Document Outline

• OWNER'S MANUAL
• With High Performance Vaive
  • WARRANTY ON WATER SOFTENER
    • ONE YEAR LIMITED WARRANTY ON WATER SOFTENER
    • THREE YEAR LIMITED WARRANTY ON ELECTRONIC FARTS
    • TEN YEAR LIMITED WARRANTY AGAINST LEAKS
    • This warranty covers only defects in material and workmanship. Sears will NOT pay for:
    • Disclaimer of implied warranties; limitation of remedies
    • Sears, Roebuck and Co., Hoffman Estates, IL 60179 Sears Canada Inc., Toronto, Ontario, Canada MSB 2B8
  • TABLE OF CONTENTS
• Safety Guides
• Unpack and Check Your Carton
  • INSPECT SHIPMENT
  • PARTS DESCRIPTIONS
• Plan Your Installation
  • PLAN YOUR INSTALLATION
  • TOOLS NEEDED:
  • WHERE TO INSTALL THE WATER SOFTENER
  • Suggested Slab Foundation Installation
    • DRAW IN YOUR PIPES AND FITTINGS
    • PIPE, FITTINGS, OTHER MATERIALS NEEDED
    • SOLDERED
    • OUT
• Read Before Beginning Installation
  • BEFORE INSTALLING CHECKS & TESTS
• Install Single Bypass Valve
  • ASSEMBLE INLET OUTLET ADAPTORS,
  • OR SINGLE BYPASS VALVE
    • FIG. 7
    • FIG. 8
  • BYPASS VALVE:
  • INLET AND OUTLET THREADED ADAPTORS:
  • INSTALLING BYPASS VALVE, AND/OR INLET AND OUTLET THREADED ADAPTORS
• Install Single Bypass Valve
• Install 3-Valve Bypass
  • INSTALLING 3 VALVE BYPASS AND PIPES
• Locate Water Softener and Connect Pipes
  • POSITION SOFTENER INTO PLACE
  • CONNECT THE SOFTENER
  • MOVE SOFTENER INTO PLACE
  • TYPICAL SOLDERING CONNECTIONS
    • FIG. 15
• Connect Valve and Salt Tank Drains
  • CONNECT THE VALVE DRAIN HOSE
  • CONNECT SALT TANK OVERFLOW TUBING
    • FIG. 16
• Leak Test
  • LEAK TEST
    • 6. Close both cold water faucets.
  • HOUSE MAIN WATER
  • VALVE BYPASS
    • FIG. 19
• Electrical Requirements
  • INSTALL GROUNDING CLAMP BETWEEN THE SOFTENER IN AND OUT PIPES
  • ELECTRICAL POWER OUTLET FOR YOUR SOFTENER
  • PLUG IN THE TRANSFORMER
• Install Covers and Restart Water Heater
  • INSTALL COVERS
  • RESTART THE WATER HEATER
    • YOUR PLUMBING INSTALLATION AND ELECTRICAL WORK ARE NOW COMPLETE.
• Program The Timer
  • PROGRAM THE TIMER
    • FIG. 24
    • FIG. 25
• Program The Timer
  • SET PRESENT TIME OF DAY
    • FIG. 26
  • SET WATER HARDNESS NUMBER
    • FIG. 27
• Program The Timer
  • SET REGENERATION TIME
• Sanitize The Water Softener
  • SANITIZE THE WATER SOFTENER
    • SANITIZE YOUR WATER SOFTENER AS FOLLOWS:
    • You can sanitize the softener with or without salt in the storage tank.
• Adding Salt To The Storage Tank
  • ADDING SALT TO THE STORAGE TANK
  • WATER SOFTENING SALT WITH IRON REMOVING ADDITIVES
• Check
  • CHECK LIST OF STEP-BY-STEP GUIDES TO INSTALL
    • FIG. 32
  • EXTRA RECHARGE
  • RECHARGE NOW
  • RECHARGE TONIGHT
  • MENU SELECTIONS:
  • SETTINGS:
    • FIG. 33
    • FIG. 34
    • FIG. 35
    • FIG. 36
    • FIG. 38
    • FIG. 39
    • FIG. 40
  • OPTIONS:
    • FIG. 41
    • FIG. 42
    • FIG. 44
    • FIG. 45
  • UNITS:
    • FIG. 48
  • SERVICE MODE:
  • KENMORE’S ULTRA CLEANSING FEATURE
  • SOFT W/VTER SERVICE AND REGENERATION SERVICE
    • REGENERATION
  • SOFT W/VTER SERVICE AND REGENERATION
  • WATER FLOW THROUGH THE SOFTENER IN BRINING AND BRINE RINSE
  • WATER FLOW THROUGH THE SOFTENER IN BACKWASH
    • SOFT WATER SERVICE AND REGENERATION AUTOMATIC BYPASS
      • ELECTRONICS
  • WATER FLOW THROUGH THE SOFTENER IN FAST RINSE
    • SALT BRIDGE
    • KEEPING THE W/VTER SOFTENER CLEAN NOZZLE & VENTURI
      • 7. Install and tighten the cap, by hand only. Do not overtighten, which may break the cap or housing.
    • IRON FROM RESIN BED
    • PROTECT THE WATER SOFTENER FROM FREEZING
    • CHECKLIST TO HELP YOU SAVE MONEY
    • BYPASS VALVES
      • FIG. 59
    • MODEL NO. 625.384260 - TIMER CODE H46
  • Pressure Drop (PSI) vs. Flow Rate (GPM)
    • FIG. 60
  • FACEPLATE
    • FIG. 61
    • ALWAYS MAKE THESE INITIAL CHECKS FIRST
      • FIG. 62
      • POSSIBLE PROBLEM
      • CODE
    • PROCEDURE FOR REMOVING ERROR CODE FROM FACEPLATE:
      • FIG. 63
      • TIMER PWA REPLACEMENT
    • MANUAL ADVANCE REGENERATION CHECK
      • CYCLE FLOW RATES (GALLONS PER MIN.)
    • ROTARY VALVE SERVICE
    • TO RELIEVE PRESSURE:
    • DISASSEMBLY
    • SERVICING THE VALVE
    • ASSEMBLY
  • W/VTER FLOW THROUGH THE SOFTENER VALVE
    • SERVICE CYCLE
    • FILL CYCLE
  • SERVICE CYCLE
  • BRINING AND BRINE RINSE CYCLE
    • BRINING AND BRINE RINSE CYCLES
  • W/VTER FLOW THROUGH THE SOFTENER VALVE
  • BACKWASH CYCLE
    • BACKWASH CYCLE
  • FAST RINSE CYCLE
    • FAST RINSE CYCLE
• Get it fixed, at your home or ours!