Document Outline

• Quick Operation Summary
• To make it easier for you to learn how to use your two-way radio, we’ve included this quick refer...
  • Menu Button
• Function Press Menu To Change Use Press To Set
• Channel Selection Once Scroll Buttons Push-To-Talk
• Code Selection 2 times Scroll Buttons Push-To-Talk
• Scan List 3 times Scan Button Push-To-Talk
• Call Tone Alert 4 times Scroll Buttons Push-To-Talk
• VOX Sensitivity 5 times Scroll Buttons Push-To-Talk
• Auto Power Off 6 times Scroll Buttons Push-To-Talk
• Replacing Alkaline Batteries:
  • 1. Insert 3 AA batteries into alkaline tray. Make sure you align plus and minus signs on batterie...
  • 2. Replace radio back by sliding up and onto radio body.
  • 3. Push up until secure.
• The NiMH battery kit, alkaline battery kit, and spare NiMH battery are available as accessories (...
• For information, call 1-800-353-2729.
  • Table of Contents
  • Your New Radio
• Motorola Talkabout radios operate on Family Radio Service (FRS) designated frequencies. This lice...
• Contact the FCC for more information at:
• 1-888-CALL-FCC (1-888-225-5322)
• Or:
• http://www.fcc.gov
  • NiMH Chargers
• Your radio will use one of the following types of chargers. Follow the instructions below for the...
• To get maximum use from the battery, charge it for at least five hours before you use it for the ...
  • Tri-Color LED Charger
• Charging the NiMH Battery:
  • 1. Turn the radio off.
  • 2. Plug charger into an AC wall outlet. Figure 2.
  • 3. Lift charging connector cover on radio (not detachable) and plug charger connector into jack. ...
  • 4. LED Indicator on Battery Charger will flash. (See chart below for complete charging status).
• Tri-Color LED Charger Charging Status Chart
• LED Color Charging Status Completion
• Solid Red Rapid Up to 90%
• Flashing Green Top-off 90% to 100%
• Solid Green Complete 100%
• Flashing Red Battery Fault ______
• Flashing Yellow* Standby ______
• *Battery is not receiving correct voltage. Battery charging temperature must remain between 00 to...
• 1
• Your New Radio
• Radio Diagram 2-3
• Batteries
• Rechargeable NiMH Battery 4
• Using Rechargeable NiMH Battery 4
• NiMH Chargers
• Tri-Color LED Charger 6
• Charging the NiMH Battery 6
• Charging Status Chart 6
• Single Color LED Charger 7
• Charging the NiMH Battery 7
• AA Alkaline Batteries
• Installing Alkaline Battery Tray 8
• Replacing Alkaline Batteries 9
• Battery Meter 10
• Low Battery Alert 10
• Belt Holster
• Using Radio With Holster 11
• Before You Can Talk
• Power Button 12
• Setting the Channel 12
• Setting the Code 13
• Custom Codes-T289 Only 13
• To Communicate
• Monitor Button 14
• Channel Busy Indicator-T289 14 Volume Control 14
• Push-To-Talk Button 15
• Alert Tones 15
• Features
• Auto Power Off 16
• Display Light 16
• Keypad Lock 17
• Reset 17
• Time-out Timer 17
• Channel Scan 18
• Scan List 19
• Call Tone 19
• Hands Free Use
• Using VOX Feature 20
• Enabling iVOX-T289 Only 20
• Setting VOX/iVOX Sensitivity 21
• Improving Communication
• Talk Range 22
• Care and Safety 22
• Accessories 23
• Troubleshooting 24-25
• Safety Information 26-27
• Charging Safety Instructions 28-29
• Channel Chart 30
• Code Chart 31
• Warranty 32-33
• Copyrights 34-35
• Quick Operation Summary
• Menu Button 36
• Call Tone 37
• Light/lock Button 37
• Monitor Button 37
• Scan Button 37
  • AA Alkaline Batteries
• To operate Talkabout radios with alkaline batteries you’ll need to install the alkaline battery t...
• Installing Alkaline Battery Tray:
  • 1. Grasp radio firmly at top and slide radio back down to remove. Make sure you are not holding b...
  • 2. Insert 3 AA batteries into alkaline tray. Make sure you align plus and minus signs on batterie...
  • 3. Align tabs at top of battery tray with slots on radio before pressing tray into place. Figure 5.
  • 4. Replace radio back by sliding up and onto radio body.
  • 5. Push up until secure.
• LED Indicator Light
• Indicates radio is on; will be steady
• red when transmitting.
• Battery Meter Indicator
• Indicates how much battery charge is left.
• Power Button
• Turn radio on or off.
• Accessory Connector
• Used for plugging in optional audio
• accessories.
• Scan Button
• Scans frequencies for activity.
• Call Button
• Calls other radio users.
• Light/Lock Button
• Illuminates display for 5 seconds.
• Locks radio to prevent accidental
• change of settings.
• Microphone
• Picks up audible transmissions.
• Scroll Buttons
• Changes volume and radio settings.
• Monitor Button
• Monitors frequency activity.
• Push-To-Talk (PTT) Button
• Used to transmit messages.
• Menu Button
• Changes function mode.
• Charging Connector*
• Used for charging battery.
• *NiMH Battery Use Only
• 2
• 3
• Figure 1.
• Figure 3.
• Figure 3.
  • Single Color LED Charger
• Charging the NiMH Battery:
  • 1. Turn the radio off.
  • 2. Plug charger into an AC wall outlet. Figure 4.
  • 3. Lift charging connector cover on radio (not detachable) and plug charger connector into jack. ...
  • 4. The red LED on charger will flash while battery charges. LED will glow continuously when batte...
• Notes:
• • The NiMH battery may be charged outside the radio by plugging the adapter directly into the bat...
• • For optimum battery life, battery should not be left charging for extended periods.
• • Turn radio off when charging. If radio is on while charging, additional time is required to cha...
• Figure 2.
• Figure 4.
  • Batteries
• Your Talkabout radio operates with either a Nickel-Metal Hydride (NiMH) rechargeable battery or 3...
• The NiMH rechargeable battery will provide approximately 11 hours of operation with normal use. N...
  • Rechargeable NiMH Battery
• Using Rechargeable NiMH Battery:
  • 1. Grasp radio firmly at top and slide radio back down to remove. Make sure you are not holding b...
  • 2. Place the NiMH battery inside the radio with battery contacts facing down. Figure 6.
  • 3. Replace the radio’s back by sliding up and onto radio body.
  • 4. Push up until secure.
• Stop Sign: The NiMH battery has a stop sign symbol to remind you to turn the battery over and ali...
• 7
  • Belt Holster
• Talkabout radios come with a belt holster which can be used with both the NiMH and AA battery doors.
• Using Radio With Holster:
  • 1. Position the base of the radio in bottom portion of holster.
  • 2. Push the radio towards the holster until it latches into place. Figure 8.
  • 3. To remove radio from holster, pull the top tab on holster away from radio. Figure 9.
• Note: You may find it easier to clip the holster onto your belt before you insert radio into the ...
  • Light/Lock Button
• Function Press Light/Lock Function Press Light/Lock
• Turn On Light Press Once Turn Off Light Time Out, 5 seconds
• Lock Keypad Press and Hold Unlock Keypad Press and Hold
• Figure 6.
• 8
• 9
• Figure 5.
• Figure 5.
• Note: When batteries are low, as indicated by battery meter or low battery alert, replace the alk...
• 33
• Figure 8.
• Figure 9.
• Figure 7.
• 10
• 11
• Figure 10.
• 34
• 35
  • Keypad Lock
• Lock allows you to disable the Scroll, Menu, and Scan buttons so that the radio settings cannot b...
• Activating Lock Feature:
• Press and hold the Light/Lock button until LOCK appears on the display.
• Disabling Lock Feature:
• Press and hold Light/Lock button until LOCK disappears.
• Note: Radio emits audible tone to confirm lock and unlock feature activation. Disabled buttons wi...
  • Reset
• The Reset feature returns all user programmable features back to the original factory settings.
  • 1. Hold down both the Monitor and Push-To-Talk buttons.
  • 2. Turn the radio on.
  • Time-out Timer
• The Time-out Timer feature helps extend battery life and prevents you from accidently tying up fr...
  • Monitor Button
• Function Press Monitor
• Check Channel Activity Once
• , Motorola and Talkabout are registered trademarks of Motorola, Inc.
• 38
  • Before You Can Talk
• Read this manual carefully. Make sure you know how to properly operate the radio before use. Talk...
  • Power Button
• Turning the Radio On:
  • 1. Press orange Power button, radio beeps and LED Indicator Light flashes every 3 seconds to indi...
  • 2. To turn radio off, press Power button until display clears. Radio beeps to confirm.
• Note: When you turn the radio on you are in
• normal operating mode.
  • Channels
• You can only communicate with radios that are set on the same channel and code. The chart on page...
  • Setting the Channel
• Changing the Channel:
  • 1. With radio on, press Menu button once. CHAN appears and current channel (large number) will fl...
  • 2. Use the Scroll buttons to select a new channel.
  • 3. Press Push-To-Talk button to set new channel selection.
• Note: The radio will return to normal operation mode in 10 seconds or after pressing Push-To-Talk...
  • Interference Eliminator Codes
  • Codes filter out static, noise and unwanted messages on radio channels. You can only communicate ...
  • Setting the Code
• Changing the Code
  • 1. With radio on, press Menu button twice. The current Code (small number) will flash. Figure 13.
  • 2. Use Scroll buttons to select a new code.
  • 3. Press Push-To-Talk button to set new code selection.
• Notes:
• • The channel and code may be set sequentially. Just hit the Menu button after setting a new chan...
• • The radio will return to normal operation mode in 10 seconds or after pressing Push-To-Talk but...
• Custom Codes - T289 Only
• The T289 has the ability to save a specific code for each channel. This allows you to change chan...
• See Pages 34-35 for quick operation summary.
  • 1 YEAR LIMITED WARRANTY
• Motorola, Inc. warrants the enclosed product against defects in material and workmanship under no...
• MOTOROLA IS NOT LIABLE FOR DAMAGES IN EXCESS OF THE PURCHASE PRICE OF THE PRODUCT, FOR ANY INCIDE...
• For warranty information and service call 1-800-353-2729.
• Copyright Information: The Motorola products described in this manual may include copyrighted Mot...
• 32
  • Call Tone Button
• Function Press Call
• Call Tone Alert Once
  • Scan Button
• Function Press Scan Function Press Scan
• Turn On Scan Once Turn Off Scan Once
• Kit Number Description
• Figure 11.
  • Push-To-Talk Button
• Sending Messages:
  • 1. Check channel activity by pressing Monitor button or view Channel BusyIndicator (T289).
  • 2. Press Push-To-Talk button and speak into radio. Figure 15.
  • 3. LED Indicator Light glows continuously while transmitting.
• Receiving Messages:
• Release the Push-To-Talk button.
• Note: To maximize clarity, hold radio 2 to 3 inches from mouth.
  • Alert Tones
• The Alert Tones (beeps) on the Talkabout radios are set at a fixed volume level and cannot be low...
• Disabling Alert Tones:
  • 1. Hold down the Monitor button while you turn radio on.
  • 2. To re-activate Alert Tones, turn the radio off, then on again while holding the Monitor button...
  • To Communicate
  • Monitor Button
• The Monitor button is used to check activity on current channel before transmitting.Check channel...
• Channel Busy Indicator - T289 Only
• The T289 radio has a Channel Busy Indicator to indicate that your current channel is in use. If a...
• To avoid interrupted conversation, wait until the channel frequency is clear or switch to another...
  • Volume Control
• Adjusting the Volume:
  • 1. Turn radio on by pressing the orange Power button.
  • 2. Use Scroll buttons to adjust the radio’s volume. Figure 14.
  • 3. VOL indicator will appear and display will show current volume level (1 to 19). Beeps confirm ...
  • 4. The radio will return to normal operation mode after 2 seconds.
• Note: You may adjust volume by using the Scroll buttons as long as the radio is not in Menu or Lo...
• See Pages 12-13 for quick operation summary.
• Figure 12.
• 12
• 13
• Figure 13.
  • Features
  • Auto Power Off
• Your Talkabout can be programmed to turn itself off after a certain period of inactivity. This fe...
• Enabling Auto Power Off:
  • 1. Press Menu button six times to enter Power Off feature.
  • 2. Use the Scroll buttons to set the number of hours, after which, the power shuts down (1-8 hours).
• Notes:
• • The radio will return to normal operation mode after 10 seconds or after you press the Push-To-...
• • Minus sign appears on display if Auto Power Off is disabled.
  • Display Light
• Talkabout radios have a backlit display for use in low-light conditions. Press Light/Lock button ...
• Note: Pressing other buttons will extend the time the light stays on.
• Figure 14.
• 15
• 14
• Figure 15.
  • Scan List
• Talkabout TA280 and T289 radios allow you to select which channels are to be scanned by turning t...
• Setting the Scan List Menu:
  • 1. Press Menu button three times to enter the Scan List menu. SCAN appears and channel number fla...
  • 2. Use Scroll buttons to change channel.
  • 3. Press Scan button to add (On) or delete (OF) channels.
• Note: Channels which are turned OF (Off) will not be scanned.
  • Call Tone
• Talkabout radios have multiple unique Call Tones to identify sender and alert receiver. The TA280...
• Changing and Hearing Call Tones:
  • 1. With radio on, press Menu button four times to enter Call Tone menu. CALL appears and Call Ton...
  • 2. Use Scroll buttons to change and hear the Call Tones.
• Notes:
• • When Alert Tones are disabled you will not hear Call Tone beeps when transmitting, but you will...
• • The radio will return to normal operation mode in 10 seconds or after pressing Push-To-Talk but...
• Figure 16.
• 16
• 17
  • Hands Free Use
• Talkabout radios have built-in Voice Operated Transmission (VOX) capability. This means the sound...
• The T289 also has iVOX (Internal Voice Operated Transmission), which allows you to use the radio ...
  • Using VOX Feature
• Enabling VOX:
  • 1. With radio off, plug accessory connector into jack on left side of radio. Figure 19.
  • 2. Turn radio on.
  • 3. Lower volume with Scroll button before placing accessory on head or in ear. VOX appears on dis...
  • 4. To transmit, speak into accessory microphone. To receive, stop talking.
• Enabling iVOX - T289 only
  • 1. Turn the radio on with the Push-To-Talk depressed to arm the iVOX feature.
  • 2. To activate, quickly press the Push-To-Talk button. The VOX indicator will appear on the displ...
  • 3. To transmit, speak into radio microphone. To receive, stop talking.
• Note: There will be a brief delay between when you start/stop talking and radio transmission time...
• Figure 17.
• 18
• 19
• Figure 18.
  • Accessories
• With the audio and carrying accessories (sold separately) available for Talkabout radios, you’ll ...
• We’ve also got a selection of cases perfect for all your radio transport needs. Whether it’s an A...
  • 1-800-353-2729
• Note: When using audio accessories, the radio’s volume should be kept at a comfortable listening ...
  • Improving Communication
  • Talk Range
• Talkabout radios have been designed to maximize performance and improve transmission range in the...
• Talk range depends on the terrain. These are line of sight radios and talk range will be affected...
  • Care and Safety
• To clean the radio, wipe with a soft cloth dampened with water. Don’t use cleaners or solvents on...
• If the radio gets wet, turn it off and remove batteries immediately. Dry battery compartment with...
• Figure 19.
• 20
• 21
• Figure 20.
  • Charging Safety Instructions
• SAVE THESE INSTRUCTIONS
• Before using the battery charger, read all instructions and cautionary markings on,
• (1) the battery,
• (2) battery charger, and
• (3) the radio using the battery.
• Optimal Range
• Talk range in flat, open areas, up to 2 miles.
• Medium Range
• Range is decreased when buildings and trees are in the way.
• Minimal Range
• Dense foliage or mountains can limit range.
• 22
• 23
  • Troubleshooting
• 24
• No Power
• Message Not Transmitted
• Message Not Received
• Hearing Other Noise Or Conversation on a Channel
• Limited Talk Range
• Reposition or replace alkaline batteries.
• Recharge or replace NiMH battery.
• Make sure the Push-To-Talk button is completely pressed as you transmit.
• Reposition, replace or charge batteries.
• Confirm radios have the same Channel and Interference Eliminator Code settings.
• Make sure Push-To-Talk is not inadvertently being pressed.
• Reposition, replace or charge batteries.
• Obstructions, operating indoors or in vehicles may interfere with communication. Change your loca...
• Check to make sure volume is turned up.
• Confirm Interference Eliminator Code is set, (active settings are 1-38).
• Shared Channel or Interference Eliminator Code may be in use, try another.
• Steel/concrete structures, heavy foliage and use in buildings and in vehicles will decrease range...
• Wearing radio close to body such as in a pocket or on a belt will decrease range, change location...
• Heavy Static or Interference
• Channel/Code Locked
• Low Batteries
• Charger LED Double Flashing
• Can not Activate iVOX (T289 only)
• Radios too close. Radios must be at least 5 feet apart.
• Radios too far apart. Obstacles interfere with transmission. Talk range is up to 2 miles in clear...
• Make sure radio is unlocked. See page 17 for more information.
• Recharge NiMH battery or replace alkaline batteries. Extreme operating temperatures will affect t...
• Charger pin is not properly in place. Check to make sure the charger pin is fully inserted into t...
• Battery power is very low; double flashing indicates that the battery is charging up slowly befor...
• Feature not armed. Follow instructions on page 20 to arm and activate iVOX.
• If the radio still doesn’t work properly, contact your place of purchase or call Motorola Product...
  • 1-800-353-2729
• Motorola Product Services
• 25
  • 1. Do not expose the charger to rain or snow.
  • 2. Do not operate the charger if it has received a sharp blow, or has been dropped or damaged in ...
  • 3. Do not disassemble the charger. If it does not work properly return it to the point of purchas...
  • 4. Never alter the AC cord or plug provided with the unit. If plug will not fit the outlet, have ...
  • 5. To reduce risk of damage to cord or plug, pull by the plug rather than the
  • 6. cord when disconnecting charger from AC receptacle.
  • 7. To reduce the risk of electric shock, unplug the charger from the outlet before attempting any...
  • 8. Use of an attachment not recommended or sold by Motorola may result in a risk of fire, electri...
  • 9. Make sure that the cord is located so that it will not be stepped on, tripped over, or subject...
  • 10. An extension cord should not be used unless absolutely necessary. Use of an improper extensio...
• • That the pins on the plug of the extension cord are the same
• • Number, size, and shape as those on the plug of the charger.
• • That the extension cord is properly wired and in good electrical condition, and
• • That the cord size is 18 AWG for lengths up to 100 feet, and 16 AWG for lengths up to 150 feet.
  • 11. The supply cord of this charger cannot be replaced. If the cord is damaged, the charger shoul...
  • Damaged Antennas
• Do not use the radio with a damaged antenna. If a damaged antenna comes in contact with the skin,...
  • Batteries
• All batteries can cause property damage and/or bodily, injury or burns if a conductive material s...
  • For Vehicles With an Air Bag
• Do not place a portable radio in the area over an air bag or in the air bag deployment area. Air ...
  • Potentially Explosive Atmospheres
• Turn your radio OFF when in any area with a potentially explosive atmosphere, unless it is a type...
  • Batteries
• Do not replace or charge batteries in a potentially explosive atmosphere. Contact sparking may oc...
• To avoid possible interference with blasting operations, turn your radio OFF near electrical blas...
• Note: Areas with potentially explosive atmospheres are often, but not always, clearly marked. The...
• 26
• 27
• FCC License Not Required: FCC Information: Changes or modifications not expressly approved by Mot...
• 28
• 29
• To reduce the risk of injury, charge only the rechargeable batteries listed. Other types of batte...
• 36
• See Pages 36-37 for quick operation summary.
• NTN8871 110V - NiMH Charging Adapter
• NTN9150 110V - NiMH Charging Adapter
• Kit Number Capacity in milliampere-hour mAH/
• Description/Composition
• 37
  • Battery Meter
• The Battery Meter, located on the front display, is divided into three bars. As power is used, th...
• Note: To ensure proper functioning of the battery meter use only the Motorola NiMH rechargeable b...
  • Low Battery Alert
• When the battery is low, the radio will beep:
• • 3 to 4 seconds after turning power on
• • every 10 minutes in standby mode
• • after releasing Push-To-Talk button
• • after releasing the Call button
• Note: Remove batteries before storing your radio for extended periods. Batteries may corrode over...
• HNN 9720 750 mAH/T289, TA270/280 SLK/NiMH
  • Features
  • Channel Scan
• Scan allows you to monitor channels and codes of other transmitting radios. When the radio detect...
• Activating Scan Feature:
  • 1. With the radio on, press the Scan button. SCAN appears on the display, flashing.
  • 2. When the radio detects channel activity, SCAN stops flashing and the active channel and code a...
  • 3. To turn off the Scan feature and return to normal operation mode press the Scan button.
• Pausing on a Channel:
  • 1. Press Monitor button to lock or hold your radio to displayed channel and code. CHAN SCAN appea...
  • 2. To begin scanning again, press the Monitor button.
• Notes:
• • If Monitor button is not pressed, radio will begin scanning for active channels 5 seconds after...
• • Radios will scan all Codes (38) on all selected channels.
• Resetting To Push-To-Talk Mode:
  • 1. Press Push-To-Talk button once. The VOX display will disappear.
  • 2. To transmit, press Push-To-Talk button on radio. To receive, release the Push-To-Talk.
• Notes:
• • To return to iVOX mode follow instructions above.
• • To return to VOX mode, turn the radio off, then on again with the accessory in place.
  • Setting VOX/iVOX Sensitivity
• Talkabout radios allow you to adjust VOX sensitivity of radio to compensate for varying levels of...
  • 1. With radio on, press Menu button five times to enter VOX sensitivity mode.
  • 2. VOX will appear on display along with the current VOX setting. Figure 20.
  • 3. Use Scroll buttons to select level.
• Three Sensitivity Levels:
• 1 = Low sensitivity for high levels of background noise.
• 2 = Medium sensitivity for use in most applications.
• 3 = High sensitivity for low levels of background noise.
• Notes:
• • The radio will return to operation mode after 10 seconds or after you press the Push-To-Talk bu...
• • When using audio accessories, radio volume should be kept at a comfortable listening level. Bef...
• • When using iVOX, sensitivity level 3 is recommended.
  • Safety Information
• Exposure To Radio Frequency Energy
• The design of your Motorola two-way radio, which generates radio frequency (RF) electromagnetic e...
• • FCC Report and Order FCC 96-326 (August, 1996)
• • American National Standards Institute (C95-1 - 1992)
• • National Council on Radiation Protection and Measurements (NCRP - 1986)
• • International Commission on Non-Ionizing Radiation Protection (ICNRP - 1986)
• • European Committee for Electrotechnical Standardization (CENELEC)
• - Env. 50166 - 1 1995E - Human Exposure to Electromagnetic Fields Low Frequency (0 Hz to 10 kHz)
• - Env. 50166 - 2 1995E - Human Exposure to Electromagnetic Fields High Frequency
• (10 kHz to 300 kHz)
• - Proceeding of SC211/8 1996 - Safety Considerations for Human Exposure to E.M.F’s from Mobile Te...
• To assure optimal radio performance and to ensure that exposure to RF energy is within the guidel...
• • When transmitting with a two-way portable radio, hold radio in a vertical position with its mic...
• • Keep antenna at least 1 inch (2.5 cm) from your head and body.
• • If you wear a portable radio on your body, ensure that the antenna is at least one inch (2.5 cm...
• Electromagnetic Interference Compatibility
• Nearly every electronic device is susceptible to electromagnetic interference (EMI) if inadequate...
• • Turn your radio OFF in any facilities where posted notices instruct you to do so. Hospitals or ...
• • Turn your radio off when on board aircraft when instructed to do so. Any use of the radio must ...
• Single-Unit Charger
• See Pages 36-37 for quick operation summary.
• Batteries
• 39
• See Pages 36-37 for quick operation summary.
• 6
• Notes:
  • Computer Software Copyrights
• The Motorola equipment described in this manual may include copyrighted Motorola computer program...
• computer programs contained in the Motorola equipment described in this manual may not be copied ...
• 30
• Notes:
• Interference Eliminator Code Chart
  • Talkabout Code
  • Hz Freq
  • 7/7x Code
  • Talkabout Code
  • Hz Freq
  • 7/7x Code
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 67.0
  • 71.9
  • 74.4
  • 77.0
  • 79.7
  • 82.5
  • 85.4
  • 88.5
  • 91.5
  • 94.8
  • 97.4
  • 100.0
  • 103.5
  • 107.2
  • 110.9
  • 114.8
  • 118.8
  • 123.0
  • 127.3
  • A
  • B
  • C
  • D
  • E
  • F
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 131.8
  • 136.5
  • 141.3
  • 146.2
  • 151.4
  • 156.7
  • 162.2
  • 167.9
  • 173.8
  • 179.9
  • 186.2
  • 192.8
  • 203.5
  • 210.7
  • 218.1
  • 225.7
  • 233.6
  • 241.8
  • 250.3
  • G
• Note: Carrier Squelch (0) disables Interference Eliminator Codes. This allows you to monitor all ...
• For Talkabout compatibility information with other Motorola two-way radios, please call 1-800-353...
• 31
• 5896277
• 5894592
• 5894292
• 5893027
• 5864752
• 5789098
• 5699006
• 5734975
• 5742484
• 5861850
• D408396
• D395882
• D399821
• D383745
• D387758
• D389827
• D389158
• D389139
• Channel Frequency Chart
  • Channel MHz
  • 1 462.5625
  • 2 462.5875
  • 3 462.6125
  • 4 462.6375
  • 5 462.6625
  • 6 462.6875
  • 7 462.7125
  • Channel MHz
  • 8 467.5625
  • 9 467.5875
  • 10 467.6125
  • 11 467.6375
  • 12 467.6625
  • 13 467.6875
  • 14 467.7125
    • Patent Notice
• This product is covered by one or more of the following United
• States Patents:
  • Channel Frequency and Interference Eliminator Code Charts
• The channel/frequency and Interference Eliminator Code charts on these pages provide frequency an...
• 40
• Figure 6.
• 4
• 5
• The NiMH battery kit, alkaline battery kit, and spare NiMH battery are available as accessories (...
• For information, call 1-800-353-2729.
• Figure 7.