Document Outline

• Introduction
  • SPECIFICATIONS
  • OTHER INFORMATION
    • • Back up battery for memory
    • • Dead Spot
• Precautions
  • UNPACKING
  • ACCESSORIES
  • Connecting Optional Equipments
    • • To remove the fuse;
    • • To install the fuse;
    • Installation with KX-G20
• Control Functions
  • LCD-Liquid Crystal Display.
  • Scan (TRI) Button
  • (TRI)
  • Channel Down Button.
  • WX (U/l/C) Button
  • (U/l/C)
  • H/L (DIM) Button
  • (DIM)
• LCD (Liquid Crystai Dispiay)
  • USA
  • INTL
  • CAN
    • WX
  • HIUO T-SCAN PUP MEMO^DUAL
• How to Use Double Function Buttons
  • DUAL
  • HOW TO USE LOWER FUNCTION
    • SELECT THE DESIRED DOUBLE FUNCTION BUTTON
  • HOW TO EXIT FROM LOWER FUNCTION
    • EXIT THE DOUBLE FUNCTION
• Receiving
  • IMPORTANT:
  • ADJUST SQUELCH
  • CAUTION
  • HOW TO SELECT THE DESIRED MODE
    • SELECT WEATHER MODE
    • SELECT INTL, CAN OR USA MODE
  • HOW TO SELECT THE DESIRED CHANNEL
• Transmitting
  • SELECT THE DESIRED MODE
  • SELECT TRANSMIT POWER
  • START TALKING
  • SELECT OPERATING CHANNEL
  • FINISH COMMUNICATION
• How to Use the Memory Function
  • STORING A MEMORY CHANNEL
    • SELECT THE DESIRE MODE AND CHANNEL
    • STORE THE CHANNEL
  • ERASING A MEMORY CHANNEL
    • SELECT THE CHANNEL TO ERASE
    • PRESS MEMORY BUTTON
    • SELECT MEMORY CHANNEL
• How to Monitor CHI 6 and Present Channel (Dual Watch)
  • 2,3 1,2
    • SELECT THE DESIRED MODE AND CHANNEL
    • START DUAL WATCH FUNCTION
    • START TALKING
    • EXIT THIS MODE
    • SELECT THE DESIRED MODE AND CHANNEL
    • CHANGE THE PROGRAMMED CHANNEL
• How to Monitor CHI 6, Present Channel and Programmed Channel (Triple Watch)
  • TRIPLE WATCH SIMULATION
  • 1,2,3
    • PROGRAM THE TRIPLE WATCH CHANNEL
    • SELECT THE DESIRED MODE AND CHANNEL
    • START TRIPLE WATCH FUNCTION
    • START TALKING
    • EXIT THIS MODE
• Scan Information
  • 1,2,4,5,6
  • 3,5
  • AUTO SCAN
    • START SCANNING
    • START TIME-SCANNING
  • TRIPLE WATCH SCAN
    • SELECT DUAL WATCH MODE
    • START SCANNING WITH DUAL WATCH MODE
    • SELECT TRIPLE WATCH MODE
    • START SCANNING WITH TRIPLE WATCH
    • MODE
• How to Display the Last Channel when turned on
  • MEMORY THE LAST CHANNEL MODE
  • RECALL CHANNEL 16 MODE
• Troubleshooting Guide
  • Problem
    • Unusual difficulty in transmitting or receiving.
  • Cause & Remedy
    • No display and no sound Is heard when the Power Switch is turned on.
    • “TX” is not displayed when the PTT Switch is pressed in transmitting mode.
    • NOTES
    • International Channels (unit; in MHz)
    • Canada Channels (unit; in MHz)
• Distress Communication Format
  • Matsushita Electric Industrial Co., Ltd.