Document Outline

• Contents
• 1. Get Started with the Main UI
  • Supported switches
  • Available publications and online help
  • Register your product
  • Main local browser UI overview
  • Log in to the main UI with a web browser
    • Log in to the main UI using the switch default IP address
    • Log in to the main UI with a known IP address
    • Main UI buttons and user-defined fields
    • Interface naming conventions
    • Save your settings to the running configuration
    • Main UI online help
  • Use the Device View in the Main UI
  • Set up SNMP access
• 2. Configure Switch System Information
  • Switch system information
    • View and configure switch system information
    • View the fan status
    • View the temperature sensor information
    • View the device status and firmware version
    • View the system CPU status
    • Configure the CPU thresholds
    • View or clear switch statistics
    • View USB device information
  • Loopback interface
  • IPv4 management interfaces and VLANs
    • Configure the IPv4 service port
    • Configure an IPv4 management VLAN
    • Configure an IPv4 management interface
  • IPv6 management interfaces and VLANs
    • Configure an IPv6 service port
    • Manage IPv6 addresses for the IPv6 service port
    • Configure an IPv6 management VLAN
    • Manage IPv6 addresses for the IPv6 management VLAN
    • Manage the IPv6 default route addresses for the IPv6 management VLAN
    • Configure an IPv6 management interface
    • Manage IPv6 addresses for the IPv6 management interface
    • Manage the IPv6 default route addresses for the IPv6 management interface
  • Time and SNTP settings
    • Configure the time setting manually
    • Configure the time settings with SNTP and configure the global SNTP settings
    • View the SNTP global status
    • Configure SNTP servers
      • Add an SNTP server
      • Change the settings for an existing SNTP server
      • Remove an SNTP server
    • Configure daylight saving time settings
    • View the daylight saving time status
  • Precision Time Protocol
    • Manage the global PTP settings
    • Manage the PTP interface settings
  • Domain Name System
    • Configure the global DNS settings and add a DNS server
    • Remove a DNS server
    • Configure and view host name-to-IP address information
      • Add a static entry to the dynamic host mapping table
      • Remove an entry from the dynamic host mapping table
      • Change the host name or IP address in an entry of the dynamic host mapping table, view all entries, or clear all entries
  • Switch database management template
  • Green Ethernet settings
    • Configure the global green Ethernet settings
    • Configure green Ethernet interface settings
    • Configure and display detailed green Ethernet settings for an interface
    • Display green Ethernet information for the link partner of an interface
    • Display the green Ethernet statistics summary
    • Configure and display the green Ethernet EEE LPI history for an interface
  • Bonjour settings
    • Enable or disable Bonjour
    • Display Bonjour information
  • IPv4 DHCP server
    • Configure a DHCP server
    • Manage DHCP pools
      • Create a DHCP pool
      • Change a DHCP pool
      • Remove a DHCP pool
    • Configure DHCP pool options
    • Display DHCP server statistics
    • Display the DHCP bindings
    • Delete one or all dynamic DHCP bindings
    • View bindings with DHCP conflicts
    • Delete one or all DHCP bindings with conflicts
  • DHCP relay and relay statistics
  • DHCP Layer 2 relay
    • Configure the global DHCP L2 relay settings
    • Configure a DHCP L2 relay interface
    • Display DHCP L2 relay interface statistics
  • UDP relay
    • Configure the global UDP relay settings and add a UDP switch configuration
    • Change a UDP switch configuration
    • Remove a UDP switch configuration
    • Add a UDP interface configuration
    • Change a UDP interface configuration
    • Remove a UDP switch configuration
  • DHCPv6 server
    • Enable the DHCPv6 server
    • Manage DHCPv6 pools
      • Create a DHCPv6 pool
      • Change a DHCPv6 pool
      • Delete a DHCPv6 pool
    • Manage DHCPv6 prefix delegation for pools
      • Create a DHCPv6 prefix delegation configuration for a pool
      • Change a DHCPv6 prefix delegation configuration for a pool
      • Delete a DHCPv6 prefix delegation configuration for a pool
    • Configure the DHCPv6 settings for an interface
    • Display the DHCPv6 bindings
    • Display DHCPv6 server statistics
    • Delete DHCPv6 statistics for one or all interfaces
  • DHCPv6 relay interface
  • Power over Ethernet
    • PoE concepts
    • Configure the global PoE settings
    • Configure the PoE ports settings
    • Power-cycle one or more PoE ports
  • Timer schedules
    • Create a timer schedule
    • Specify the settings for an absolute timer schedule
    • Specify the settings for a recurring timer schedule
    • Change the settings for a recurring timer schedule entry
    • Delete a timer schedule entry
    • Delete a timer schedule
  • Simple Network Management Protocol
    • Manage SNMPv1 and SNMPv2 communities
      • Add an SNMPv1 and SNMPv2 community
      • Change an existing SNMPv1 and SNMPv2 community
      • Delete an SNMPv1 and SNMPv2 community
    • Manage the SNMPv1 and SNMPv2 trap settings
      • Add an SNMPv1 or SNMPv2 trap configuration for a host
      • Change an SNMPv1 or SNMPv2 trap configuration for a host
      • Delete an SNMPv1 or SNMPv2 trap configuration for a host
    • Configure SNMPv1 and SNMPv2 trap flags
    • Display the supported MIBs
    • Manage SNMPv3 users
      • Add an SNMPv3 user account
      • Change an SNMPv3 user account
      • Delete an SNMPv3 user account
  • Link Layer Discovery Protocol
    • Configure the global LLDP settings
    • Configure LLDP interface settings
    • Display or clear LLDP statistics
    • Display LLDP local device information
    • Display LLDP remote device information
    • Display the LLDP remote device inventory
  • Link Layer Discovery Protocol for Media Endpoint Devices
    • Configure the global LLDP-MED settings
    • Configure LLDP-MED interface settings
    • Display LLDP-MED local device information
    • Display the LLDP-MED remote device information
    • Display the LLDP-MED remote device inventory
  • Link dependency
    • Configure a link dependency group
    • Configure or display upstream and downstream interfaces for a link dependency group
    • Clear all interfaces in a link dependency group
  • Industry Standard Discovery Protocol
    • Configure the global ISDP settings
    • Configure ISDP settings for an interface
    • Display or clear ISDP neighbor information
    • Display or clear ISDP statistics
• 3. Configure Switching Information
  • VLANs
    • Manage the VLAN configuration on the switch
      • Add a VLAN
      • Change a VLAN
      • Delete one or more VLANs
      • Reset the entire VLAN configuration to default setting
      • Change the internal VLAN allocation settings
    • Auto-Trunk overview
    • Enable or disable Auto-Trunks
    • Configure the switch port mode settings for interfaces
    • Configure membership interfaces for a VLAN
    • View the VLAN status on the switch
    • Change the port VLAN ID settings
    • Configure a MAC-based VLAN
      • Add a MAC-based VLAN configuration
      • Delete a MAC-based VLAN configuration
    • Configure a protocol-based VLAN group
      • Add a protocol-based VLAN group
      • Change a protocol-based VLAN group
      • Delete a protocol-based VLAN group
    • Configure membership interfaces for a protocol-based VLAN group
    • Configure an IP subnet-based VLAN
      • Add an IP subnet-based VLAN
      • Delete an IP subnet-based VLAN
    • Configure a double VLAN
    • Configure a voice VLAN
    • Configure Generic Attribute Registration Protocol
      • Configure GARP switch settings
      • Configure GARP settings for one or more interfaces
  • Auto-VoIP
    • Configure Auto-VoIP protocol-based settings
    • Configure the Auto-VoIP OUI-based properties
    • Configure the OUI-based interface settings
    • Manage the OUI table
      • Add an OUI prefix
      • Delete one or more OUI prefixes
    • Display the Auto-VoIP status
  • Spanning Tree Protocol
    • Configure the STP settings and display the STP status
    • Configure the CST settings and display the CST status
    • Configure the CST interface settings
    • Display the CST interface status
    • Manage MST instances
      • Add an MST instance and display the MST status
      • Change an MST instance
      • Delete an MST instance
    • Configure and display the interface settings for an MST instance
    • Display the STP interface statistics
    • Configure the PVST/RPVST VLAN settings
    • Change a PVST/RPVST VLAN configuration
    • Remove a PVST/RPVST VLAN configuration
    • Configure the PVST and RPVST interface settings
    • Display the PVST and RPVST statistics
  • Multicast forwarding database
    • Display the entries in the multicast forwarding database
    • Remove the IGMP snooping entries from the multicast forwarding database
    • Remove all known multicast MAC entries from the multicast forwarding database
    • Display the multicast forwarding database statistics
  • Internet Group Management Protocol snooping
    • Configure IGMP snooping automatically with IGMP Plus mode
    • Configure IGMP snooping manually
    • Configure the IGMP snooping settings for interfaces
    • Configure IGMP snooping for VLANs automatically with IGMP Plus mode
    • Configure IGMP snooping for VLANs manually
    • Configure an IGMP multicast router interface
    • Configure an IGMP multicast router VLAN
    • IGMP snooping querier overview
    • Configure the IGMP snooping querier global settings
    • Configure an IGMP snooping querier for a VLAN
    • Remove the IGMP snooping querier settings for a VLAN
    • Display the status of the IGMP snooping querier
  • Multicast Listener Discovery snooping
    • Configure MLD snooping automatically with MLD Plus mode
    • Configure MLD snooping manually
    • Configure the MLD snooping settings for interfaces
    • Configure MLD snooping for VLANs automatically with MLD Plus mode
    • Configure MLD snooping for VLANs manually
    • Remove the MLD snooping querier settings for a VLAN
    • Configure an MLD multicast router interface
    • Configure an MLD multicast router VLAN
    • Configure the MLD snooping querier global settings
    • Configure an MLD snooping querier for a VLAN
    • Remove the MLD snooping querier settings for a VLAN
  • Multicast VLAN registration
    • Configure the global MVR settings
    • Configure an MVR group
    • Remove an MVR group
    • Configure an MVR interface
    • Configure the interface members of an MVR group
    • Display the MVR statistics
  • MAC address table
    • View, search, or clear the MAC address table
    • Set the dynamic address aging interval
    • Add a static MAC address to the MAC address table
    • Remove a static MAC address from the MAC address table
  • Port settings
    • Configure and display the port settings
    • Add port, LAG, and VLAN descriptions
    • Display transceiver module information
    • Configure the port link flap settings
  • Link aggregation groups
    • Auto-LAG overview
    • Enable or disable Auto-LAGs
    • Configure the hash mode for Auto-LAGs
    • Configure the LAG settings
    • Configure a single LAG and its membership
  • 802.1AS timing and synchronization
    • Configure and view the global 802.1AS settings
    • Configure the 802.1AS interface settings
    • View the 802.1AS statistics
  • Multiple Registration Protocol and 802.1Qav settings
    • Configure the global MRP settings
    • Configure 802.1Qav mapping
    • Configure the MRP interface settings
    • View or clear MMRP statistics
    • View or clear MVRP statistics
    • View or clear MSRP statistics
    • View the MSRP reservation settings
    • Configure and view the Qav settings for interfaces
    • View MSRP streams information
  • Loop protection
    • About loop protection
    • Configure the global loop protection settings
    • Configure the loop protection settings for interfaces and display the loop protection state
• 4. Manage Routing
  • Routing concepts
  • Routing table, routes and route preferences
    • Configure a route and display learned routes
    • Delete a route
    • Specify route preferences
  • IPv4 routing
    • Manage the global IPv4 routing settings
    • Display the IPv4 statistics
    • Configure IPv4 routing interfaces
    • Delete the routing IP address from an IPv4 routing interface
    • Configure a secondary IP address for an IPv4 routing interface
    • Delete the secondary IP address from an IPv4 routing interface
  • IPv6 routing
    • Manage the global IPv6 routing settings
    • Display the IPv6 route table
    • Configure IPv6 routing interfaces
    • Configure prefix settings for an IPv6 routing interface
    • Delete a prefix setting from an IPv6 routing interface
    • Display the IPv6 and ICMPv6 statistics for an IPv6 routing interface
    • Display the IPv6 neighbor table or clear IPv6 neighbor entries
    • Configure IPv6 static routes
    • Delete an IPv6 static route
    • Configure the IPv6 route preference for the switch
    • Configure IPv6 tunnels
    • Delete an IPv6 tunnel
  • Routing VLANs
    • Create a routing VLAN with the VLAN static routing wizard
    • Configure routing for an existing VLAN
    • Remove the routing function from a VLAN
  • Address Resolution Protocol
    • Display the ARP entries in the ARP cache
    • Add or change a static entry in the ARP table
    • Delete a static ARP entry
    • Configure the ARP table settings or remove entries from the table
  • Routing Information Protocol
    • Enable or disable RIP on the switch
    • Configure the global RIP settings for the switch
    • Configure RIP interface settings
    • Configure the RIP route redistribution settings and display the route redistribution summary
  • Router discovery and router advertisements
• 5. Configure Multicast Routing
  • IPv4 multicast routing and the IPv4 multicast route table
    • Display the IPv4 multicast route table
    • Add static multicast entries to the IPv4 Mroute table
    • Delete a static multicast entry from the IPv4 Mroute table
    • Configure global multicast settings for the switch
    • Configure a multicast interface
  • IGMP for IPv4 multicast routing
    • Configure the global IGMP settings for the switch
    • Configure an IGMP routing interface
    • Display the statistics for the IGMP routing interfaces
    • Display the IGMP groups and search the IGMP group database
    • Display the IGMP membership information and search the IGMP membership database
    • Configure an IGMP proxy interface
    • Display the statistics for the IGMP proxy interface
    • Display the IGMP proxy membership and search the IGMP proxy membership database
  • PIM for IPv4 multicast routing
    • Configure the global PIM IPv4 settings on the switch
    • Add IPv4 PIM-SSM groups
    • Delete an IPv4 PIM-SSM group
    • Configure an IPv4 PIM interface
    • Display IPv4 PIM neighbors and search the PIM neighbor database
    • Add an IPv4 PIM candidate rendezvous point configuration
    • Delete an IPv4 PIM candidate rendezvous point configuration
    • Configure an interface as an IPv4 PIM bootstrap router candidate
    • Delete an IPv4 PIM bootstrap router candidate configuration
    • Configure a static IPv4 PIM rendezvous point for a group
    • Delete a static IPv4 PIM rendezvous point configuration
  • Static multicast routes for IPv4 addresses
    • Configure static multicast routes for IPv4 addresses
    • Delete a static multicast route for an IPv4 address
  • Multicast admin boundaries for IPv4 addresses
    • Configure an interface as a multicast admin boundary
    • Delete a multicast admin boundary configuration for an interface
  • IPv6 multicast routing and the IPv6 multicast route table
    • Display the IPv6 multicast route table
  • PIM for IPv6 multicast routing
    • Configure the global PIM IPv6 settings on the switch
    • Add IPv6 PIM-SSM groups
    • Delete an IPv6 PIM-SSM group
    • Configure an IPv6 PIM interface
    • Display IPv6 PIM neighbors and search the PIM neighbor database
    • Add an IPv6 PIM candidate rendezvous point configuration
    • Delete an IPv6 PIM candidate rendezvous point configuration
    • Configure an interface as an IPv6 PIM bootstrap router candidate
    • Delete an IPv6 PIM bootstrap router candidate configuration
    • Configure a static IPv6 PIM rendezvous point for a group
    • Delete a static IPv6 PIM rendezvous point configuration
  • MLD for IPv6 multicast routing
    • Configure the global MLP settings for the switch
    • Configure an MLD routing interface
    • Display the statistics for the MLD routing interfaces
    • Display the MLD groups and search the MLD group database
    • Display or clear MLD traffic statistics
    • Configure an MLD proxy interface
    • Display the statistics for the MLD proxy interface
    • Display the MLD proxy membership and search the MLD proxy membership database
  • Static multicast routes for IPv6 addresses
    • Configure static multicast routes for IPv6 addresses
    • Delete a static multicast route for an IPv6 address
• 6. Configure Quality of Service
  • Quality of Service concepts
  • Class of Service
    • CoS configuration concepts
    • Configure the CoS trust mode settings globally or for a specific interface
    • Map 802.1p priorities to queues
    • Map DSCP values to queues
    • Configure the CoS interface settings for an interface
    • Configure CoS queue settings for an interface
    • Configure the CoS WRED precedence settings for dropping packets
  • Differentiated Services
    • Defining DiffServ
    • DiffServ wizard overview
    • Use the DiffServ wizard to create a traffic class and policy for one or more interfaces
    • Configure the DiffServ mode and display the entries in the DiffServ private MIB tables
    • Configure a DiffServ class
      • Add and configure a DiffServ class
      • Rename an existing DiffServ class
      • Change the criteria for an existing DiffServ class
      • Delete a DiffServ class
    • Configure an IPv6 DiffServ class
      • Add and configure an IPv6 DiffServ class
      • Rename an existing IPv6 DiffServ class
      • Change the criteria for an existing IPv6 DiffServ class
      • Delete an IPv6 DiffServ class
    • Configure a DiffServ policy
      • <<TBD>>Create and configure a DiffServ policy
      • Rename an existing DiffServ policy
      • Change the policy attributes for an existing DiffServ policy
      • Change or remove a class from an existing DiffServ policy
      • Delete a DiffServ policy
    • Configure the DiffServ service interface
      • Attach DiffServ policies to an interface
      • Change one or both DiffServ policies for an interface
      • Remove one or both DiffServ policies from an interface
    • Display DiffServ service statistics
• 7. Manage Switch Security
  • User accounts and passwords
    • Add or change a user account
    • Delete a user account
    • Configure user password requirements
    • Change the privileged EXEC CLI password
    • Change the console, Telnet, or SSH password
  • RADIUS servers
    • Configure the global RADIUS server settings
    • Configure a RADIUS authentication server on the switch
      • Add a RADIUS authentication server to the switch
      • Modify the settings for a RADIUS authentication server on the switch
      • Remove a RADIUS authentication server from the switch
    • Configure a RADIUS accounting server
      • Add a RADIUS accounting server to the switch
      • Modify the settings for a RADIUS accounting server on the switch
      • Remove a RADIUS accounting server from the switch
  • TACACS+ servers
    • Configure the global TACACS+ settings
    • Add a TACACS+ server to the switch
    • Modify the settings for a TACACS+ server on the switch
    • Remove a TACACS+ server from the switch
  • Authentication lists
    • Configure a login authentication list
    • Delete a login authentication list
    • Configure an enable authentication list
    • Delete an enable authentication list
    • Configure the Dot1x authentication list
    • Configure the HTTP authentication list
    • Configure the HTTPS authentication List
  • Current login sessions
  • HHTP and HTTPS management access
    • Configure HTTP access settings
    • Configure the HTTPS access settings
    • Browser security message with HTTPS access
    • Manage certificates for HTTPS access
      • Display the status of the SSL certificates
      • Generate an SSL certificate
      • Activate a certificate
      • Delete an SSL certificate
      • Transfer an existing HTTPS certificate from a server to the switch
  • SSH management access
    • Configure the global SSH access settings
    • Manage RSA and DSA keys for SSH access
      • Generate an RSA or DSA key
      • Delete an RSA or DSA key
      • Transfer existing SSH keys from a TFTP server to the switch
  • Telnet management access
    • Select Telnet authentication lists
    • Configure inbound Telnet settings
    • Configure outbound Telnet settings
  • Console port management access
  • Denial of service
  • Management access profiles and rules
    • Add an access profile
    • Add a rule to the access profile
    • Activate the access profile
    • Display the access profile summary and the number of filtered packets
    • Deactivate an access profile
    • Remove an access profile
  • Port authentication
    • Configure the global 802.1X settings
    • Manage port authentication on individual ports
      • Configure 802.1X settings for a port
      • Initialize 802.1X on a port
    • Display the port summary
    • Display the client summary
  • MAC filters for traffic control
    • Create a MAC filter
    • Delete a MAC filter
    • Display the MAC filter summary
  • Port security
    • Configure the global port security mode
    • Configure a port security interface
    • Display learned MAC addresses and convert them to static addresses
    • Add a static MAC address to the MAC address table for port security
    • Remove a static MAC address from the MAC address table for port security
  • Private port groups
    • Add a private port group
    • Remove a private port group
    • Configure the membership of a private port group
  • Protect ports
  • Private VLANs
    • Overview of the tasks for private VLAN configuration
    • Assign a private VLAN type to a VLAN
    • Configure a private VLAN association with a primary and secondary VLAN
    • Remove an existing private VLAN association
    • Configure the private VLAN port mode
    • Private VLAN host interface: Assign the interface to primary and secondary VLANs
    • Private VLAN host interface: Remove the interface from primary and secondary VLANs
    • Private VLAN promiscuous interface: Assign the interface to primary and secondary VLANs
    • Private VLAN promiscuous interface: Remove the interface from primary and secondary VLANs
    • Private VLAN promiscuous trunk interface: Add primary and secondary VLANs to the trunk
    • Private VLAN promiscuous trunk interface: Remove primary and secondary VLANs from the trunk
    • Private VLAN isolated trunk interface: Add primary and secondary VLANs to the trunk
    • Private VLAN isolated trunk interface: Remove primary and secondary VLANs from the trunk
    • Configure native and allowed VLANs on a private VLAN trunk interface
  • Storm control
    • Configure global storm control settings
    • Configure storm control settings for one or more ports
  • DHCP snooping
    • Enable DHCP snooping for the switch
    • Enable DHCP snooping for a VLAN
    • Configure DHCP snooping interface settings
    • Add a static DHCP binding and display dynamic DHCP bindings
    • Remove a static DHCP binding
    • Configure DHCP snooping persistent settings
    • Display or clear DHCP snooping statistics
  • DHCPv6 snooping
    • Enable DHCPv6 snooping for the switch
    • Enable DHCPv6 snooping for a VLAN
    • Configure DHCPv6 snooping interface settings
    • Add a static DHCPv6 binding and display dynamic DHCPv6 bindings
    • Remove a static DHCPv6 binding
    • Configure DHCPv6 snooping persistent settings
    • Display or clear DHCPv6 snooping statistics
  • IP source guard interfaces
    • Configure IP source guard on an interface
    • Add a static IP source guard binding and display dynamic IP source guard bindings
    • Remove a static IP source guard binding
  • IPv6 source guard interfaces
    • Configure IPv6 source guard on an interface
    • Add a static IPv6 source guard binding and display dynamic IPv6 source guard bindings
    • Remove a static IPv6 source guard binding
  • Dynamic ARP inspection
    • Configure the global DAI settings
    • Configure DAI VLANs
    • Configure DAI interfaces
    • Create a DAI access control list
    • Configure a rule for an existing DAI ACL
    • Delete a rule from an existing DAI ACL
    • Delete a DAI access control list
    • Display the DAI statistics
  • Captive portals
    • Configure the global captive portal settings
    • Configure a captive portal
    • Delete a captive portal
    • Configure a captive portal binding
    • Display or delete captive portal bindings in the captive portal binding table
    • Configure captive portal groups
      • Add a captive portal group
      • Remove a captive portal group
    • Configure captive portal users
      • Add or modify a captive portal user account
      • Delete a captive portal user account
    • Configure the captive portal trap flag settings
    • Display or clear captive portal client statistics
  • Access control lists
    • Use the ACL Wizard to create a simple ACL
      • Use the ACL Wizard to create an ACL
      • Modify an ACL rule that you created with the ACL Wizard
      • Delete an ACL rule that you created with the ACL Wizard
      • ACL Wizard example
    • Configure a MAC ACL
      • Add a MAC ACL
      • Change the name of a MAC ACL
      • Delete a MAC ACL
    • Configure MAC ACL rules
      • Add a rule to a MAC ACL
      • Change the match criteria for a MAC rule
      • Delete a rule for a MAC ACL
    • Configure MAC bindings
    • Display or delete MAC ACL bindings in the MAC binding table
    • Configure a basic or extended IPv4 ACL
      • Add an IPv4 ACL
      • Change the number or name of an IPv4 ACL
      • Delete an IPv4 ACL
    • Configure rules for a basic IP ACL
      • Add a rule for a basic IPv4 ACL
      • Modify the match criteria for a basic IPv4 ACL rule
      • Delete a basic IPv4 ACL rule
    • Configure rules for an extended IPv4 ACL
      • Add a rule for an extended IPv4 ACL
      • Modify the match criteria for an extended IPv4 ACL rule
      • Delete an extended IPv4 ACL rule
    • Configure an IPv6 ACL
      • Add an IPv6 ACL
      • Change the name of an IPv6 ACL
      • Delete an IPv6 ACL
    • Configure rules for an IPv6 ACL
      • Add a rule for an IPv6 ACL
      • Modify the match criteria for an IPv6 ACL rule
      • Delete an IPv6 ACL rule
    • Configure IP ACL interface bindings
    • Display or delete IP ACL bindings in the IP ACL binding table
    • Configure VLAN ACL bindings
      • Add a VLAN ACL binding
      • Remove a VLAN ACL binding
• 8. Monitor the Switch and Network
  • Port and EAP packet statistics
    • Display or clear port statistics
    • Display or clear detailed statistics for a port
    • Display or clear EAP and EAPoL statistics
  • Perform a cable test
  • Logs
    • Manage and display the memory log
    • Message log format
    • Enable or disable the command configuration log
    • Enable or disable console logging
  • Syslog and log server host settings
    • Configure the syslog settings
    • Add a syslog server
    • Modify the settings for a syslog server
    • Delete the settings for a syslog server
  • Trap log
  • Event log
  • Port mirroring
  • RSPAN VLANs and source and destination switches
    • Configure an existing VLAN as an RSPAN VLAN
    • Configure the switch as an RSPAN source switch
    • Configure the switch as an RSPAN destination switch
  • sFlow monitoring
    • sFlow agent overview
    • Configure the source interface for the sFlow agent
    • Configure an sFlow receiver
    • Configure sFlow polling and sampling on an interface
  • Display license information
    • Display license key information
    • Display features to which the license applies
• 9. Maintenance and Troubleshooting
  • Save the configuration
  • Automatic installation of the configuration file
    • Configure the auto install process
    • Option 125 DHCP server requirements for obtaining an configuration file through auto install
  • Reboot the switch from the main local browser UI
  • Reset the switch to the factory default settings
  • Export a file from the switch
    • Export a file from the switch to a server
    • Use HTTP to export a file from the switch to a computer
    • Export a file from the switch to a USB storage device
  • Upgrade software or download a file
    • Upgrade the software image or download a file from a server to the switch
    • Use HTTP to download a file to the switch or update the software image
    • Download a file from a USB storage device to the switch
    • Use an HTTP session to download and install an SSL security certificate file on the switch
  • Manage software images
    • Copy a software image
    • Configure dual image settings
      • Change the software image that loads when the switch starts or reboots
      • Delete a software image
  • Diagnostics and troubleshooting
    • Ping an IPv4 address
    • Ping an IPv6 address
    • Send an IPv4 traceroute
    • Send an IPv6 traceroute
    • Capture Packets
    • Perform a full memory dump
• A. Configuration Examples
  • Virtual Local Area Networks (VLANs)
    • VLAN configuration examples
  • Access control lists (ACLs)
    • MAC ACL sample configuration
    • Basic IP ACL sample configuration
  • Differentiated Services (DiffServ)
    • Class
    • DiffServ traffic classes
    • Create policies
      • Traffic conditioning policy
    • DiffServ example configuration
  • 802.1X access control
    • 802.1X example configuration
  • Multiple Spanning Tree Protocol
    • MSTP example configuration
  • VLAN routing interfaces
• B. Software Default Settings and Hardware Specifications
  • Access default settings for the switch device UI
  • System features default settings
  • Switching features default settings
  • Routing and multicast features default settings
  • QoS features default settings
  • Security features default settings
  • Monitoring features default settings
  • Model-specific hardware technical specifications
    • Model M4250-10G2F-PoE+ (SKU GSM4212P)
    • Model M4250-10G2XF-PoE+ (SKU GSM4212PX)
    • M4250-10G2XF-PoE++ (SKU GSM4212UX)
    • M4250-26G4F-PoE+ (SKU GSM4230P)
    • M4250-26G4XF-PoE+ (SKU GSM4230PX)
    • M4250-26G4F-PoE++ (SKU GSM4230UP)
    • M4250-40G8F-PoE+ (SKU GSM4248P)
    • M4250-40G8XF-PoE+ (SKU GSM4248PX)
    • M4250-40G8XF-PoE++ (SKU GSM4248UX)
    • M4250-12M2XF (SKU MSM4214X)
    • M4250-16XF (SKU XSM4216F)
  • General hardware technical specifications