Document Outline

• Fibre Channel to SCSI Router PSFR-CP41
  • Introducing the PSFR-CP41
    • Features
    • Specifications
    • PSFR-CP41 Benefits
      • Point-to-Point
      • Single Initiator
      • Multi-Initiator
    • How the PSFR-CP41 Works
    • Operating as Both a SCSI and Fibre Channel Device
      • The SCSI Side
      • The Fibre Channel Side
      • Mapping Devices
    • Processing SCSI Information
    • Processing Fibre Channel Information
  • Installing the PSFR-CP41
    • Location
    • Unpacking the Box
    • Mounting the PSFR-CP41 in a Rack
      • Materials needed
      • Required tools
      • Installation Procedure
      • Interfaces and Connections
      • Fibre Channel Connection
      • SCSI Connection
      • Ethernet Connection
      • Serial Port Connection
      • Autobaud Feature
      • Connecting the Power Cord
    • Management Information Base (MIB)
      • MIB Fibre Channel Interface Information
      • MIB SCSI Interface Information
      • MIB Ethernet and Serial Interfaces Information
  • Understanding the PSFR-CP41 Configuration
    • General Fibre Channel Configuration
      • Soft Addressing
      • Hard Addressing
    • General SCSI Configuration
    • Fibre Channel Host to SCSI Target Configuration
    • Address Mapping
    • Indexed Addressing
    • Auto Addressing
    • SCC Addressing
  • Configuring the PSFR-CP41
    • Operation Indicators
    • Host Device Configuration
    • Device Management
      • Serial
      • Ethernet/Web-Browser
      • SNMP
    • Communicating with the PSFR-CP41
    • Setting Up Serial Port Communications
    • Power Up Menu
    • Perform Configuration
      • Baud Rate Configuration
      • Fibre Channel Configuration
      • SCSI Configuration
      • Ethernet Configuration
      • Fibre Channel-to-SCSI Mapping Configuration
      • SCSI-to-Fibre Channel Mapping Configuration
      • Trace Settings Configuration
      • Save Configuration
      • Restore Last Saved Configuration
      • Reset Configuration to Factory Defaults
    • Display POST Status
    • Display Trace and Assertion History
    • Reboot
    • Download Firmware
    • Configuring the PSFR-CP41’s Ethernet Port
    • SNMP Configuration
      • Toggle Trap
    • SNMP Configuration with Traps Enabled
      • GET and SET Community Names
      • IP Address for Traps
      • Trap Priority
  • Troubleshooting
    • Indicators
    • Basic Verification
      • Verify SCSI Bus Configuration
      • Verify Fibre Channel Connection
      • Verify SCSI Devices in NT
      • Verify Configuration
      • Verify Addressing
      • Verify Devices
      • Verify Host Configuration
      • Verify HBA Device Driver Information
      • RS-232 Port Problems
      • Running Diagnostics
      • Contact Siemens support
  • Appendix A
    • RJ-11 Serial and RJ-45 Ethernet Pin Assignments
  • Appendix B
    • Addressing, Structures and Operation
    • SCC Addressing Option
    • Indexed Addressing Option
    • Auto Assigned Addressing Option
  • Appendix C
    • Reference Standards
  • Glossary
  • Environmental protection
  • Comments, Suggestions, Corrections