Document Outline

• Start Here
  • ProLinx Reference Guide
  • Install ProSoft Configuration Builder Software
    • Using the Online Help
    • To Create Optional Comment Entries
    • Printing a Configuration File
• Configure the Gateway
  • IEC 60870-5-104 Server section
    • [SNTP CLIENT]
      • NTP Server IP Address
      • Time Zone
      • Use Daylight Savings Time
      • Database Register
    • [IEC-870-5-104]
      • Use IP List
      • Override StartDT
      • Clear Queue on Close
      • t1 Timeout Set Value
      • t2 Timeout Set Value
      • t3 Timeout Set Value
      • k (maximum queue)
      • w (latest ack threshold)
      • Common Address of ASDU
      • Cyclic Data Transmission
      • Select/Operate Timeout
      • Use ACTTERM with Setpoint
      • Use ACTTERM with Step
      • Time DB Offset
      • Command Delay Timer
      • Maximum ASDU Resp Len
      • Freeze Start Type
      • Interval for Freeze
      • Set Priority Queues
      • Cyclic Set IV Time
      • IV Check Delay Time
      • IV Fail Count
      • Event Scan Delay
      • Scan Events
      • Time Type
    • [IEC-870-5-104 Database]
      • Short Pulse Time
      • Long Pulse Time
      • Point Count
      • Sequence Flag
      • Parameter Offset
    • [IEC-870-5-104 IP Addresses]
    • [M_SP_NA_1 104]
    • [M_DP_NA_1 104]
    • [M_ST_NA_1 104]
    • [M_ME_NA_1 104]
    • [M_ME_NB_1 104]
    • [M_ME_NC_1 104]
    • [M_IT_NA_1 104]
    • [C_SC_NA_1 104]
    • [C_DC_NA_1 104]
    • [C_RC_NA_1 104]
    • [C_SE_NA_1 104]
    • [C_SE_NB_1 104]
    • [C_SE_NC_1 104]
    • Group Codes
  • CommonNet Data Map
    • From Address
    • To Address
    • Register Count
    • Swap Code
    • Delay Preset
  • Downloading a File from PC to the gateway
• IEC-60870-5-104 (104S) Protocol Implementation
  • Module Address
    • IP Address
    • Common ASDU Address
  • Monitor Direction and Control Direction: Point Definition
  • Using Monitor Points
    • Monitor Data Transfer
    • Monitor Points Addressing
      • M_SP_NA
      • M_ST_NA
      • M_ME_NA and M_ME_NB
      • M_ME_NC and M_IT_NA
  • Using Control (Command) Points
    • Control Data Transfer
    • Command Points Addressing
      • C_SC_NA and C_DC_NA
      • C_RC_NA
      • C_SE_NA and C_SE_NB
      • C_SE_NC
  • Data Communication
    • Group Communication
    • STARTDT & STOPDT
    • TESTFR Requests
  • Events
    • Deadbands
      • M_ME_NA
      • M_ME_NB
      • M_ME_NC
    • Controlling the Generation of Events
      • General (All Points)
      • Data Type Level
      • Point Level
    • Time Information
    • Invalid Bit Monitoring
    • Event Priority
    • SNTP Support
  • Sequence Flag
• Diagnostics and Troubleshooting
  • The Configuration/Debug Menu
    • Required Hardware
    • Using the Diagnostic Window in ProSoft Configuration Builder
    • Navigation
      • Keystrokes
      • Redisplaying the Menu
      • Viewing Module Configuration
      • Opening the Database Menu
      • Opening the IEC-870-5-104 Server Menu
      • Viewing SNTP Status
      • Receiving the Configuration File
      • Sending the Configuration File
      • Viewing Version Information
      • Resetting diagnostic data
      • Warm Booting the Module
      • Exiting the Program
    • Database View Menu
      • Viewing Register Pages
      • Displaying the Current Page of Registers Again
      • Moving Back Through 5 Pages of Registers
      • Moving Forward Through 5 Pages of Registers
      • Viewing the Previous 100 Registers of Data
      • Viewing the Next 100 Registers of Data
      • Viewing Data in Decimal Format
      • Viewing Data in Hexadecimal Format
      • Viewing Data in Floating Point Format
      • Viewing Data in ASCII (Text) Format
      • Returning to the Main Menu
    • IEC-870-5-104 Server Menu
      • IEC-870-5-104 Configuration Menu
      • IEC-870-5-104 Status Data
      • Lists of Valid Hosts
      • Point Setup
      • Database Configuration
    • Network Menu
      • Transferring WATTCP.CFG to the gateway
      • Transferring WATTCP.CFG to the PC
      • Viewing the WATTCP.CFG file on the gateway
      • Returning to the Main Menu
  • LED Indicators
    • Ethernet LED Indicators
• Reference
  • Product Specifications
    • General Specifications
    • Internal Database
      • Application Data Area
      • Status Data Area
      • Optional Web Server for Ethernet Solutions
    • Hardware Specifications
    • Port Physical and Protocol Specifications
      • 104 Server Specifications
        • Driver Protocol Specifications
        • Server Functional Specifications
  • Command Block Functionality
    • Introduction
    • Configuration
      • General Command Block Structure
    • Command Block List
      • Example 1 - Command Request Without Response only
        • Command Request Block
        • Command Response Block
        • Command Request Block
        • Command Response Block
      • Example 2 - Command Request with Response Only
        • Command Request Block
        • Command Response Block
        • Command Request Block
        • Command Response Block
      • Example 3 - Command Request with Response and Command Request Without Response
        • Command Request Block
        • Command Response Block
        • Command Request Block
        • Command Response Block
    • Event Data Command Block
      • Request Block
    • Set Time Command Block
      • Request Block
    • Get Time Command Block
      • Request Block
      • Response Block
    • Get Event Buffer Sizes Command Block
  • SNTP Support
    • SNTP Status Data
  • Server Error and Status Data
  • Command Qualifiers
  • Parameter Qualifiers
  • IEC 60870-5-104 Server Interoperability Document
    • System or device
    • Application Layer
      • Transmission mode for application data
      • Common Address of ASDU
      • Information object address
      • Cause of transmission
      • Length of APDU
    • Selection of standard ASDUs
      • Process information in monitor direction
      • Process information in control direction
      • System information in monitor direction
      • System information in control direction
      • Parameter in control direction
      • File transfer
    • Type identifier and cause of transmission assignments
    • Basic Application Functions
      • Station initialization
      • Cyclic data transmission
      • Read procedure
      • Spontaneous transmission
      • Double transmission of information objects with cause of transmission spontaneous
      • Station Interrogation
      • Clock synchronization
      • Command transmission
      • Transmission of Integrated totals
      • Parameter loading
      • Parameter activation
      • Test procedure
      • File transfer
      • File transfer in control direction
      • Background scan
      • Definition of time outs
      • Maximum number of outstanding I format APDUs k and latest acknowledge APDUs (w)
      • Port number
      • RFC 2200 suite
  • 104S v2 Database Design Forms
    • M_SP_NA_1, M_DP_NA_1, M_ST_NA_1 and M_IT_NA_1 Form
    • M_ME_NA_1 and M_ME_NB_1 Form
    • Form for all C_ (Command) data types, except C_RC_NA_1
    • C_RC_NA_1 Form
• Support, Service & Warranty
  • How to Contact Us: Technical Support
  • Return Material Authorization (RMA) Policies and Conditions
    • All Product Returns:
    • Procedures for Return of Units Under Warranty:
    • Procedures for Return of Units Out of Warranty:
  • LIMITED WARRANTY
    • What Is Covered By This Warranty
    • What Is Not Covered By This Warranty
    • Disclaimer Regarding High Risk Activities
    • Intellectual Property Indemnity
    • Disclaimer of all Other Warranties
    • Limitation of Remedies **
    • Time Limit for Bringing Suit
    • No Other Warranties
    • Allocation of Risks
    • Controlling Law and Severability