Document Outline

• ESP Primer System Manual, p/n: 029-0810-01-0, Rev-A
  • NOTICE !
  • Contents
  • 1 Safety Precautions
    • 1.1 Definitions
    • 1.2 Guidelines
  • 2 Introduction
    • 2.1 ESP Primer Pump
      • Figure 2-1: Rotary Vane ESP Priming Pump
    • 2.2 SPV Priming Valve
      • Figure 2-2: SPV Overview
      • Overview
      • Configuration Options
        • Retrofit Kit Option
        • Universal Mount Installation Kit Option
        • Midship Pump Mounted Option
        • Primer Mounted on Midship Pump
    • 2.3 PVG Priming Valve
      • Figure 2-3: PVG Priming Valves
    • 2.4 Lubricated ESP Primer System
      • Figure 2-4: Typical ESP Lubricated System
      • Chart 2-5: Typical Freeze-Up Protection
  • 3 System Installation
    • 3.1 Primer Pump
      • Installation Notes
        • Figure 3-1: Solenoid Connector Arrangement
      • Optional Bracket Installation
      • ESP System Plate Drawings
    • 3.2 Valve Installation, SPV or PVG
      • Figure 3-2: Typical Hale SPV Typical System Layout
      • SPV Placard and Pushbutton
        • Figure 3-3: SPV Pushbutton Placard Overview
      • SPV Retrofit Installation, Midship
        • Figure 3-4: Typical SPV / Midship Pump Installation
        • Figure 3-5: SPV Retrofit Panel Placard Spacer Layout
      • SPV Retrofit Installation, Universal Mount
        • Figure 3-6: Typical SPV / Universal Adapter Pump Installation
        • Figure 3-7: Universal Mount Adapter Dimensions
        • Figure 3-8: Universal Mount Adapter Positions
      • PVG Installation
        • Figure 3-9: PVG Panel Placard and Valve Plumbing Layout
    • 3.3 Lubricated Primer Installation
      • Installation
        • Figure 3-10: Typical ESP Lubricated Primer Layout
        • Figure 3-11: Pump Fittings
  • 4 Primer Operation
    • 4.1 Priming the Pump
  • 5 System Maintenance
    • 5.1 General Maintenance
      • Weekly
        • Priming System Test
      • Monthly
        • Priming System Test, Dry Vacuum Test
        • Figure 5-1: PVG Priming Valve Handle
      • Annually
        • Clean ESP Priming Pump
        • Figure 5-2: Primer Pump Parts Overview
    • 5.2 SPV Valve Repair
      • Figure 5-3: Hale SPV Parts Overview
    • 5.3 PVG Valve Repair
      • Figure 5-4: Hale PVG Parts Overview
      • Figure 5-5: PVG Valve Parts Breakdown
      • Reassembly Hints
    • 5.4 Lubricant Specifications
      • Grease, for O-ring Seals
      • Loctite Sealant
      • Recommended Cleaners
      • Lubricants
  • 6 Troubleshooting
    • Pump Loses Prime or Will Not Prime.
    • Primer Solenoid - 12VDC and 24VDC
    • Switch is dead - no click is heard.
    • Switch chatters, pops or clicks, but the motor does not work.
    • Switch stays ON (sticks) - motor keeps running.
    • Figure 6-1: Troubleshooting Chart
    • Figure 6-2: 12VDC Solenoid Arrangement Troubleshooting
    • Figure 6-3: 24VDC Solenoid Arrangement Troubleshooting
  • Express Warranty
    • Hale Products, Inc.
  • Drawing Package
    • 12 Volt ESP System
    • 24 Volt ESP System
    • Priming Valves, PVG / SPV
• Return HOME Page
• EXIT