turn the TV on, and set the input
      • switch to Video In.
      • Set the Main Switch to <ON>.
      • Press the <H> button.
    • Replacing the Date/Time Battery
    • File Numbering System
      • From the menu, select [File numbering].
      • Select the setting you want.
      • Insert the DC coupler (>26) and set the Main Switch to <ON>. (->28)
      • From the menu, select [C.Fn].
      • Press the <@> button.
      • Select [C.Fn-13].
      • Select [1: Enable].
      • Press the shutter button down fully.
      • Clean the imaging element.
      • Finish cleaning.
    • List of Menu Functions
      • Custom Function Settings
    • REFERENCE
      • Basic Terminology
        • AE
        • AF
        • Aperture value
        • CF (CompactFlash) Card
        • Depth of Field
        • DPOF
        • Exposure
        • File Numbering and Folders
        • Firmware
        • Format
        • ISO Speed
        • JPEG
        • RAW
        • Red-eye Phenomenon
        • Shutter Speed
      • Function Availability Table
      • AF Modes and Drive Modes
      • Program Line
        • Program Line Description
      • Shutter Speed and Aperture Value Readouts
        • Shutter speed readout
        • Aperture value readout
      • Message List
      • Error Codes
      • Troubleshooting
        • Power
        • Shooting
        • Checking and Handling Images
      • Major Accessories (Optional)
        • Battery Pack BP-511
        • Battery Grip BG-ED3
        • E-series Dioptric Adjustment Lenses
        • Shoe-mount Speedlites
        • Macro Fiash
        • Timer Remote ControllerTC-80N3
        • Remote Switch RS-80N3
        • CF Card
        • PC Card Adapter
      • Major Specifications
    • Index