Document Outline

• Nikon
  • Speedlight Parts
  • Main Features
    • ■ Matrix Balanced Fill-Flash Photography (Nikonos RS only)
  • About this Manual
  • CONTENTS
  • Tips on Speedlight Care
  • Checking 0-rings
    • I Be sure to check the 0-rings before use.
    • I O-ring areas to check
  • Removing and Reseating 0-rings
    • Remove the 0-rings from their channels.
    • »Caution
      • Reseat the 0-ring into their channels.
    • ♦Note
  • Installing the Battery
    • I Important
    • ♦Note
      • I Important
    • •Caution
  • Function Selector
    • ^3 standard flash photography
    • ^ Test firing
    • Signai Flash
    • (Q) Camera Slave (cordless remote photography)
    • (5] Flash Slave
    • I Important
  • Flash Mode Selector
    • ao TTL flash mode
    • mFULL m1/4 m1/16 Manual flash mode
  • Basic Flash Photography with the Nikonos RS
    • > Set the camera’s sync mode to any . desired mode.
    • I The Speedlight’s function seiector i is set to “Standard.”
    • The Speediight's fiash mode ■ selector is set to TTL.
    • Power switch is ON.
    • Set the focus mode on the Nikonos RS to “S” or “C”.
    • Set exposure mode to aperture- priority auto exposure (A).
    • Check the flash shooting distance range and to be sure that the ready- light is lit up to shoot.
    • • Caution
      • Set the SB-104 and the camera.
      • Press the shutter release button to shoot.
  • Caring for the SB-104 After Use
  • standby Switch
    • When the Standby switch is ON...
    • When the Standby switch is OFF...
    • • Caution
    • ♦Note
  • Alert Signal Lamps
    • Ready-light blinks.
    • ♦Note
    • Moisture alert light blinks.
    • Heat alert light blinks.
    • Electrical alert light blinks.
    • ♦Note
    • Reading the Exposure Calculation Chart
      • Changing the distance scaie chart and exposure caicuiation charts
      • Objects underwater appear closer than they actually are.
      • ■Important
      • ♦Note
      • ■ Important
      • ♦Note
        • • Caution
        • I Important
    • Basic Tips on Underwater Flash Photography
      • The Role of the Speedlight...
      • Taking photographs highlighting the blue of the sea...
      • When shooting brightly shining fish...
      • When sand has been stirred up in the water...
    • Camera Slave (Cordless Remote Photography)
      • ■ Important
      • • Caution
      • ♦Notes
    • Flash Slave
      • ■ Important
        • Turn ON the power switches on ' both Speedlights, and be sure the ready-lights are lit.
      • • Caution
      • ♦Notes
    • Rear-Curtain Sync Photography
      • ■ Important
        • I Set the f/stop and shutter speed on I the camera.
      • •Caution
        • Press the shutter release button ' slightly and check the viewfinder indicator:
        • Check the flash shooting distance • range, and release the shutter.
    • Using the Flash Signal Function
    • Optional Accessories
      • Extension Arm SK-104E
      • Arm SK-104C for Speedlights SB-102, SB-103
      • Double Bracket SK-104W
        • ♦Note
      • Double Sync Cord SC-100
        • • Caution
      • NiCd Battery Unit SN-104
      • Quick Charger SH-104
      • 0-Ring and Screw Set
    • Details on NiCd Battery Unit SN-104
      • Notes on using the NiCd battery
      • Tips on carrying and storing the SN-104
      • When recharging the SN-104 battery pack...
    • Tips on SB-104 Care
      • Notes of Caution
        • Do not subject the Speedlight to vibrations or shock.
        • Do not jump into the water while holding the Speedlight.
        • Do not subject the Speedlight to excessive heat.
        • Prevent dirt, mud, sand, dust, water, salt, or other foreign matter from entering the Speedlight.
        • Take care not to splash water into the battery chamber or onto the NiCd batteries.
        • If the Speediight gets soiled...
        • Never disassemble the Speediight.
      • Carrying the SB-104
        • When transporting the SB-104...
        • Do not subject the Speedlight to vibrations or shock.
        • Do not carry the Speediight by the sync cord.
      • Safekeeping the SB-104
        • Remove the NiCd battery.
        • When storing the SB-104...
        • Test fire the Speedlight about once a month.
    • Specifications
      • Correction
      • Berichtigung
      • Correction
      • Corrección