Document Outline

• Introduction
  • Contents
  • Features
  • Laser Overview {A}
    • 1) Rotating head
      • 2) Aluminum head protection with axes indications
      • 3) Plumb or square beam laser beam aperture
      • 4) Rotating laser beam aperture
      • 5) Index marks for alignment and 90°
      • 6) Motorized wall or floor mount
      • 7) Batteries
      • 8) Jack for battery charger
      • 9) 5/8"-11 Tripod mount for horizontal setup
      • 10) 5/8"-11 Tripod mount for vertical setup
      • 11) Sensors for remote control signal
  • Keypad Overview {B}
    • 1) Automatic / Manual Mode
      • 2) Scan / Rotation Mode
      • 3) On / Off
      • 4) H.I. (Elevation) Alert
      • 5) Motorized Mount On / Off
      • 6) CCW Scan-Stationary Beam / Manual Slope
      • 7) CW Scan-Stationary Beam / Manual Slope
      • 8) Minus – Head Speed / Scan Width / Motorized Mount
      • 9) Plus – Head Speed / Scan Width / Motorized Mount
      • 10) LED’s – X/Y Axis Level Indicators (2) – Green (self- leveling), Red (manual)
      • 11) LED – Motorized Mount Enabled
      • 12) LED – H.I. Alert
      • 13) LED – Low Battery
  • Carrying Case Overview {C}
    • 1) Spare compartment
      • 2) RC350 Remote Control
      • 3) Roteo
      • 4) User Manual
      • 5) Spare Battery Holder
      • 6) RRC350 Receiver-Remote Control (optional)
      • 7) Ceiling Target
      • 8) Spare D-cell Batteries
• Basic Operation
  • How to use your Roteo
  • Button Functions
  • Automatic / Manual modes
  • H.I. Alert mode
  • Rotation mode (Roteo 20HV/35/35G)
  • Scanning mode (Roteo 20HV/35/35G)
  • Wall Mount {D} (Roteo 20HV/35/35G)
    • 1) Attachment clamps for laser and mount
      • 2) Clamp for ceiling grid
      • 3) Adjustable plate
      • 4) 5/8"-11 tripod mount (vertical setup)
      • 5) Moves laser manually on mount
      • 6) Holes for attaching mount to wall
      • 7) Adjustable support for wall or ground stability
      • 8) Screw to adjust support
      • 9) Index notches for alignment
    • Motorized Wall Mount (Roteo 35/35G)
• Set-up and applications
  • Set-up for manual slopes
    • Set-up for full manual mode
    • Set-up for semi-automatic mode
    • Set-up for inclined planes (Roteo 20HV/35/ 35G)
  • Set-up for ceiling work
  • Set-up for layout or floor work (Roteo 20HV/35/35G)
  • Set-up for squaring or establishing 90° angles (Roteo 20HV/35/35G)
• Accessories
  • RC-350 Remote Control
    • 1) CCW Scan-Stationary Beam / Manual Slope
      • 2) CW Scan-Stationary Beam / Manual Slope
      • 3) Scan / Rotation Mode (1.5 seconds - Motorized Mount)
      • 4) Plus – Head Speed / Scan Width / Motorized Mount
      • 5) Minus – Head Speed / Scan Width / Motorized Mount
  • RRC-350 Receiver/Remote Control
    • 1) Audio (Receiver), CW Scan-Stationary Beam / Manual Slope (Remote)
      • 2) Bandwidth (Receiver), CCW Scan-Stationary Beam / Manual Slope (Remote)
      • 3) Power – On (Receiver) / Off (Remote)
      • 4) Scan / Rotation Mode (1.5 seconds - Motorized Mount)
      • 5) Plus – Head Speed / Scan Width / Motorized Mount
      • 6) Minus – Head Speed / Scan Width / Motorized Mount
  • R-250 Receiver
    • 1) Audio
      • 2) Bandwidth
      • 3) Power ON/OFF
  • Other accessories
• Batteries
  • Low battery Indicator
  • Replacing alkaline batteries
  • Using rechargeable NiMH batteries
  • Later recharging
• Check and Adjust
  • Notes and Responsibilities
  • Checking level accuracy
  • Checking vertical accuracy
  • Adjusting level accuracy – The X-axis
  • Adjusting level accuracy – The Y-axis
  • Adjusting vertical accuracy – The Z-axis
  • Check your work
• Troubleshooting
• Care and Transport
  • Transport
  • Storage
  • Cleaning and Drying
• Safety Directions
  • General
  • Intended Use
  • Limits of Use
  • Responsibilities
  • Hazards of Use
  • Laser Classification
    • 1) Laser beam
      • 2) Plumb beam
    • 1) Laser beam
      • 2) Plumb beam
  • Electromagnetic Compatibility (EMC)
  • FCC Statement, Applicable in U.S.
• Technical Data
• International Limited Warranty