Document Outline

• Fold-out page
  • Fig. A
  • Fig. B
  • Fig. C
  • Fig. D
  • Fig. E
• Operating manual
  • 1 User instructions
    • 1.1 Using this manual
    • 1.2 Warning signs and hazard icons
      • 1.2.1 Hazard symbols
      • 1.2.2 Degrees of danger
    • 1.3 Symbols used
    • 1.4 Abbreviations used
  • 2 Product description
    • 2.1 Main illustration
    • 2.2 Features
    • 2.3 Delivery package
      • 2.3.1 Complete system
      • 2.3.2 Basic device
    • 2.4 Rotors
      • 2.4.1 Special notes on the individual rotors
  • 3 Safety
    • 3.1 Intended use
    • 3.2 User profile
    • 3.3 Application limits
      • 3.3.1 Declaration concerning the ATEX directive (94/9/EC)
      • 3.3.2 Maximum service life for accessories
    • 3.4 Information on product liability
    • 3.5 Warnings for intended use
      • 3.5.1 Personal injury or damage to the equipment
      • 3.5.2 Incorrect handling of the device
      • 3.5.3 Incorrect handling of the rotors
      • 3.5.4 Extreme strain on the sample tubes
      • 3.5.5 Vacuum
    • 3.6 Safety instructions on the device
  • 4 Installation
    • 4.1 Selecting the location
    • 4.2 Preparing installation
      • 4.2.1 Open the packaging
      • 4.2.2 Lift the device out of the box
      • 4.2.3 Complete system: removing the transport protection screw
      • 4.2.4 Place the device upright
      • 4.2.5 Check the delivery
    • 4.3 Installing the instrument
      • 4.3.1 General Installation
      • 4.3.2 Complete system: connecting the emission condenser
      • 4.3.3 Complete system: connecting the gel dryer
      • 4.3.4 Basic device: connecting the vacuum pump
  • 5 Operation
    • 5.1 Overview of operating controls
    • 5.2 Functions
    • 5.3 Preparation for concentration
      • 5.3.1 Switching on the device
      • 5.3.2 Inserting the rotor
      • 5.3.3 Warm-up phase
      • 5.3.4 Loading a fixed-angle rotor
      • 5.3.5 Loading a swing-bucket rotor
      • 5.3.6 Closing the lid of the device
    • 5.4 Concentration
      • 5.4.1 Concentration with time setting
      • 5.4.2 Concentration with continuous run
      • 5.4.3 During or after concentration
      • 5.4.4 Completing an application
      • 5.4.5 Removing the rotor and switching off the device
      • 5.4.6 Emptying the emission condenser
    • 5.5 Notes on using rotors
      • 5.5.1 RotorA-2-VC
    • 5.6 Special function
      • 5.6.1 Operation as a desiccator
      • 5.6.2 Operation with gel dryer
      • 5.6.3 Operation as a centrifuge
  • 6 Maintenance
    • 6.1 Maintenance
      • 6.1.1 Device
      • 6.1.2 Pump
    • 6.2 Prepare cleaning / disinfection
    • 6.3 Cleaning / Disinfection
      • 6.3.1 Cleaning / Disinfecting the device
      • 6.3.2 Cleaning / Disinfecting the rotor
    • 6.4 Glass breakage
    • 6.5 Replacing fuses
    • 6.6 Decontamination before shipping
  • 7 Troubleshooting
    • 7.1 General errors
    • 7.2 Error messages
    • 7.3 Opening the device in case of a power failure
  • 8 Transport, storage and disposal
    • 8.1 Transport
    • 8.2 Storage
    • 8.3 Disposal
  • 9 Technical data
    • 9.1 Power supply
    • 9.2 Ambient conditions
    • 9.3 Weight / dimensions
    • 9.4 Diaphragm vacuum pump for the complete system
    • 9.5 Application parameters
  • 10 Ordering Information
    • 10.1 Complete system
    • 10.2 Basic device
    • 10.3 Fuses
    • 10.4 Accessories
      • 10.4.1 Rotors
      • 10.4.2 Adapters
      • 10.4.3 Other accessories
• Declarations and Certificates
  • CE
  • UL