Document Outline

• Table of Contents
• Preface
  • 1. General Information contains a general descript...
    • 2. Diagnostic Information contains an error indica...
    • 3. Diagnostic Aids contains tests and checks used ...
    • 4. Repair Information provides instructions for ma...
    • 5. Connector Locations uses illustrations to ident...
    • 6. Preventive Maintenance contains the lubrication...
    • 7. Parts Catalog contains illustrations and part n...
• Safety Information
  • Consignes de Sécurité
  • Norme di sicurezza
  • Sicherheitshinweise
  • Pautas de Seguridad
  • Informações de Segurança
  • Informació de Seguretat
• 1. General Information
  • Power Consumption
  • Operator Panel
  • Maintenance Approach
    • Abbreviations
• 2. Diagnostic Information
  • Start
    • Indicator Light Table
    • Power-On Self Test (POST) Sequence
      • 1. The power light comes on.
        • 2. The carrier moves over the maintenance station ...
        • 3. The paper feed gears turn.
        • 4. All motors stop and the power light stays on.
    • POST Symptom Table
    • Symptom Tables
      • Locate the symptom in the following tables and tak...
      • Carrier Transport Problems
      • Maintenance Station Problems
      • Operator Panel Problems
      • Power Problems
      • Print Quality Problems
  • Service Checks
    • Carrier Transport Service Check
    • Maintenance Station Service Check
      • 1. Cleans the printhead nozzles during the print o...
        • 2. Seals the printhead when it is not being used t...
    • Paper Feed Service Check
    • Paper Path Service Check
    • Power Service Check
    • Print Quality Service Check
• 3. Diagnostic Aids
  • Test Page
    • 1. Turn the printer on
      • 2. Be sure there is paper in the sheet feeder.
      • 3. Press the power and paper feed buttons at the s...
• 4. Repair Information
  • Handling ESD-Sensitive Parts
  • Adjustments
  • Removal Procedures
    • Releasing Plastic Latches
      • 2. Remove the printhead carrier without disconnect...
      • 3. Remove the carrier belt.
      • 4. Depress the latch on the idler pulley, slide it...
      • 2. Remove the carrier frame.
      • 2. Remove the carrier frame.
      • 3. Depress the two clips on the rear of the carrie...
      • 4. Remove the spring and actuator lever from the f...
      • 5. Lift and remove the wiper assembly.
      • 6. Remove the cap assembly.
      • 7. Remove the felt gutter pad.
      • 2. Remove the carrier frame.
      • 2. Remove the carrier frame.
      • 2. Remove the carrier frame.
      • 2. Remove the carrier frame.
      • 3. Disconnect the printhead carrier cables from th...
      • 10. Remove the home sensor screw from the rear of ...
      • 11. Remove the printhead cable retainer clip screw...
      • 12. Depress the two clips on the top of the cradle...
      • 13. Remove the carrier cable and note the routing ...
      • 2. Push the mounting tabs toward the center of the...
      • 2. Remove the carrier frame.
      • 3. Remove the sheet feeder
      • 4. Facing the rear of the machine, remove the smal...
      • 5. Unhook the four small feed roller springs from ...
      • 6. Slide the EOF flag to the right and remove. Not...
• 5. Connector Locations
• 6. Preventive Maintenance
  • Lubrication Specifications
• 7. Parts Catalog
  • 1 -1
  • 17D0561
  • 1
  • Cover, Rear Asm (001)
  • 1
  • 17D0562
  • 1
  • Cover, Rear Asm (002)
  • 2
  • 17D0590
  • 2
  • Screws, (PP)
  • 3
  • 17D0550
  • 1
  • Base Asm (001)
  • 3
  • 17D0551
  • 1
  • Base Asm (002)
  • 4
  • 17D0560
  • 1
  • Buttons and Lens Asm (Operator Panel)
  • 5
  • 17D0554
  • 1
  • Cover, Access (001)
  • 5
  • 17D0555
  • 1
  • Cover, Access (002)
  • 6
  • 17D0552
  • 1
  • Cover, Front (001)
  • 6
  • 17D0553
  • 1
  • Cover, Front (002)
  • 7
  • 17D0557
  • 1
  • Tray, Exit Asm (001)
  • 7
  • 17D0558
  • 1
  • Tray, Exit Asm (002)
  • 8
  • 17D0590
  • 4
  • Feet, Machine (PP)
  • NS
  • 7350160
  • 1
  • Package, Plain B/M Includes: Carton, Cushion Set, ...
  • 2 -1
  • 17D0566
  • 1
  • Roller, Small Feed Asm
  • 2
  • 17D0589
  • 1
  • Lever, EOF Asm
  • 3
  • 17D0565
  • 1
  • Roller, Large Feed with Gear Asm
  • 4
  • 17D0564
  • 1
  • Roller, Star Asm / Mid Frame with Brackets
  • 5
  • 17D0569
  • 1
  • Roller, Exit Asm with Gear
  • 6
  • 17D0568
  • 1
  • Plate, Gear Asm without Motor
  • 7
  • 17D0567
  • 1
  • Motor, Paper Feed Asm with Gear
  • 8
  • 17D0584
  • 1
  • Sheet Feeder Asm (001)
  • 8
  • 17D0585
  • 1
  • Sheet Feeder Asm (002)
  • 3 -1
  • 17D0570
  • 1
  • System Board
  • 2
  • 17D0590
  • 4
  • Screws, (PP)
  • 3
  • 17D0559
  • 1
  • Operator Panel / Power Connector
  • NS
  • 17D0575
  • 1
  • Power Supply, External (LV) 100 Japan
  • NS
  • 17D0576
  • 1
  • Power Supply, External (LV) 120
  • NS
  • 17D0577
  • 1
  • Power Supply, External (HV) 220
  • 4 -1
  • 17D0578
  • 1
  • Carrier Assembly (Complete)
  • 2
  • 17D0580
  • 1
  • Rod, Carrier Guide
  • 3
  • 17D0579
  • 1
  • Printhead Rubber Backers
  • 4
  • 17D0581
  • 1
  • Cartridge Interlock Keys
  • 5
  • 17D0572
  • 1
  • Printhead / Home Sensor Cable
  • 5 -1
  • 17D0590
  • 11
  • Screws, (PP)
  • 2
  • 17D0582
  • 1
  • Motor, Carrier Transport with Gear
  • 3
  • 17D0590
  • 2
  • Retainers, Carrier Guide Rod (PP)
  • 4
  • 17D0583
  • 1
  • Belt, Carrier
  • 5
  • 17D0580
  • 1
  • Rod, Carrier Guide
  • 6
  • 17D0588
  • 1
  • Pulley, Idler Asm
  • 7
  • 17D0563
  • 1
  • Frame, Carrier
  • 8
  • 17D0564
  • 1
  • Roller, Star Asm / Mid Frame with Brackets
  • 7 -1
  • 17D0586
  • 1
  • Maintenance Station
  • 2
  • 17D0587
  • 1
  • Wipers and Caps
  • 3
  • 17D0556
  • 1
  • Gutter Pad
• Index
  • A
  • C
  • D
  • E
  • G
  • I
  • L
  • M
  • P
  • R
  • S
  • T