Document Outline

• 1.Declaration of Conformity
  • 1.1 Declaration of Conformity
  • 1.2 Package Contents
  • 2.Safety Information
    • 2.1.1 Safety Symbols
      • 2.1.2 Safety Terms.
    • 2.2 General Safety Information
  • 3. General Characteristics
  • 4. Performing the General Inspection
    • 4.1 Performing the General Inspection
      • 4.1.1 Check whether there is any Damage on it Due to Transportation
      • 4.1.2 Make a Check on Accessories
      • 4.1.3 Make a Check on the Complete Instrument
  • 5. Input Connections
    • 5.1 Input Connections
    • 5.2 Description for Front Panel and Keys
  • 6. Using the Scope
    • 6.1 About this Chapter
    • 6.2 Power-Up the Oscilloscope
    • 6.3 Oscilloscope Operation Window
    • 6.4 Navigating a Menu
    • 6.5 Manually Setting the Vertical System, Horizontal System and Trigger Position
    • 6.6 Resetting the Oscilloscope
    • 6.7 Input Connections
    • 6.8 Displaying an Unknown Signal with Auto Set
    • 6.9 Automatic Zero-returning of Trigger Horizontal Position and 50% setting of Trigger Level Position
    • 6.10 Automatic Measurements
    • 6.11 Freezing the Screen
    • 6.12 Using Average for Smoothing Waveforms
    • 6.13 Using Persistence to Display Waveforms
    • 6.14 Using Peak Detection to Display Glitches
    • 6.15 Selecting AC-coupling
    • 6.16 Reversing the Polarity of the Displayed Waveform
  • 7. Using the Multimeter
    • 7.1 About this Chapter
    • 7.2 Making Meter Connections
    • 7.3 Multimeter Operation Window
    • 7.4 Making Multimeter Measurements
      • 7.4.1 Measuring Resistance Values
      • 7.4.2 Making a Diode Measurement
      • 7.4.3 On-off Test
      • 7.4.4 Making a Capacitance Measurement
      • 7.4.5 Making a DC Voltage Measurement
      • 7.4.6 Making a AC Voltage Measurement
      • 7.4.7 Making a DC Current Measurement
      • 7.4.8 Making an AC Current Measurement
    • 7.5 Freezing the Readings
    • 7.6 Taking a Relative Measurement
    • 7.7 Selecting Automatic/Manual Range Adjustment
  • 8.Advanced Function of Oscilloscope
    • 8.1 About this Chapter
    • 8.2 Setting the Channel
      • 8.2.1 Setting the Channel Coupling
      • 8.2.2 Make Open and Close Settings on Channel
      • 8.2.3 Adjusting the Probe Scale
      • 8.2.4 Setting of Inverted Waveform
    • 8.3 Setting the Trigger System
    • 8.4 Triggering Control
      • 8.4.1 Edge Triggering
        • Description
      • 8.4.2 Video Triggering
        • Description
    • 8.5 Acquiring Mode Setting
    • 8.6 Display Setting
      • Settings
      • 8.6.1 Display Style
      • 8.6.2 Persistence
      • 8.6.3 Cymometer
    • 8.7 Waveform Saving Setups
    • 8.8 Function Setting Menu
      • Setting
    • 8.9 Making Automatic Measurements
      • Description
    • 8.10 Setting the Cursor Measurements
    • 8.11 Autoscale
    • 8.12 System State Menu
    • 8.13 Setting of Time Base Mode
    • 8.14 Data Transmission
  • 9.Trouble Shooting
  • 10.Appendix
    • 10.1 Appendix A: Specifications
      • 10.1.1 Oscilloscope
      • 10.1.2 Meter
      • 10.1.3 General Specifications
    • 10.2 Appendix B: Maintenance and Cleaning
      • 10.2.1 Common Maintenance
      • 10.2.2 Storage of Oscilloscope
      • 10.2.3 Replacing the Lithium Battery Unit