Document Outline

• Introduction
  • About this Feature Guide
  • Terms used in this Feature Guide
  • About the other manuals
  • Feature Highlights
• Table of Contents
  • 1 Call Handling Features
  • 2 System Configuration and Administration Features
  • 3 Programming Instructions
  • 4 Appendix
  • Index
• Call Handling Features
  • 1.1 Incoming Call Features
    • 1.1.1 Incoming Trunk Call Features
      • 1.1.1.1 Incoming Trunk Call Features—SUMMARY
      • 1.1.1.2 Direct In Line (DIL)
      • 1.1.1.3 Direct Inward Dialling (DID)/Direct Dialling In (DDI)
      • 1.1.1.4 Multiple Subscriber Number (MSN) Ringing Service
      • 1.1.1.5 Calling Line Identification (CLI) Distribution
      • 1.1.1.6 Intercept Routing
      • 1.1.1.7 Intercept Routing—No Destination
    • 1.1.2 Internal Call Features
      • 1.1.2.1 Internal Call Features—SUMMARY
      • 1.1.2.2 Internal Call Block
    • 1.1.3 Incoming Call Indication Features
      • 1.1.3.1 Incoming Call Indication Features—SUMMARY
      • 1.1.3.2 Ring Tone Pattern Selection
      • 1.1.3.3 Call Waiting
  • 1.2 Receiving Group Features
    • 1.2.1 Idle Extension Hunting
    • 1.2.2 Incoming Call Distribution Group Features
      • 1.2.2.1 Incoming Call Distribution Group Features—SUMMARY
      • 1.2.2.2 Group Call Distribution
      • 1.2.2.3 Queuing Feature
      • 1.2.2.4 VIP Call
      • 1.2.2.5 Overflow Feature
      • 1.2.2.6 Log-in/Log-out
      • 1.2.2.7 Supervisory Feature
  • 1.3 Call Forwarding (FWD)/Do Not Disturb (DND) Features
    • 1.3.1 Call Forwarding (FWD)/Do Not Disturb (DND)
      • 1.3.1.1 Call Forwarding (FWD)/Do Not Disturb (DND)— SUMMARY
      • 1.3.1.2 Call Forwarding (FWD)
      • 1.3.1.3 Do Not Disturb (DND)
  • 1.4 Answering Features
    • 1.4.1 Answering Features
      • 1.4.1.1 Answering Features—SUMMARY
      • 1.4.1.2 Line Preference—Incoming
      • 1.4.1.3 Call Pickup
      • 1.4.1.4 Hands-free Answerback
  • 1.5 Making Call Features
    • 1.5.1 Predialling
    • 1.5.2 Automatic Extension Release
    • 1.5.3 Intercom Call
    • 1.5.4 Trunk Call Features
      • 1.5.4.1 Trunk Call Features—SUMMARY
      • 1.5.4.2 Emergency Call
      • 1.5.4.3 Account Code Entry
      • 1.5.4.4 Dial Type Selection
      • 1.5.4.5 Reverse Circuit
      • 1.5.4.6 Pause Insertion
      • 1.5.4.7 Host PBX Access Code (Access Code to the Telephone Company from a Host PBX)
      • 1.5.4.8 Special Carrier Access Code
    • 1.5.5 Seizing a Line Features
      • 1.5.5.1 Seizing a Line Features—SUMMARY
      • 1.5.5.2 Line Preference—Outgoing
      • 1.5.5.3 Trunk Access
  • 1.6 Memory Dialling Features
    • 1.6.1 Memory Dialling Features
      • 1.6.1.1 Memory Dialling Features—SUMMARY
      • 1.6.1.2 One-touch Dialling
      • 1.6.1.3 Last Number Redial
      • 1.6.1.4 Speed Dialling—Personal/System
      • 1.6.1.5 Quick Dialling
      • 1.6.1.6 Hot Line
  • 1.7 Busy Line/Busy Party Features
    • 1.7.1 Automatic Callback Busy (Camp-On)
    • 1.7.2 Executive Busy Override
    • 1.7.3 Call Monitor
    • 1.7.4 Second Call Notification to Busy Extension
      • 1.7.4.1 Second Call Notification to Busy Extension—SUMMARY
      • 1.7.4.2 Call Waiting Tone
      • 1.7.4.3 Off-Hook Call Announcement (OHCA)
      • 1.7.4.4 Whisper OHCA
  • 1.8 Toll Restriction (TRS)/Call Barring (Barring) Features
    • 1.8.1 Toll Restriction (TRS)/Call Barring (Barring)
    • 1.8.2 Budget Management
    • 1.8.3 Extension Lock
    • 1.8.4 Dial Tone Transfer
    • 1.8.5 Walking COS
    • 1.8.6 Verified Code Entry
  • 1.9 Automatic Route Selection (ARS) Features
    • 1.9.1 Automatic Route Selection (ARS)
  • 1.10 Conversation Features
    • 1.10.1 Hands-free Operation
    • 1.10.2 Off-Hook Monitor
    • 1.10.3 Mute
    • 1.10.4 Headset Operation
    • 1.10.5 Data Line Security
    • 1.10.6 Flash/Recall/Terminate
    • 1.10.7 External Feature Access (EFA)
    • 1.10.8 Trunk Call Limitation
    • 1.10.9 Parallelled Telephone
    • 1.10.10 Calling Party Control (CPC) Signal Detection
  • 1.11 Transferring Features
    • 1.11.1 Call Transfer
  • 1.12 Holding Features
    • 1.12.1 Call Hold
    • 1.12.2 Call Park
    • 1.12.3 Call Splitting
    • 1.12.4 Music on Hold
  • 1.13 Conference Features
    • 1.13.1 Conference Features
      • 1.13.1.1 Conference Features—SUMMARY
      • 1.13.1.2 Conference
      • 1.13.1.3 Privacy Release
  • 1.14 Paging Features
    • 1.14.1 Paging
  • 1.15 Optional Device Features
    • 1.15.1 Doorphone Call
    • 1.15.2 Door Open
    • 1.15.3 Trunk Answer From Any Station (TAFAS)
    • 1.15.4 Background Music (BGM)
    • 1.15.5 Outgoing Message (OGM)
    • 1.15.6 Direct Inward System Access (DISA)
  • 1.16 Caller ID Features
    • 1.16.1 Caller ID
    • 1.16.2 Incoming Call Log
  • 1.17 Message Features
    • 1.17.1 Message Waiting
    • 1.17.2 Absent Message
  • 1.18 Proprietary Telephone (PT) Features
    • 1.18.1 Fixed Buttons
    • 1.18.2 Flexible Buttons
    • 1.18.3 LED Indication
    • 1.18.4 Display Information
  • 1.19 Integrated Services Digital Network (ISDN) Service Features
    • 1.19.1 Integrated Services Digital Network (ISDN)
      • 1.19.1.1 Integrated Services Digital Network (ISDN)—SUMMARY
      • 1.19.1.2 Calling/Connected Line Identification Presentation (CLIP/COLP)
      • 1.19.1.3 Advice of Charge (AOC)
      • 1.19.1.4 Call Forwarding (CF)—by ISDN (P-MP)
      • 1.19.1.5 Call Forwarding (CF)—by ISDN (P-P)
      • 1.19.1.6 Call Hold (HOLD)—by ISDN
      • 1.19.1.7 Call Transfer (CT)—by ISDN
      • 1.19.1.8 Malicious Call Identification (MCID)
      • 1.19.1.9 Completion of Calls to Busy Subscriber (CCBS)
      • 1.19.1.10 ISDN Extension
      • 1.19.1.11 ISDN Service Access by Keypad Protocol
  • 1.20 E1 Line Service Features
    • 1.20.1 E1 Line Service
  • 1.21 T1 Line Service Features
    • 1.21.1 T1 Line Service
  • 1.22 Voice Mail Features
    • 1.22.1 Voice Mail (VM) Group
    • 1.22.2 Voice Mail DTMF Integration
    • 1.22.3 Voice Mail DPT (Digital) Integration
  • 1.23 Portable Station (PS) Features
    • 1.23.1 Portable Station (PS) Connection
    • 1.23.2 PS Ring Group
    • 1.23.3 PS Directory
    • 1.23.4 PS Feature Buttons
    • 1.23.5 Wireless XDP Parallel Mode
  • 1.24 Administrative Information Output Features
    • 1.24.1 Station Message Detail Recording (SMDR)
    • 1.24.2 Charge Meter
  • 1.25 Extension Controlling Features
    • 1.25.1 Extension Personal Identification Number (PIN)
    • 1.25.2 Personal Programme Clear
    • 1.25.3 Walking Extension
    • 1.25.4 Timed Reminder
    • 1.25.5 Remote Extension Control by User
  • 1.26 Audible Tone Features
    • 1.26.1 Dial Tone
    • 1.26.2 Confirmation Tone
  • 1.27 Networking Features
    • 1.27.1 TIE Line Service
    • 1.27.2 Virtual Private Network (VPN)
    • 1.27.3 QSIG Network
      • 1.27.3.1 QSIG Network—SUMMARY
      • 1.27.3.2 Calling/Connected Line Identification Presentation (CLIP/COLP) and Calling/Connected Nam...
      • 1.27.3.3 Call Forwarding (CF)—by QSIG
      • 1.27.3.4 Call Transfer (CT)—by QSIG
      • 1.27.3.5 Completion of Calls to Busy Subscriber (CCBS)—by QSIG
    • 1.27.4 Voice over Internet Protocol (VoIP) Network
  • 1.28 Computer Telephony Integration (CTI) Features
    • 1.28.1 Computer Telephony Integration (CTI)
• System Configuration and Administration Features
  • 2.1 System Configuration—Hardware
    • 2.1.1 Extension Port Configuration
  • 2.2 System Configuration—Software
    • 2.2.1 Class of Service (COS)
    • 2.2.2 Group
    • 2.2.3 Tenant Service
    • 2.2.4 Time Service
    • 2.2.5 Operator Features
    • 2.2.6 Manager Features
  • 2.3 System Data Control
    • 2.3.1 PC Programming
    • 2.3.2 PT Programming
    • 2.3.3 Quick Setup
    • 2.3.4 Automatic Setup
    • 2.3.5 Flexible Numbering/Fixed Numbering
    • 2.3.6 Floating Extension
    • 2.3.7 Software Upgrading
  • 2.4 Fault Recovery/Diagnostics
    • 2.4.1 Power Failure Transfer
    • 2.4.2 Power Failure Restart
    • 2.4.3 Local Alarm Information
• Programming Instructions
  • 3.1 Introduction
    • 3.1.1 Introduction
      • Ways to Programme
      • Password Security
  • 3.2 PC Programming
    • 3.2.1 Installing and Starting the KX-TDA Maintenance Console
      • System Requirements
      • Installing the KX-TDA Maintenance Console and Selecting Appropriate Country/Area Data
      • Starting the KX-TDA Maintenance Console and Assigning the Basic Items (Quick Setup)
  • 3.3 PT Programming
    • 3.3.1 Programming Instructions
      • Required Telephone/Extension
      • Entering System Programming Mode
      • Programming Structure
      • Entering Characters
    • 3.3.2 Basic Programming
      • Date & Time [000]
      • System Speed Dialling Number [001]
      • System Speed Dialling Name [002]
      • Extension Number [003]
      • Extension Name [004]
      • Extension Personal Identification Number (PIN) [005]
      • Operator Assignment [006]
      • Console Paired Telephone [007]
      • Absent Message [008]
      • Charge Margin [010]
      • Charge Tax [011]
      • Charge Rate per Unit [012]
    • 3.3.3 System Programming
      • Flexible Numbering [100]
      • Time Service Switching Mode [101]
      • Time Service Starting Time [102]
      • Idle Line Access (Local Access) [103]
      • System Password for Administrator—for PT Programming [110]
      • System Password for User—for PT Programming [111]
      • Manager Password [112]
      • Verified Code [120]
      • Verified Code Name [121]
      • Verified Code Personal Identification Number (PIN) [122]
      • Verified Code COS Number [123]
      • Decimal Point Position for Currency [130]
      • Currency [131]
      • Main Processing (MPR) Software Version Reference [190]
    • 3.3.4 Time Programming
      • Hold Recall Time [200]
      • Transfer Recall Time [201]
      • Intercept Time [203]
      • Hot Line Waiting Time [204]
      • Automatic Redial Repeat Times [205]
      • Automatic Redial Interval [206]
      • Door Open Duration Time [207]
      • Call Duration Count Starting Time for LCOT [208]
      • DISA Delayed Answer Time [209]
      • DISA Trunk-to-Trunk Call Prolong Time [210]
      • DISA Intercept Time [211]
    • 3.3.5 TRS/Barring/ARS Programming
      • TRS/Barring Override by System Speed Dialling [300]
      • TRS/Barring Denied Code [301]
      • TRS/Barring Exception Code [302]
      • Special Carrier Access Code [303]
      • Emergency Number [304]
      • ARS Mode [320]
      • ARS Leading Number [321]
      • ARS Routing Plan Table Number [322]
      • ARS Exception Number [325]
      • ARS Routing Plan Time Table [330]
      • ARS Routing Plan Table (1–16) [331–346]
      • ARS Carrier Name [350]
      • ARS Trunk Group for Carrier Access [351]
      • ARS Removed Number of Digits for Carrier Access [352]
      • ARS Carrier Access Code [353]
    • 3.3.6 Trunk Programming
      • LCOT/BRI Trunk Connection [400]
      • LCOT/BRI Trunk Name [401]
      • LCOT/BRI Trunk Group Number [402]
      • LCOT/BRI Trunk Number Reference [409]
      • LCOT Dialling Mode [410]
      • LCOT Pulse Rate [411]
      • LCOT DTMF Minimum Duration [412]
      • LCOT CPC Signal Detection Time—Outgoing [413]
      • LCOT CPC Signal Detection Time—Incoming [414]
      • LCOT Reverse Circuit [415]
      • LCOT Pause Time [416]
      • LCOT Flash/Recall Time [417]
      • LCOT Disconnect Time [418]
      • BRI Network Type [420]
      • BRI DIL/DDI/MSN Selection [421]
      • BRI Subscriber Number [422]
      • BRI Layer 1 Active Mode [424]
      • BRI Layer 2 Active Mode [425]
      • BRI Configuration [426]
      • BRI TEI Mode [427]
      • DIL 1:1 Destination [450]
      • DID Number [451]
      • DID Name [452]
      • DID Destination [453]
      • Trunk Group Intercept Destination [470]
      • Host PBX Access Code [471]
      • Extension-to-Trunk Call Duration [472]
      • Trunk-to-Trunk Call Duration [473]
      • DISA Silence Detection [475]
      • DISA Continuous Signal Detection [476]
      • DISA Cyclic Signal Detection [477]
      • Caller ID Signal Type [490]
      • Pay Tone Signal Type [491]
    • 3.3.7 COS Programming
      • Trunk Group Number [500]
      • TRS/Barring Level [501]
      • Trunk Call Duration Limitation [502]
      • Call Transfer to Trunk [503]
      • Call Forwarding to Trunk [504]
      • Executive Busy Override [505]
      • Executive Busy Override Deny [506]
      • DND Override [507]
      • Account Code Mode [508]
      • TRS/Barring Level for System Speed Dialling [509]
      • TRS/Barring Level for Extension Lock [510]
      • Manager Assignment [511]
      • Permission for Door Open Access [512]
      • Time Service Manual Switching [514]
      • Wireless XDP Parallel Mode for Paired Telephone [515]
      • Programming Mode Limitation [516]
    • 3.3.8 Extension Programming
      • EXtra Device Port (XDP) Mode [600]
      • Terminal Device Assignment [601]
      • Class of Service [602]
      • User Group [603]
      • Extension Intercept Destination [604]
      • Call Forwarding—No Answer Time [605]
      • CLIP/COLP Number [606]
      • Incoming Call Distribution Group Member [620]
      • Incoming Call Distribution Group Delayed Ringing [621]
      • Incoming Call Distribution Group Floating Extension Number [622]
      • Incoming Call Distribution Group Name [623]
      • Incoming Call Distribution Group Distribution Method [624]
      • Destination for Overflow Time Expiration [625]
      • Overflow Time [626]
      • Destination When All Busy [627]
      • Queuing Call Capacity [628]
      • Queuing Hurry-up Level [629]
      • Queuing Time Table [630]
      • Sequences in Queuing Time Table [631]
      • Maximum Number of Agents [632]
      • User Groups of a Paging Group [640]
      • External Pagers of a Paging Group [641]
      • User Groups of a Pickup Group [650]
      • VM Group Floating Extension Number [660]
      • Idle Extension Hunting Type [680]
      • Idle Extension Hunting Group Member [681]
      • PS Registration [690]
      • PS Termination [691]
      • Personal Identification Number (PIN) for PS Registration [692]
    • 3.3.9 Resource/Interface Programming
      • External Pager Floating Extension Number [700]
      • Music Source Selection for BGM2 [710]
      • Music on Hold [711]
      • Music for Transfer [712]
      • Doorphone Call Destination [720]
      • Doorphone Number Reference [729]
      • Outgoing Message (OGM) Floating Extension Number [730]
      • Outgoing Message (OGM) Name [731]
      • DISA Security Mode [732]
    • 3.3.10 SMDR & Maintenance Programming
      • RS-232C Parameter—New Line Code [800]
      • RS-232C Parameter—Baud Rate [800]
      • RS-232C Parameter—Word Length [800]
      • RS-232C Parameter—Parity Bit [800]
      • RS-232C Parameter—Stop Bit Length [800]
      • External Modem Control [801]
      • SMDR Page Length [802]
      • SMDR Skip Perforation [803]
      • SMDR Outgoing Call Printing [804]
      • SMDR Incoming Call Printing [805]
      • Remote Programming [810]
      • Modem Floating Extension Number [811]
      • ISDN Remote Floating Extension Number [812]
    • 3.3.11 Card Programming
      • Slot Card Type Reference [900]
      • Slot Card Deletion [901]
      • Slot Card Reset [902]
      • OPB3 Option Card Type Reference [910]
      • OPB3 Option Card Deletion [911]
• Appendix
  • 4.1 Capacity of System Resources
    • 4.1.1 Capacity of System Resources
  • 4.2 Tones/Ring Tones
    • 4.2.1 Tones/Ring Tones
  • 4.3 List of Abbreviations
    • 4.3.1 List of Abbreviations
• Index
  • A
  • B
  • C
  • D
  • E
  • F
  • G
  • H
  • I
  • L
  • M
  • N
  • O
  • P
  • Q
  • R
  • S
  • T
  • U
  • V
  • W
  • X