Document Outline

• Finishing accessory overview
  • HP LaserJet Enterprise M806 and HP LaserJet Enterprise flow MFP M830
    • HP LaserJet Enterprise M806 product specifications
      • Technical specifications
      • Product dimensions
      • Power consumption, electrical specifications, and acoustic emissions
        • Power consumption
        • Electrical specifications
        • Acoustic emissions
      • Operating-environment range
    • HP LaserJet Enterprise flow MFP M830 product specifications
      • Technical specifications
      • Product dimensions
      • Power consumption, electrical specifications, and acoustic emissions
        • Power consumption
        • Electrical specifications
        • Acoustic emissions
      • Operating-environment range
    • Stapler/stacker
    • Stapler/stacker with hole punch
    • Booklet maker
  • HP Color LaserJet Enterprise M855 and HP Color LaserJet Enterprise flow MFP M880
    • HP Color LaserJet Enterprise M855 product specifications
      • Technical specifications
      • Product dimensions
      • Power consumption, electrical specifications, and acoustic emissions
        • Power consumption
        • Electrical specifications
        • Acoustic emissions
      • Operating-environment range
    • HP Color LaserJet Enterprise flow MFP M880 product specifications
      • Technical specifications
      • Product dimensions
      • Power consumption, electrical specifications, and acoustic emissions
        • Power consumption
        • Electrical specifications
        • Acoustic emissions
      • Operating-environment range
    • Stapler/stacker and stapler/stacker with hole punch
    • Stapler/stacker booklet maker and stapler/stacker booklet maker with hole punch
  • Finishing accessory specifications
    • Accessory specifications
    • Stapler/stacker output-bin capacities
    • Booklet-maker output-bin capacities
• Install and configure the finishing accessories
  • Install or replace a stapler/stacker or stapler/stacker with hole punch accessory for the HP LaserJe ...
    • Introduction
    • Before you begin
    • Required tools
    • Step one: Remove the stapler/stacker
    • Step two: Unpack the optional or replacement stapler/stacker accessory
    • Step three: Install the optional or replacement stapler/stacker accessory
    • Step four: Parts return
    • Step five: Configure the default hole punch location
    • Step six: Configure the default staple location
  • Install or replace a stapler/stacker with booklet maker accessory for the HP LaserJet Enterprise M80 ...
    • Introduction
    • Before you begin
    • Required tools
    • Step one: Remove the booklet maker
    • Step two: Unpack the optional or replacement booklet maker accessory
    • Step three: Install the optional or replacement booklet maker accessory
    • Step four: Parts return
    • Step five: Configure the booklet maker in the HP Embedded Web Server (EWS)
      • 1: Connect to the EWS
      • 2: Configure the Paper Selection feature
      • 3: Configure the Sides feature for single or duplex printing
      • 4: Configure the Booklet feature
    • Step six: Configure the default staple location
  • Install or replace a stapler/stacker or stapler/stacker with hole punch accessory for the HP Color L ...
    • Introduction
    • Before you begin
    • Required tools
    • Step one: remove the stapler/stacker
    • Step two: Unpack the optional or replacement stapler/stacker
    • Step three: Install the optional or replacement stapler/stacker
    • Step four: Parts return
    • Step five: Configure the default hole punch location
    • Step six: Configure the default staple location
  • Install or replace the booklet maker or booklet maker hole punch accessory for the HP Color LaserJet ...
    • Introduction
    • Before you begin
    • Required tools
    • Step one: Remove the booklet maker
    • Step two: Unpack the optional or replacement booklet maker accessory
    • Step three: Install the optional or replacement booklet maker accessory
    • Step four: Parts return
    • Step five: Configure the booklet maker in the Embedded Web Server (EWS)
      • 1: Connect to the EWS
      • 2: Configure the Paper Selection feature
      • 3: Configure the Sides feature for single or duplex printing
      • 4: Configure the Booklet feature
    • Step six: Configure the default hole punch location
    • Step seven: Configure the default staple location
  • Configure the product for Mailbox Mode or Stacker Mode
    • Step one: Access the HP Embedded Web Server (EWS)
    • Step two: Configure Mailbox Mode or Stacker Mode from the Embedded Web Server (EWS)
    • Step three: Configure the Stapler/Stacker settings
    • Step four: Configure the Staple/Collate settings
    • Step five: Configure the Hole Punch functionality
    • Step six: Configure the Output Bin
  • Configure the HP printer driver for Windows® 7, 8, 8.1, and OS X for Mailbox Mode or Stacker Mode
    • Windows® 7
    • Windows® 8.0 and 8.1
    • OS X
• Supported paper sizes and types for finishing accessories
  • HP LaserJet Enterprise M806 and HP LaserJet Enterprise flow MFP M830
  • HP Color LaserJet Enterprise M855 and HP Color LaserJet Enterprise flow MFP M880
  • Paper loading and orientation
    • Introduction
    • Face-up and face-down printing
    • Tray 1 paper orientation
    • Tray 2, 3, 4, and 5 paper orientation
    • 3x500-sheet tray paper orientation
• How to use the hole punch (optional finishing accessory)
  • Introduction
  • Device output options
    • Introduction
    • Hole punch only output options
      • 2 Hole punch
      • 3 Hole punch
      • 4 Hole punch
    • Hole punch and staple output options
      • 2 Hole punch and 1 staple
      • 2 Hole punch and 2 staples
      • 3 Hole punch and 1 staple
      • 3 Hole punch and 2 staples
      • 4 Hole punch and 1 staple
      • 4 Hole punch and 2 staples
  • Hole punch when copying from the Automatic Document Feeder (ADF) optional accessory
  • Hole punch when printing from a Windows® application (optional accessory) using an HP UPD print driv ...
  • Hole punch when printing from an OS X application (optional accessory) using an HP print driver
• How to use the staple/collate feature (optional finishing accessory)
  • Introduction
  • Device output options
    • Introduction
    • Staple only output options
      • 1 Staple
      • 2 Staples
    • Staple and hole punch output options
      • 1 Staple and 2 hole punch
      • 1 Staple and 3 hole punch
      • 1 Staple and 4 hole punch
      • 2 Staples and 2 hole punch
      • 2 Staples and 3 hole punch
      • 2 Staples and 4 hole punch
  • Staple/collate when copying from the Automatic Document Feeder (ADF) optional accessory
  • Staple/collate when printing from a Windows® application (optional accessory) using an HP UPD print ...
  • Staple/collate when printing from an OS X application using an HP print driver
• How to print booklets (optional finishing accessory)
  • Introduction
  • Create and use booklet printing shortcuts
    • Create a booklet printing shortcut in a Windows® application using an HP UPD print driver or HP PCL ...
    • Create a booklet printing preset shortcut in a OS X application using an HP print driver
    • Create a Quick Sets shortcut from the HP Embedded Web Server (EWS)
      • Connect to the Embedded Web Server (EWS)
      • Configure the Quick Sets shortcut
        • Step one: Set the button location for the Quick Set and options for user interaction at the control ...
        • Step two: Set the Paper Selection
  • Print a booklet from the computer using an HP UPD print driver or HP PCL 6 product specific print dr ...
    • Windows®
    • OS X
  • Create a booklet in Microsoft® Publisher (Windows®)
    • Create a booklet in Microsoft® Publisher 2003
    • Create a booklet in Microsoft® Publisher 2010 or 2013
  • Make a booklet in Adobe® Reader XI (Windows®)
  • Make a booklet when copying from the Automatic Document Feeder (ADF) optional accessory