Document Outline

• Introduction
  • Features of the SpeedStream® Router
    • Network (LAN) Features
    • Security Features
    • Configuration & Management
    • Advanced Router Functions
  • Minimum System Requirements
  • General Safety Guidelines
• Physical Installation
  • Minimum System Requirements
  • Hardware Installation
    • Basic Installation Procedure
    • Installing Line Filters
      • In-Line Filter
        • Wall-Mount Filter
    • Connecting Cables
      • Ethernet Installation Method
        • 1. Connect the Ethernet cable(s)
          • 2. Connect the DSL cable
          • 3. Connect the power
          • 4. Check the LEDs
      • USB Installation Method (Microsoft Windows)
        • 1. Connect the USB Cable
          • 2. Connect the DSL Cable
          • 3. Connect the Power
          • 4. Install USB Driver Software
          • 5. Check the LEDs
      • USB Driver Installation (Macintosh Systems)
• Operating System Configuration
  • Check TCP/IP Protocol Settings
    • Checking TCP/IP Settings (Windows 9x/ME)
    • Checking TCP/IP Settings (Windows 2000)
    • Checking TCP/IP Settings (Windows XP)
    • Checking TCP/IP Settings (MAC OS 8.6 through 9.x)
    • Checking TCP/IP Settings (MAC OSX)
  • Internet Access Configuration
    • For Windows 9x/2000
    • For Windows XP
• SpeedStream Router Setup
  • Before Configuring the Router
  • Connecting to the Router
    • Selecting PPP Connection
    • PPP Login
  • Home Window
• Configuring User Profiles
  • Add User Profiles
  • Editing User Profiles
  • Deleting User Profiles
• Configuring ISP Connection Settings
  • WAN Interface
  • Host
  • DHCP
  • Static Routes
  • RFC2684
• Configuring Network Settings
  • RIP (Routing Information Protocol)
    • Port Forwarding
    • UPnP (Universal Plug and Play)
    • Bridge Mode
    • Server Ports
    • Dynamic DNS
• Configuring Security Features
  • Admin User
  • Time Client
  • NAT/NAPT Server
  • Firewall
    • Level
    • Snooze
    • DMZ
    • Filter Rules
      • Creating Custom IP Filter Rules
      • TCP/UDP Options Window
      • ICMP Options Window
      • Clone IP Filter Rules
  • Log
  • ADS
• Monitoring Router Health
  • Status and Statistics
    • System Summary
    • System Log
      • ATM Statistics
        • DSL Statistics
          • Ethernet Statistics
          • USB Statistics
          • Routes
  • Diagnostics
  • Tools
    • Interface Map
    • Reboot
      • Reset to system defaults:
        • To cancel the reset:
    • Update
• Troubleshooting
  • Basic Troubleshooting Steps
  • Interpreting the LED Display
  • Resolving Specific Issues
    • pwr LED Not Lit
      • dsl LED Not Lit
        • enet LED Not Lit
        • USB LED Not Lit
        • Login Password Error
    • POST Failure (red pwr LED)
  • Contacting Technical Support
• Configuration Data Sheets
  • Administrative User Setup
  • Attack Detection System
  • DHCP
  • Firewall – Custom IP Filter Configuration
  • Firewall - DMZ
  • Firewall – Level
  • Firewall – Snooze Control
  • Host
  • LAN IP
  • NAT/NAPT
  • Port Forwarding
  • PPP Login
  • RIP
  • Static Route
  • System Log
  • Time Client
  • UPnP
• Technical Specifications
• Firewall Security Levels