Document Outline

• Panasonic
  • Quick Use Guide Is on the back cover.
  • Things You Should Know
  • Table of Contents
  • Important Safeguards and Precautions
    • Unpackin^^ou^VC^^Produc^eato
    • VCR and Cassette Information
      • Erase Protection (Record Tab)
      • Reset all VCR Memory Functions
      • D.S.T. (Daylight Saving Time)
      • Specifications
    • Basic Connection
      • Between Antenna and VCR
        • Case 1: Twin Lead Cable Only
        • Case 1: Screw & Plug Type Terminal
        • Case 2: Twin Lead & Coaxial Cables
        • Case 3: Two Twin Lead Cables
        • Case 3: Double Screw Type Terminal
        • Case 4: Complex TV Terminal
    • Other Connections
      • CABLE Connections
      • Without a Converter/Descrambler Box
      • With a (CABLE to VCR) Converter/Descrambler Box
      • With a (VCR to TV) Converter/Descrambler Box
      • With Two Converter/Descrambler Boxes
      • With a DSS Receiver
    • Location of Controls
      • Remote Control Buttons
    • One Time VCR Setup
      • To Set the Language, Channels, and Auto Clock
        • 3 Press CH A for English on-screen displays.
        • Or, press CH V for Spanish on-screen displays.
        • SELECT LANGUAGE
        • Or, press VCR/TV for French on-screen displays.
        • 4 Press CH A to start Channel Auto Set and Clock Auto Set.
        • CHANNEL/CLOCK AUTO SET
        • or
        • ase lj
        • (Case 2]
        • [Case 1]
          • If the displayed time is correct, press CH A to exit.
        • [Case 2)
          • If the screen above appears, auto clock set is not available in your area. Please set the clock manually as described below.
        • IMPORTANT NOTE FOR AUTO CLOCK SET
    • One Time VCR Setup
      • To Add or Delete a Channel
      • To Replace Channels in Memory
      • To Set or Reset the Clock
      • When Using the 100 key
    • ц OibScreenDisgla^
      • Function & Channel Display
      • Menu Screen
        • 1 Press ACTION to
          • display the menu.
        • 2 Press AT and ^ to
          • make your selection.
      • VCR Status & Clock Display
        • Press DISPLAY to display or remove the overlay shown below.
      • Blank Tape/ No Video Signal Indication
      • Warning and Instruction Displays
    • Playback a Tape
      • Caution:
        • 2 Press PLAY on the remote or VCR to start playback.
        • 3 Press STOP on the remote or VCR to stop playback.
        • Press STOP/EJECT on the VCR to eject the cassette.
      • To Find a Particular Scene During Playback
        • Press REW or FF during playback to search for a scene.
      • Special Effects During Playback
      • Features for a Quality Picture
    • Record On a Tape
      • Check list before you begin.
      • Insert a cassette with record tab
        • keys to select a channel.
        • Press SPEED to change the recording speed.
        • 4 Press REC/TIME on the remote control or VCR to start recording.
      • One Touch Timer Recording (OTR)
        • 5 Press STOP to stop recording.
      • Record One Program While Watching Another
      • Selecting Channels at the VCR
    • Timer Recording
      • I^Check list before you begin.
        • Press PROG* to display the program screen.
        • Press AT and ^ to select and set one of the following as the DATE:
        • Example ^8—9 31 1—2-*
      • Press AT and
        • to select and set each of the remaining items at right.
        • Press PROG to end the program.
        • 5 Press PROG to exit this mode.
        • Press POWER off to set the timer.
      • Cancel a Timer Recording:
      • Replace Program Contents:
        • 3 Press AT and ◄►to select and set replacement timer information.
      • Review or Clear Program Contents:
      • Timer Recording Using VCR Buttons
      • Channel Caption
    • b
    • d
      • Preset Caption
        • 1 Press ACTION* to display the menu.
        • Now, press AT to continue.
        • Э Follow steps 1 -3 in the above section.
        • In step 4, press AT to
        • d Press AT to select, and then press ^ to
        • r-^A-^B->C ►Z-^BLANK-*—-►&—I
      • Q'c
        • Check list before you begin.
      • Time Stamp Feature
        • 1 Press ACTION to display the menu.
        • 2 Press AT to select “SETUP FEATURE," and then press ► to
        • display the “SET UP FEATURE” screen.
        • 3 Press ► to select "ON” or "OFF."
        • Press ACTION twice to exit.
      • Blue Back ON/OFF Feature
        • 3 Press ACTION to display the menu.
        • b Press AT to select “SET UP VCR,” and then press ► to
        • display the "SET UP VCR” screen.
        • Press AT to select “NOISY CH
        • BLUE BACK,” and then press ►
          • to select “ON” or “OFF.”
        • Press ACTION twice to exit.
      • SpeciaTVC^Teature^(contin^^
        • [N^Check list before you begin.
        • VCR Lock Feature
          • To Cancel the VCR Lock feature,
        • Warning Beeper Feature
      • !( <ì b Л Таре Operation
        • Repeat Play
          • PLAY,” and then press ► to
        • One Minute Skip
        • Zero Search
          • b Press COUNTER RESET
          • C Continue playback, rewind, or fast forward.
        • Direct Access
          • (For normal and/or timer recordings)
            • 1 Press INDEX* to display the
            • “SELECT SEARCH MODE" screen.
            • 2 Press to select “INDEX
            • SEARCH," and then press ^
              • to display the “INDEX” screen.
            • 3 Press a NUMBERED key to
              • select the desired recording.
              • 4 Press REW or FF to start a reverse
              • or fonward search.
            • To calculate the Index Number
        • Program Index Search
          • (For timer recordings only)
        • Index Scan
          • (For normal and/or timer recordings)
            • b Press AT to select “INDEX SEARCH," and then press ►
      • ToHIWl MTS Broadcast/VHS Hi-Fi Stereo System
        • [^3 Check list before you begin.
        • Connections to Make
        • Receivable Broadcast Types
          • Press DISPLAY to display the broadcast signal currently being received.
          • With the proper audio mode setting, your VCR can:
        • Audio Mode for Recording
          • 1 Press SAP/Hi-FI repeatedly
            • (each press within 5 seconds) to select the desired audio mode (STEREO, SAP, or MONO).
          • 2 Do a recording.
            • See the “Record On a Tape” section on page 17.
        • Audio Mode for Playback
          • a Playback the tape.
            • See the “Playback a Tape” section on page 16.
          • Press SAP/Hi-Fi repeatedly
            • (each press within 5 seconds) to select the desired audio mode (HIFl or NORMAL).
      • Multi-Brand Control Feature
        • Using the Multi-Brand Control
          • Press VCR or TV or DSS/CABLE on the remote control to select the desired mode.
          • NQIE;
          • VCR
          • DSS/CABLE
          • IV
      • \LM\_ " lgg Cog^mgYourT^ges^ub^^
        • Connections you’ll need to make.
          • 3 Select “LINE” Input mode on the
        • To Monitor Dubbing on Your TV
        • Selecting the Input Mode
      • Before Requesting Service
      • Service Center List
        • Service in Puerto Rico
        • Customer Orders Only 800-211-PANA (7262)
      • Warranty
        • PANASONIC Video Products
          • Limited Warranty
      • Spanish Quick Use Guide/Guia para rápida consulta
        • Para fijar el idioma , canal y reloj
        • [Caso 1]
        • [Caso 2)
        • [Caso 1)
        • [Caso 2)
        • Para fijar o fijar de nuevo el reloj
        • Operaciones básicas para la reproducción
        • Para buscar una escena en particular
        • durante la reproducción
        • Programación fácil para la grabación con temporlzador
        • Operaciones básicas para la grabación.
          • Grabación de un toque (OTR) ^
          • Clock Reset (page 13)
          • Playback a Tape (page 16)
          • Make a Recording (page 17)
          • Set a Timer Recording (page 18)