Document Outline

• Section 1 – Getting Acquainted
  • XPS-ProMail System
  • XPS-ProMail Base Control Panel
  • XPS-ProMail 3.0/4.0 Printer Control Panel
  • XPS-ProDry 8.0
  • TB-659 Conveyor
• XPS-ProMail 3.0/4.0 Printer – This unit prints the information onto the media.
  • LAMP HEIGHT ADJUSTMENT KNOBS - Used to raise/lower the height of the dryer above the media.
• Section 2 – Setting up the System
  • Feeder Setup
    • Positioning the Feeder:
    • Feeder Interface:
    • Feeder Activation Control Conditions:
    • Speed Control:
  • XPS-ProMail Base and Printer Setup
    • Side Guide and Belt Positioning:
    • Adjusting the Dryer’s Media Hold-Down Guides
    • Installing the Ink Cartridges
      • Ink Level Monitor Reset
    • Printer’s Power Switch and Fuse Locations
    • Adjusting the Horizontal Print Position
    • Adjusting the Vertical Print Position
    • Head Layouts:
  • XPS-ProDry 8.0 Setup
    • DRYER HAZARDS:
    • Emergency Stop Control:
    • Lamp Intensity Adjustment:
    • Dryer Lamp Power Switch:
    • Positioning the Dryer Over the Media:
    • In Case of a Jam:
    • In Case of a Fire:
    • Dryer Lamp Control Process:
    • Lamp Activation Control Conditions:
    • Positioning Media on Dryer Belts
    • Positioning the Exit Rollers:
  • TB-659 Conveyor Setup
    • Height Adjust:
    • Power:
    • Emergency Stop Control:
    • Speed Control:
    • Conveyor Position:
    • Paper Stop Adjustment:
    • Belt Position Adjustment:
    • Clearing Accumulated Media:
  • Paper Feed (Media Transport) Test
  • TEST Print
    • Customizing the TEST Print Image:
• Section 3 – Operating the System
  • Installing the Printer Drivers onto the Computer
    • Connecting the Printer to the Computer
  • Software Setup Example
    • Printing from Satori Bulk Mailer® 5.0
  • Using Inkjet Suitable Media
    • Choosing a Suitable Ink Type for the Media:
  • Printer Control Panel & MENU Features
  • Operation Sequence Example
  • Clearing (purging) the Ink Cartridge Nozzles
    • Printing a Test Print
  • Print Recovery after a Jam
    • How to Cancel a Print Job:
• Section 4 – Maintenance
  • Inkjet Cartridge Maintenance
    • Replacing the Inkjet Cartridge:
    • Cleaning the Inkjet Cartridge (Printhead)
    • Purging the Nozzles
    • Inkjet Cartridge Storage
    • Inkjet Cartridge Disposal
  • Jams in the Printer
    • Removing Jammed Media
  • Cleaning
    • Media Transport Belts
    • Cleaning the Sensors
    • Cleaning the Dryer & Dryer Lamps
• Section 5 – Troubleshooting Guide
  • Printer Display Messages
  • Print Image Issues
  • Print Content Incorrect
  • Print Placement Issues
  • Printer and Printer Base Issues
  • Interface Communication Issues
  • LCD Display Issues
  • Feeding Issues
  • Power Issues
• MESSAGE
• MESSAGE
• CONDITION
• CONDITION
• CONDITION
• CONDITION
• Appendix A – Technical Specifications
  • XPS-ProMail System
  • XPS-ProMail 3.0/4.0 Printer
• XPS-ProMail Base: 43” W x 35” D x 51” H base only
  • PRINT TECHNOLOGY
  • PRINT QUALITY
• 300 dpi 200 x 600 dpi
  • IMAGE AREA
  • PRINT ORIENTATION
• Normal and Reverse
• Minimum: 3” W x 5” L
• 20 # Bond up to 3/8” (0.375”)
• One job counter and one lifetime counter
• 11” H x 14” W x 28” D
• Appendix B – Supplies, Service & Support
  • Supplies
    • Ink Cartridges:
  • Obtaining Supplies, Service and Support
• HP 51645A
• C6195A
• C6173A
• C6168A
• C6169A
• C6170A
• C8842A
• C8715A
• C9050A
• Appendix C – Optional Accessories
  • XPS-ProFeed Shuttle Feeder
  • EasyFeed 120/200 Feeder
  • XPS-ProStand
  • Conveyor Options
    • Drop/Catch Tray
    • Dryer for TB-659
    • TB-690, TB-690S1 and TB-690S2
  • XPS-ProDry 8.0
  • XPS-ProTab 4.0
• INDEX