Document Outline

• Easy Script in Python
• Contents
• 1 Easy Script Extension - Python interpreter
  • 1.1 Overview
  • 1.2 Python 1.5.2+ Copyright Notice
  • 1.3 Python installation
  • 1.4 Python implementation description
  • 1.5 Introduction to Python
    • 1.5.1 Data types
    • 1.5.2 Operators
    • 1.5.3 Compound statements
    • 1.5.4 Conditional execution
    • 1.5.5 Loops
    • 1.5.6 Resources
  • 1.6 Python core supported features
• 2 Python Build-in Custom Modules
  • 2.1 CMUX and Python
  • 2.2 MDM built-in module
    • 2.2.1 MDM.send(string, timeout)
    • 2.2.2 MDM.receive(timeout)
    • 2.2.3 MDM.read()
    • 2.2.4 MDM.sendbyte(byte, timeout)
    • 2.2.5 MDM.receivebyte(timeout)
    • 2.2.6 MDM.readbyte()
    • 2.2.7 MDM.getDCD()
    • 2.2.8 MDM.getCTS()
    • 2.2.9 MDM.getDSR()
    • 2.2.10 MDM.getRI()
    • 2.2.11 MDM.setRTS(RTS_value)
    • 2.2.12 MDM.setDTR(DTR_value)
  • 2.3 MDM2 built-in module
    • 2.3.1 MDM2.send(string, timeout)
    • 2.3.2 MDM2.receive(timeout)
    • 2.3.3 MDM2.read()
    • 2.3.4 MDM2.sendbyte(byte, timeout)
    • 2.3.5 MDM2.receivebyte(timeout)
    • 2.3.6 MDM2.readbyte()
    • 2.3.7 MDM2.getDCD()
    • 2.3.8 MDM2.getCTS()
    • 2.3.9 MDM2.getDSR()
    • 2.3.10 MDM2.getRI()
    • 2.3.11 MDM2.setRTS(RTS_value)
    • 2.3.12 MDM2.setDTR(DTR_value)
  • 2.4 SER built-in module
    • 2.4.1 SER.send(string)
    • 2.4.2 SER.receive(timeout)
    • 2.4.3 SER.read()
    • 2.4.4 SER.sendbyte(byte)
    • 2.4.5 SER.receivebyte(timeout)
    • 2.4.6 SER.readbyte()
    • 2.4.7 SER.set_speed(speed, <char format>)
    • 2.4.8 SER.setDCD(DCD_value)
    • 2.4.9 SER.setCTS(CTS_value)
    • 2.4.10 SER.setDSR(DSR_value)
    • 2.4.11 SER.setRI(RI_value)
    • 2.4.12 SER.getRTS()
    • 2.4.13 SER.getDTR()
  • 2.5 SER2 built-in module
    • 2.5.1 SER2.send(string)
    • 2.5.2 SER2.receive(timeout)
    • 2.5.3 SER2.read()
    • 2.5.4 SER2.sendbyte(byte)
    • 2.5.5 SER2.receivebyte(timeout)
    • 2.5.6 SER2.readbyte()
    • 2.5.7 SER2.set_speed(speed, <format>)
  • 2.6 GPIO built-in module
    • 2.6.1 GPIO.setIOvalue(GPIOnumber, value)
    • 2.6.2 GPIO.getIOvalue(GPIOnumber)
    • 2.6.3 GPIO.setIOdir(GPIOnumber, value, direction)
    • 2.6.4 GPIO.getIOdir(GPIOnumber)
    • 2.6.5 GPIO.getADC(adcNumber)
    • 2.6.6 GPIO.setDAC(enable, value)8
    • 2.6.7 GPIO.setVAUX(vauxNumber, enable)8
    • 2.6.8 GPIO.getAXE()9
    • 2.6.9 GPIO.setSLED(status, onDuration, offDuration)
    • 2.6.10 GPIO.getCBC()9
  • 2.7 MOD built-in module
    • 2.7.1 MOD.secCounter()
    • 2.7.2 MOD.sleep(sleeptime)
    • 2.7.3 MOD.watchdogEnable(timeout)
    • 2.7.4 MOD.watchdogReset()11
    • 2.7.5 MOD.watchdogDisable()11
    • 2.7.6 MOD.powerSaving(timeout) 11
    • 2.7.7 MOD.powerSavingExitCause()11
  • 2.8 IIC built-in module
    • 2.8.1 IIC.new(SDA_pin, SCL_pin, <ADDR>)
    • 2.8.2 IIC object method: init()
    • 2.8.3 IIC object method: readwrite(string, read_len)
    • 2.8.4 IIC object method: sendbyte(byte)
    • 2.8.5 IIC object method: send(string)
    • 2.8.6 IIC object method: dev_read(addr, len)
    • 2.8.7 IIC object method: dev_write(addr, string)
    • 2.8.8 IIC object method: dev_gen_read(addr, start, len)
    • 2.8.9 IIC object method: dev_gen_write(addr, start, string)
  • 2.9 SPI built-in module
    • 2.9.1 SPI.new(SCLK_pin, MOSI_pin, MISO_pin, <SS0>, <SS1>,…<SS7>)
    • 2.9.2 SPI object method: init (CPOL, CPHA, <SSPOL>, <SS>)
    • 2.9.3 SPI object method: readwrite(string, <read_len>, <SS>)
    • 2.9.4 SPI object method: sendbyte(byte, <SS_number>)
    • 2.9.5 SPI object method: readbyte(<SS_number>)
    • 2.9.6 SPI object method: send(string, <SS_number>)
    • 2.9.7 SPI object method: read(len, <SS_number>)
  • 2.10 GPS built-in module
    • 2.10.1 GPS. powerOnOff(newStatus)
    • 2.10.2 GPS.getPowerOnOff()
    • 2.10.3 GPS.resetMode(mode)
    • 2.10.4 GPS.getAntennaVoltage()
    • 2.10.5 GPS.getAntennaCurrent()
    • 2.10.6 GPS.getActualPosition()
    • 2.10.7 GPS.powerSavingMode(mode, pushToFixPeriod)
    • 2.10.8 GPS.powerSavingWakeUp()
    • 2.10.9 GPS.getLastGGA()
    • 2.10.10 GPS.getLastGLL()
    • 2.10.11 GPS.getLastGSA()
    • 2.10.12 GPS.getLastGSV()
    • 2.10.13 GPS.getLastRMC()
    • 2.10.14 GPS.getLastVTG()
    • 2.10.15 GPS.getPosition()
• 3 Python Script Operations
  • 3.1 Executing a Python script
    • 3.1.1 Write Python script
    • 3.1.2 Download Python script
    • 3.1.3 Enable Python script
    • 3.1.4 Execute Python script
    • 3.1.5 Reading Python script
    • 3.1.6 List saved Python scripts
    • 3.1.7 Deleting Python script
    • 3.1.8 Restart Python script
  • 3.2 Run AT Interface and Python at the same time
  • 3.3 Debug Python script
    • 3.3.1 Debug Python script on GPS modules using SSC bus
      • 3.3.1.1 Installation of the drivers
      • 3.3.1.2 Debugging process
    • 3.3.2 Debug Python script on GPS modules using CMUX
      • 3.3.2.1 Installation
      • 3.3.2.2 Debugging process
• 4 Python standard functions
  • 4.1 Technical characteristics
    • 4.1.1 General
  • 4.2 Python supported features
    • 4.2.1 Operators, statements, functions
    • 4.2.2 Truth Value Testing
    • 4.2.3 Boolean Operations
    • 4.2.4 Comparisons
    • 4.2.5 Numeric Types: Integers
    • 4.2.6 Numeric Types: Long Integers
    • 4.2.7 Numeric Types: Float
    • 4.2.8 Numeric Types: Complex
    • 4.2.9 Sequence Types: Strings
    • 4.2.10 Sequence Types: Tuples
    • 4.2.11 Sequence Types: Lists
    • 4.2.12 Mapping Types: Dictionaries
    • 4.2.13 Other Built-in Types: File Objects
    • 4.2.14 Other Built-in Types: Modules
    • 4.2.15 Other Built-in Types: Classes
    • 4.2.16 Other Built-in Types: Functions
    • 4.2.17 Other Built-in Types: Methods
    • 4.2.18 Other Built-in Types: Type Objects
    • 4.2.19 Other Built-in Types: Null Object
    • 4.2.20 Other Built-in Types: Ellipsis Object
    • 4.2.21 Other Built-in Types: Buffer Objects
    • 4.2.22 Other Built-in Types: Range Objects
    • 4.2.23 Other Built-in Internal Types: Code Objects
    • 4.2.24 Other Built-in Internal Types: Frame Objects
    • 4.2.25 Other Built-in Internal Types: Traceback Objects
    • 4.2.26 Other Built-in Internal Types: Slice Objects
    • 4.2.27 Built-in Exceptions
    • 4.2.28 Built-in Functions
    • 4.2.29 Built-in Modules: marshal
    • 4.2.30 Built-in Modules: imp
    • 4.2.31 Built-in Modules: __main__
    • 4.2.32 Built-in Modules: __builtin__
    • 4.2.33 Built-in Modules: sys
    • 4.2.34 Built-in Modules: md5
    • 4.2.35 Library Modules
• 5 Python notes
  • 5.1 Memory Limits
  • 5.2 Other Limits
• 6 List of acronyms