Karcher K 3.350 Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for K 3.350 Karcher
Manuals
| Recognized languages: | English Español Français |
|---|---|
| Pages: | 60 |
| Size: | 4.49 MB |
Show table of contents
Read manual
Document Outline
- K 3.350
- OBJ_DOKU-78062-001.pdf
- HIGH PRESSURE WASHER OPERATOR MANUAL
- Safety Alert Symbols
- m DANGER
- indicates “an imminently hazardous situation which, if not avoided, will result in death or serious injury.”
- m WARNING
- indicates “a potentially hazardous situation which, if not avoided, could result in death or injury.”
- m CAUTION
- indicates “a potentially hazardous situation which, if not avoided, may result in minor or moderate injury or in property damage incidents.”
- Specifications
- Max. Pressure
- 1800 PSI
- Max. Water Flow
- 1.5 GPM
- Amp draw
- 13 AMPS
- Voltage
- 120 V
- Part No.
- 1.602-700.0
- Serial no.
- For household use only!
- Owner/User Responsibility
- The owner and/or user must have an understanding of the manufacturer’s operating instructions and warnings before using this pressure washer.
- Warning information should be emphasized and understood.
- If the operator is not fluent in English, the manufacturer’s instructions and warnings shall be read to and discussed with the operator in the operator’s native language by the purchaser/ owner, making sure that the operator comprehends its contents
- Owner and/or user must study and maintain for future reference the manufacturers’ instructions.
- Customer Support USA and Canada
- In the U.S. or Canada, please call 1-800-537-4129 for warranty issues and visit www.karcher-help.com for technical support and product assistance.
- Please take a moment to register your pressure washer online at www.karcher-register.com. Be sure to save your purchase receipt, it will be required for repairs covered by warranty.
- Customer Support Mexico
- Call: 01-800-024-13-13 for help or visit our website: www.karcher.com.mx
- IMPORTANT SAFETY INSTRUCTIONS
- m WARNING
- When using this product basic precautions should always be followed, including the following:
- To reduce the risk of injury, close supervision is necessary when a product is used near children.
- Know how to stop the product and bleed pressures quickly. Be thoroughly familiar with the controls.
- Stay alert – watch what you are doing.
- Do not operate the product when fatigued or under the influence of alcohol or drugs.
- Keep operating area clear of all persons.
- Do not overreach or stand on unstable support. Keep good footing and balance at all times.
- Follow the maintenance instructions specified in the manual.
- This product is provided with a Ground Fault Circuit Interrupter built into the power cord plug. If replacement of the plug or cord is needed, use only identical replacement parts.
- m WARNING
- Risk of Injection or Injury – Do Not Direct Discharge Stream At Persons.
- High pressure jets can be dangerous if misused. The jet must not be directed at persons, animals, electrical devices, or the unit itself.
- Wear safety goggles.
- m WARNING
- Risk Of Explosion – Do not spray flammable liquids.
- Do not use acids, alkaline, solvents, or any flammable material in this product. These products can cause physical injuries to the operator and irreversible damage to the machine.
- m CAUTION
- Gun Kicks Back – Hold with both hands.
- The Trigger Gun Safety Lock prevents the trigger from accidentally being engaged. This safety feature DOES NOT lock trigger in the ON position.
- m WARNING – Risk of Electrocution
- Inspect cord before using – Do not use if cord is damaged.
- Keep all connections dry and off the ground.
- Do not touch plug with wet hands.
- Do not use extension cord with this product.
- Connect to individual branch circuit only.
- m CAUTION
- This unit has been designed for use with cleaning detergents recommended by the manufacturer. The use of other cleaning detergents may affect the operation of the machine and void the warranty.
- m WARNING
- Do not spray electrical apparatus and wiring.
- Do not use with flammable liquids and toxic chemicals.
- Injection hazard: equipment can cause serious injury if the spray penetrates the skin. do not point the gun at anyone or any part of the body. In case of penetration seek medical aid immediately.
- This system is capable of producing 12400 kPa /1800 PSI to avoid rupture and injury, do not operate this pump with components rated less than 12400 kPa /1800 PSI working pressure (including but not limited to spray guns, hose and hose connections).
- Before servicing, cleaning or removing any parts, shut off power and relieve pressure.
- GROUNDING INSTRUCTIONS
- This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock. This product is equipped with a cord having an equipment-grounding conducto...
- m DANGER
- Improper connection of the equipment- grounding conductor can result in a risk of electrocution. Check with a qualified electrician or service personnel if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provide...
- GROUND FAULT CIRCUIT INTERRUPTER PROTECTION
- This pressure washer is provided with a ground-fault circuit-interrupter (GFCI) built into the plug of the power-supply cord. This device provides additional protection from the risk of electric shock. Should replacement of the plug or cord become ne...
- WATER SUPPLY (Cold Water Only)
- m CAUTION
- When connecting the water inlet to the water supply mains, local regulations of your water company must be observed. In some areas the unit must not be connected directly to the public drinking water supply. This is to ensure that there is no feedbac...
- Dirt in the feed water will damage the unit. To avoid this risk, we recommend fitting a water filter.
- Garden hose must be at least 1/2 inch or 5/8 inch in diameter.
- Flow rate of water supply must not fall below 2 GPM (gallons per minute).
- Flow rate can be determined by running the water for one minute into an empty 5-gallon container.
- The water supply temperature must not exceed 104°F/40°C.
- Never use the pressure washer to draw in water contaminated with solvents, e.g. paint thinners, gasoline, oil, etc.
- Always prevent debris from being drawn into the unit by using a clean water source.
- USING THE ACCESSORIES
- m WARNING
- To avoid serious injury never point spray nozzle at yourself, other persons or animals.
- Always test an inconspicuous area before cleaning with high pressure.
- Vario Power Spray Wand
- The Vario Power Spray Wand allows you to adjust the cleaning pressure.
- To clean at maximum pressure, the wand must be positioned to the high pressure setting (Max).
- For lower pressure turn the wand collar in the minus (Min) direction.
- To apply detergent, the wand must be positioned to the lower pressure setting (Mix).
- Dirtblaster ®
- This nozzle features a 0º pencil jet which rotates 360º for maximum dirt cutting action, effectively increasing cleaning performance up to 50%. This nozzle combines the cleaning performance of a 0º pencil jet with the surface coverage of a wide an...
- Not recommended for soft materials, siding, painted surfaces, decks or autos.
- Before cleaning any surface an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.
- WORKING WITH DETERGENTS
- Detergents can only be applied at low pressure setting (Mix).
- STEP 1:
- Install the Vario Power Spray Wand. Set the spray wand to the low pressure setting (Mix).
- STEP 2:
- Fill the Detergent Tank with the selected detergent.
- STEP 3:
- Turn on the pressure washer (I). Pull trigger to operate unit. Liquid detergent is drawn into the unit and mixed with water. Apply detergent to work area. Do not allow detergent to dry on surface.
- STEP 4:
- To rinse, move the VPS out of „Mix“ position and pull trigger to operate unit.
- STEP 5:
- Cleaning up: Always draw fresh water through the detergent tank or siphon tube when done to flush any remaining detergents from the injection system.
- For best results see Cleaning Tips for specific information on how to clean different surfaces.
- Always Use Kärcher ® Detergent for Best Results
- Kärcher ® biodegradable detergents are specially formulated to protect the environment and your pressure washer. The special formula won’t clog the suction tube filter and will protect the internal parts of the pressure washer for a longer life. ...
- www.buykarcher.com
- m CAUTION
- Never use:
- – Bleach, Chlorine products and other corrosive chemicals
- – Liquids containing solvents (i.e., paint thinners, gasoline, oils)
- – Tri-sodium phosphate products
- – Ammonia products
- – Acid-based products
- These chemicals will harm the unit and will damage the surface being cleaned.
- Use of these items will void the warranty.
- TAKING A BREAK ..five minutes or more
- STEP 1:
- Release trigger and engage gun safety lock.
- STEP 2:
- Turn pressure washer to OFF (0) position.
- WINTERIZING AND LONG-TERM STORAGE
- 1: Disconnect all water connections.
- 2: Turn on the machine for a few seconds, until the water which had remained in the pump exits, turn off immediately.
- 3: Do not allow high pressure hose to become kinked.
- 4: Store the machine and accessories in a room which does not reach freezing temperatures. DO NOT store near furnace or other sources of heat as it may dry out the pump seals.
- m CAUTION
- Failure to follow the above directions will result in damage to the pump assembly and accessories and will void the warranty.
- Kärcher ® also recommends the regular practice of using a pump protector like “Kärcher ® Pump Guard” to prevent cold weather damage during storage in the winter months.
- CARE AND MAINTENANCE INSTRUCTIONS
- Cleaning the water inlet filter
- STEP 1:
- Pull out water inlet filter with flat- nose pliers.
- STEP 2:
- Rinse out water inlet filter in warm water.
- STEP 3:
- Reinsert water inlet filter.
- Maintenance
- The unit is maintenance-free.
- CLEANING TIPS
- m CAUTION
- Before cleaning any surface an inconspicuous area should be cleaned to test spray pattern and distance for maximum cleaning results.
- If painted surfaces are peeling or chipping, use extreme caution as pressure washer may remove the loose paint from the surface.
- When using on surfaces which might come in contact with food, flush surfaces with plenty of drinking water.
- For additional cleaning tips and a complete video library, visit our website:
- www.karcherresidential.com
- Deck Cleaning
- (with or without detergent). Pre-rinse deck and surrounding area with fresh water. If using detergent, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow detergent to re...
- House Siding
- (with or without detergent). Pre-rinse cleaning surface with fresh water. If using detergent, apply to surface at low pressure (for best results, limit your work area to sections of approximately 6 feet and always apply detergent from bottom to top)....
- Cement Patios, Brick and Stone
- (with or without detergent). Pre-rinse cleaning surface with fresh water. If using detergent or Degreaser, apply to surface at low pressure. For best results, limit your work area to smaller sections of approximately 25 square feet. Allow detergent o...
- Cars, Boats & Motorcycles
- (with or without detergent). Pre-rinse vehicle with fresh water. If using detergent, apply to surface at low pressure. For best results, clean one side of vehicle at a time and always apply detergent from bottom to top, do not allow detergent to dry ...
- Barbecue Grills, Outdoor Power Equipment & Gardening Tools
- (with or without detergent). Pre-rinse cleaning surface with fresh water. If using detergent or Degreaser, apply detergent at low pressure. Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. Rinse at high pres...
- Patio & Lawn Furniture
- (with or without detergent). Pre-rinse furniture and surrounding area with fresh water. If using detergent, apply to surface at low pressure. Allow detergent to remain on surface 1-3 minutes. Do not allow detergent to dry on surface. If needed use sp...
- OPTIONAL CLEANING ACCESSORIES
- Optional accessories are available to further enhance your cleaning capabilities. These accessories are accurate as of the printing date of this manual. Please check our website for pricing and up-to-date information.
- Pump Guard
- Specially formulated to protect your pressure washer from freezing, corrosion and premature wear. The Pump Guard also adds lubrication to valves and seals to prevent sticking. Highly recommended for all Kärcher ® pressure washers!
- Part No. 9.558-998.0
- 25 Ft. Extension High-Pressure Hose
- Extension Hose for all Kärcher ® high pressure washers between the original equipment hose and gun up to 2000 PSI.
- Part No. 2.642-588.0
- 66" Extension Wand (Four piece)
- Need to clean second story windows or other high areas? Increase the reach of your pressure washer by up to 66" with this extension kit. Includes 4 aluminum sections for variable length. 66" fully assembled. Fits most Kärcher ® pressure washers up ...
- Part No. 2.640-746.0
- Rotating Wash Brush (bayonet)
- For more effortless cleaning of all smooth surfaces (painted, glass and plastic) try the Kärcher ® Rotating Wash Brush. Use it on your automobile, house siding or windows. The water pressure from your pressure washer causes the inner brushes to gen...
- Part No. 2.640-743.0
- Soft Clean Washing Brush
- Made with soft bristles that will not harm painted surfaces. Easily attaches directly to the trigger gun. Ideal for stubborn dirt on cars, boats, patio furniture and other surfaces. Great for applying detergent. Fits most Kärcher ® pressure washers...
- Part No. 2.640-740.0
- 25 ft. Pipe Cleaning Kit (bayonet)
- Need to clean blocked pipes, drains or downspouts? The Kärcher ® pipe cleaning kit is the answer! The pipe cleaner propels itself forward while simultaneously flushing out debris. For example, insert the cleaning nozzle in the base of a downspout, ...
- Part No. 2.640-747.0
- Wet Sandblasting Kit (bayonet)
- Why spend hours stripping old paint and rust by hand using harsh chemicals? Let the Kärcher ® Wet Sandblasting Kit do the work! Attach the kit to your pressure washer, add abrasive material and attack the rust and paint with our eco-friendly altern...
- Part No. 2.638-792.0
- Detergent Foamer Attachment
- Ideal for applications which require a thick foam. Simply fill the resevoir cup with liquid pressure washer detergent to generate a foam spray. Connects directly to the trigger gun. Fits most Kärcher ® pressure washers up to 2300 PSI. (bayonet)
- Part No. 6.964-507.0
- T 200 Wide Area Surface Cleaner
- For cleaning surfaces such as patios, terraces and driveways without splashback, there is no better solution than the Kärcher ® T 200. It saves time by cleaning a one foot wide area gently as it hovers, providing consistent, streak- free cleaning. ...
- Part No. 2.642-188.0
- TROUBLESHOOTING
- m CAUTION
- Disconnect the machine from the power source before making any repair.
- Symptom
- Cause
- Solution
- Motor will not start
- On/Off switch is in the “OFF” (0) position.
- Turn switch to the “ON” (I) position
- Power cord is not plugged in.
- Plug in power cord.
- Electrical outlet does not supply adequate power.
- Try a different outlet.
- Tripped GFCI plug.
- Press “RESET” button on GFCI plug.
- Tripped circuit breaker.
- Switch off pressure washer. The reset comes automatically once the temperature of the unit drops.
- Unit does not reach high pressure.
- Diameter of garden hose is too small.
- Replace with a 5/8 inch or larger garden hose.
- Water supply is restricted.
- Check garden hose for kinks, leaks and blockage.
- Not enough inlet water supply.
- Open water source full force.
- Water inlet filter is clogged.
- Remove filter and rinse out in warm water.
- Spray wand is on low pressure position.
- Turn spray wand to high pressure position.
- Output pressure varies high and low.
- Not enough inlet water supply.
- Turn water on full force. Check garden hose for kinks, leaks or blockage.
- Pump is sucking air.
- Check that hoses and fittings are air tight. Turn off machine and purge pump by squeezing trigger gun until a steady flow of water emerges through the nozzle.
- Water inlet filter is clogged.
- Remove filter and rinse out in warm water.
- Discharge nozzle is obstructed.
- Blow out or remove debris with a fine needle.
- Calcified gun, hose or spray wand.
- Run distilled vinegar through detergent suction tube.
- No detergent.
- Detergent suction tube not properly connected to the machine.
- Check connection.
- Detergent is too thick.
- Dilute detergent, for best results use Kärcher ® detergent.
- Filter on detergent suction tube is clogged.
- Run warm water through filter to remove debris.
- Damaged or clogged detergent suction tube.
- Remove obstruction or replace detergent suction tube.
- Spray wand is in high pressure position.
- Turn spray wand tip to low pressure position.
- Discharge nozzle is obstructed.
- Blow out or remove debris with fine needle.
- Garden hose connection leaks.
- Loose fittings.
- Tighten fittings.
- Missing/worn rubber washer.
- Insert new washer.
- Spray wand leaks.
- Spray wand not properly attached.
- Insert the spray wand into the trigger gun. Carefully press in against the spring tension and twist into the locked position.
- Broken o-ring or plastic insert.
- Call Customer Support
- Pump is noisy.
- Pump is sucking air.
- Check that hoses and fittings are air tight. Turn off machine and purge pump by squeezing trigger gun until a steady flow of water emerges through the nozzle.
- Water leaks from pump (up to 10 drops per minute is permissible).
- Loose fittings.
- Check that all fittings are tight.
- Water seals are damaged or worn.
- Call Customer Support
- Oil Drip.
- Oil seals are damaged or worn.
- Call Customer Support
- If you encounter any additional difficulties not listed, please visit our website.
- USA / Canada: www.karcher-help.com
- México: www.karcher.com.mx