Document Outline

• Operation Manual Mode d’emploi
  • Before You Start
  • 0 What’s What
  • 0 Power ON/OFF
  • To establish a safe level:
  • Decibel
  • THE FOLLOWING NOISES CAN BE DANGEROUS UNDER CONSTANT EXPOSURE
  • Notes
  • ((( XAA »)
    • Notes
    • • Press RESET on the head unit with a pen tip or other pointed instrument.
    • 1 Press OPEN to open the front panel.
    • 2 Slide and remove the front panel toward you.
    • 3 Put the front panel into the protective case provided for safe keeping.
    • 1 Make sure the inner cover is closed.
    • 2 Replace the front panel by clipping it into place.
• J C
  • m
  • (D EQ button
  • (D SOURCE button
  • © PAUSE button
  • ® CLOCK button
  • ® OPEN button
  • @ A/T/^/^ buttons
  • ® BAND button
  • ® 1-6 buttons
  • ® VOLUME
  • dJ ENTERTAINMENT button
  • ® AUDIO button
  • ® FUNCTION button
  • ® DISPLAY button
  • ^ VOLUME button
  • ^ CD button
  • D PAUSE button
  • ^ TUNER button
  • ^ ATT button
  • • Press SOURCE to turn the unit on.
  • • When using the head unit, press SOURCE to select a source.
  • • Press SOURCE and hold until the unit turns off.®
  • • When using the remote control, press TUNER or CD to select a source.
  • Notes
  • ® Stereo (ST) indicator
  • ® LOG indicator
  • (3) Band indicator
  • ® Preset number indicator
  • (5) Frequency indicator
  • 1 Press SOURCE to select the tuner.
  • 2 Use VOLUME to adjust the sound level.
  • 3 Press BAND to select a band.
  • 4 To perform manual tuning, press ◄ or ^ with quick presses.
  • 5 To perform seek tuning, press and hold
  • © Function display
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to display the function names.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Local.
  • 3 Press A to turn local seek tuning on.
  • 4 Press ◄ or ► to set the sensitivity.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select BSM.
  • 3 Press A to turn BSM on.
  • Note
  • ® Track number indicator
  • ® Play time indicator
  • 1 Press EJECT.
  • 2 Insert a CD into the CD loading slot.
  • 3 Use VOLUME to adjust the sound level.
  • 4 To perform fast forward or reverse, press and hold ◄ or ►.
  • 5 To skip back or forward to another track, press ◄ or ►.
  • 4 Press T to turn repeat play off. ? :
  • ® Function display
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to display the function names.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Repeat.
  • 3 Press A to turn repeat play on.
  • 1 Press OPEN to open the front panel.
  • 1 Press OPEN to open the front panel.
  • 7 Move the cursor to the last position by pressing >■ after entering the title.
  • 8 Press BAND to return to the playback display.
  • Notes
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY.
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY.
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY and hold until the title begins to scroll to the left.
  • ® MP3/WMA indicator
  • ® Folder number indicator
  • @ Play time indicator
  • (4) Track number indicator
  • 1 Press EJECT.
  • 2 Insert a CD-ROM into the CD loading slot.
  • 3 Use VOLUME to adjust the sound level.
  • 4 Press A or T to select a folder.
  • 5 To perform fast forward or reverse, press and hold < or
  • 6 To skip back or forward to another track, press ◄ or ►.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Repeat.
  • 3 Press -4 or P- to select the repeat range.
  • Notes
  • 1 Select the repeat range.
  • 2 Press OPEN to open the front panel.
  • 1 Select the repeat range.
  • 2 Press OPEN to open the front panel.
  • 3 Press FUNCTION to select Scan.
  • 4 Press ▲ to turn scan play on.
  • 5 When you find the desired track (or folder) press T to turn scan play off.
  • Note
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Pause.
  • 3 Press ▲ to turn pause on.
  • 4 Press T to turn pause off.
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY.
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY and hold until the text information begins to scroll to the left.
  • © Disc number indicator
  • ® Play time indicator
  • @ Track number indicator
  • 1 Press SOURCE to select the multi-CD player.
  • 2 Use VOLUME to adjust the sound level.
  • 3 Select a disc you want to listen to with the 1-6 buttons.
  • 4 To perform fast forward or reverse, press and hold ◄ or ►.
  • 5 To skip back or forward to another track, press ◄ or ►.
  • © Function display
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to display the function names.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Repeat.
  • 3 Press ◄ or ► to select the repeat range.
  • Notes
  • 1 Select the repeat range.
  • 2 Press OPEN to open the front panel.
  • 1 Select the repeat range.
  • 2 Press OPEN to open the front panel.
  • 3 Press FUNCTION to select Scan.
  • 4 Press ▲ to turn scan play on.
  • 5 When you find the desired track (or disc) press T to turn scan play off.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Pause.
  • 3 Press ▲ to turn pause on.
  • 4 Press T to turn pause off.
  • 1 Play a CD that you want to program.
  • 2 Press OPEN to open the front panel.
  • 8 Press BAND to return to the playback display.
  • Notes
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY.
  • 1 Press OPEN to open the front panel.
  • 3 Press -4 or ► to scroll through the list of titles that have been entered.
  • 4 Press A to play your favorite CD title.
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY.
  • 1 Press OPEN to open the front panel.
  • 2 Press DISPLAY and hold until the title begins to scroll to the left.
  • 3 Press A or T to select your favorite setting.
  • 1 Press OPEN to open the front panel.
  • 2 Press FUNCTION to select Comp.
  • (D Audio display
  • (D Preset equalizer indicator
  • d) ASL indicator
  • 1 Press OPEN to open the front panel.
  • 2 Press AUDIO to display the audio function names.
  • Note
  • 1 Press EQ and hold until SFEQ appears in the display.
  • 2 Press EQ to select the desired SFEQ setting.
  • 3 Press -4 or to select the desired position.
  • 1 Press OPEN to open the front panel.
  • 2 Press AUDIO to select Fad.
  • 3 Press A or T to adjust front/rear speaker balance.
  • 4 Press -4 or P- to adjust left/right speaker balance.
  • (M)
    • 2N—IN—1W—2W
    • Note
    • 1 Press OPEN to open the front panel.
    • 2 Press AUDIO to select Bass.
    • 3 Press ◄ or ► to select the desired frequency.
    • 40—63—100—160 (Hz)
    • 4 Press A or T to adjust the bass level.
    • 1 Press OPEN to open the front panel.
    • 2 Press AU DIO to select Treble.
    • 3 Press ◄ or ► to select the desired frequency.
    • 2.5k—4k—6.3k—10k (Hz)
    • 4 Press A or T to adjust the treble level.
    • 1 Press OPEN to open the front panel.
    • 2 Press AUDIO to select Loud.
    • 3 Press A to turn loudness on.
    • 4 Press -4 or P- to select a desired level.
    • 5 Press T to turn loudness off.
    • 1 Press OPEN to open the front panel.
    • 4 Press A or T to adjust the output level of the subwoofer.
    • 2 Press AUDIO to select Sub-WI.
    • 4 Press -4 or P- to select the phase of subwoofer output.
    • 1 Press OPEN to open the front panel.
    • 2 Press AUDIO to select non fading output on/off setting.
    • 1 Press OPEN to open the front panei.
    • 2 Press AUDIO to select Sub-W2.
    • 3 Press ◄ or ► to select cut-off frequency.
    • 1 Press OPEN to open the front panel.
    • 2 Press AUDIO to select non fading output setting.
    • 3 Press A or T to adjust the output level of the non fading.
    • 1 Press OPEN to open the front panel.
    • 2 Press AUDIO to select HPF.
    • 3 Press A to turn high pass filter on.
    • 4 Press ◄ or ► to select cut-off frequency.
    • 50—80—125 (Hz)
    • Note
    • 1 Compare the FM tuner volume level with the level of the source you wish to adjust.
    • 2 Press OPEN to open the front panel.
    • 3 Press AUDIO to select SLA.
    • 4 Press A or T to adjust the source volume.
    • Notes
  • (M)
    • 1 Press OPEN to open the front panel.
    • 2 Press AU DIO to select ASL.
    • 3 Press A to turn ASL on.
    • 4 Press -4 or ► to select the desired ASL level.
    • © Function display
    • 1 Press SOURCE and hold until the unit turns off.
    • 2 Press OPEN to open the front panel.
    • 3 Press FUNCTION and hold until the clock appears in the display.
    • 4 Press FUNCTION to select one of the initial settings.
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select clock.
    • 3 Press ◄ or ► to select the segment of the clock display you wish to set.
    • 4 Press A or T to set the clock.
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select Warning.
    • 3 Press A or ▼ to turn Warning on or off.
    • 1 Press OPEN to open the front panel.
    • 3 Press A or T to turn Flap Auto on or off.
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select AUX.
    • 3 Press A or T to turn AUX on or off.
    • AUX:ON) a
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select Dimmer.
    • 3 Press A or T to turn Dimmer on or off.
    • 1 Press OPEN to open the front panel.
    • 3 Press ◄ or ► to adjust the brightness ievel.
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select Rear SP.
    • 3 Press A or T to switch the rear output setting.
    • 4 Press ◄ or ► to switch the subwoofer output or non fading output.
    • Notes
    • 1 Press OPEN to open the front panel.
    • 3 Press -4 or ► to switch the telephone muting/attenuation.
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select Motion.
    • 3 Press A or T to turn Motion on or off.
    • • Press CLOCK to turn the clock display on or off.
    • Notes
    • • Press SOURCE to select AUX as the source.
    • 1 Press OPEN to open the front panel.
    • 2 Press ENTERTAINMENT.
    • 1 Press OPEN to open the front panel.
    • 3 Press 1 numbered button to select the desired character type.
    • 4 Press A or T to select a letter of the alphabet.
    • 5 Press ► to move the cursor to the next character position.
    • 6 Move the cursor to the last position by pressing ► after entering the title.
    • 7 Press BAND to return to the playback display. 0
    • ® EXTR indicator
    • @ TEXT indicator
    • @ A (NNC) indicator
    • (4) W (THR) indicator
    • (D News indicator
    • i) Traffic indicator
    • 1 Press OPEN to open the front panel.
    • 2 Press DISPLAY.
    • Note
    • Notes
    • 1 Press OPEN to open the front panel.
    • 2 Press FUNCTION to select program type selection (PTY).
    • 3 Press -4 or P- to select a program type.
    • 4 Press A to begin the search.
    • Notes
    • 1 Press PAUSE and hold to display dynamic label.
    • 2 Press ◄ or ► to recall the three most recent dynamic label.
    • 3 Press ▼ to scroll the dynamic label.
    • 1 Display the dynamic label you want to store in memory.
    • 2 Press any of 1-6 and hold to store the selected dynamic label.
    • d) XM channel number indicator
    • ® XM band indicator
    • • Press CLOCK and hold to select the desired channel select setting.
  • (M)
    • AM tuner
    • Note
    • PIONEER CORPORATION
    • Reverse mode
    • Feature DEMO
    • Motion DEMO
    • Notes
    • Modo de retroceso
    • Demostración de características
    • Demostración de película
    • Notas
    • <KSNNX/01K00001>
• DEH-P8500MP
  • Note:
  • Note:
  • 1. Remove the frame. (Fig. 9)
  • 2. Fastening the unit to the factory radio mounting bracket.
  • (Fig. 10) (Fig. 11)
  • LIMITED WARRANTY