Document Outline

• Start-up Guide
  • Before Use
    • To check the accessories
    • To insert batteries into the remote
  • 1: Attaching the stand (Except for 52 inches)
    • 1 Open the carton box and take out the stand and the screws.
      • 2 Place the TV set on the stand. Take care not to interfere with cables.
      • 3 Fix the TV to the stand according to the arrow marks that guide the screw holes using the supplied screws.
    • ~
  • 2: Connecting an aerial/Set Top Box/recorder (e.g. DVD recorder)
  • 3: Preventing the TV from toppling over
    • 1 Install a wood screw (4 mm in diameter, not supplied) in the TV stand.
      • 2 Install a machine screw (M4 ° 20, not supplied) into the screw hole of the TV.
      • 3 Tie the wood screw and the machine screw with a strong cord.
  • 4: Bundling the cables
    • ~
  • 5: Performing the initial Set-up
    • 1
    • 2
    • 3
    • 4
    • ~
      • To Set-up GUIDE Plus+™ System
  • Adjusting the viewing angle of the TV
    • Adjust the angle left and right (swivel)
  • Detaching the Table-Top Stand from the TV
    • ~
  • Safety Information
  • Precautions
  • Remote and TV Controls/Indicators
    • Remote and TV controls
      • z
    • ~
    • ~
    • ~
      • z
    • ~
      • Indicators
      • About the operation guide on the TV screen
• Watching TV
  • Watching TV
    • 1 Press 1 on the TV to turn on the TV.
      • 2 Press DIGITAL to switch to digital mode, or press ANALOG to switch to analogue mode.
      • 3 Press the number buttons or PROG +/- to select a TV channel.
    • To access Text
      • z
    • To change the Screen Format manually
    • ~
      • z
  • Using GUIDE Plus+™ System and the Digital Electronic Programme Guide (EPG)
    • ~
      • Using GUIDE Plus+
    • ~
    • ~
      • z
      • z
        • 1 In digital mode, press GUIDE.
          • 2 Perform the desired operation as shown in the following table or displayed on the screen.
            • 1 Press the blue button.
            • 2 Press F/f to select a category, then press .
            • 1 Press F/f/G/g to select a future programme you want to display, then press .
            • 2 Press F/f to select “Reminder”, then press .
    • ~
      • 1 Press .
      • 2 Press F/f to select “Timer list”, then press .
      • 3 Press F/f to select the programme you want to cancel, then press .
      • 4 Press F/f to select “Cancel Timer”, then press .
      • 5 Press G/g to select “Yes”, then press .
  • Using the Favourite List
    • Analogue Favourites
      • 1 In analogue mode, press .
        • 2 Perform the desired operation as shown in the following table or displayed on the screen.
          • 1 Press F/f to select “Edit Favourites”, then press .
          • 2 Press F/f to select the channel number, then press .
          • 3 Press F/f to select “- -”, then press .
    • Digital Favourites
      • 1 In digital mode, press .
        • 2 Perform the desired operation as shown in the following table or displayed on the screen.
          • 1 Press the blue button.
          • 2 Press the yellow button to select the Favourite list to edit.
          • 3 Press F/f/G/g to select the channel to add or remove, then press .
          • 1 Press the yellow button to select a Favourite list.
          • 2 Press F/f to select a channel, then press .
          • 1 Press the blue button.
          • 2 Press the yellow button to select the Favourite list to edit.
          • 3 Press the blue button.
          • 4 Press G/g to select “Yes”, then press .
• Using Optional Equipment
  • Connecting Optional Equipment
    • Connecting audio-video equipment (quality order, high to low)
    • ~
      • Connecting audio/portable equipment
      • Connecting other equipment
        • z
    • ~
    • Viewing Pictures from Connected Equipment
      • 1 Press .
        • 2 Press F/f to select the desired input source, then press .
      • To view two pictures simultaneously - PAP (Picture and Picture)
      • ~
        • 1 Press OPTIONS.
          • 2 Press F/f to select “PIP/ PAP”, then press .
          • 3 Press F/f to select “PAP”, then press .
          • 4 Press the number buttons or PROG +/- to select the TV channel.
        • To view two pictures simultaneously - PIP (Picture in Picture)
          • 1 Press OPTIONS.
            • 2 Press F/f to select “PIP/ PAP”, then press .
            • 3 Press F/f to select “PIP”, then press .
            • 4 Press the number buttons or PROG +/- to select a TV channel.
          • z
    • Playing back Photo/Music/ Video via USB
      • 1 Connect a supported USB device to the TV.
        • 2 Press HOME.
        • 3 Press G/g to select “Photo”, “Music”, or “Video”.
        • 4 Press F/f to select a USB device, then press .
        • 5 Press F/f to select a file or folder, then press .
      • Photo Playback Auto Start
      • ~
        • The data on the USB device may be damaged.
        • To display a photograph - Picture Frame
          • 1 Select a photograph.
            • 2 Press OPTIONS while the selected photograph is displayed, then press F/f to select “Picture Frame Image” and press .
            • 3 Press RETURN repeatedly to return to the Home Menu.
            • 4 Press G/g to select “Photo”, then select “Picture Frame” and press .
      • ~
        • To display a photograph with the location on the map
          • 1 Select a photograph (page 25).
            • 2 Press the green/red buttons to zoom in/out on the map.
      • ~
        • z
          • 1 Connect the GPS unit to the USB port.
            • 2 Press HOME.
            • 3 Press G/g to select “Photo”.
            • 4 Press F/f to select the GPS unit, then press .
            • 5 Select the following items using F/f, then set them using G/g.
        • - Time Zone
        • - DST
          • 6 Select “OK”, then press .
          • 7 Disconnect the GPS unit and connect the device on which the photograph is stored.
          • 8 Select a photograph (page 25).
          • 9 Press the green/red buttons to zoom in/out on the map.
    • Using BRAVIA Sync with Control for HDMI
      • Control for HDMI
      • To connect the equipment that is compatible with Control for HDMI
      • To make the Control for HDMI settings
• Using Home Network Features
  • ~
  • Connecting to the Network
  • Enjoying AppliCast
    • To Use Widgets
      • 1 Press HOME.
        • 2 Press G/g to select "Network".
        • 3 Press F/f to select the desired Widget to be displayed or simply select "AppliCast" icon to display your preferred list of Widgets.
        • 4 Follow the instruction on the Widget.
    • To Add or remove Widgets in AppliCast
      • 5 While you are displaying the Widget, press OPTIONS.
      • 6 Select "Add to AppliCast" or "Remove from AppliCast". Up to 30 Widgets can be registered in "AppliCast".
      • 7 Follow STEP1-2 above.
      • 8 Press F/f to select the desired Widget, then press OPTIONS.
      • 9 Follow STEP6.
      • z
    • ~
  • Enjoying Photo/Music/ Video Files via the Network
    • 1 Press HOME.
      • 2 Press G/g to select “Photo”, “Music”, or “Video”.
      • 3 Press F/f to select a server, then press .
      • 4 Press F/f to select a file or folder, then press .
    • z
    • ~
      • To enjoy photographs, music and videos on the TV screen by operating devices - Renderer
        • 1 Set “Renderer Function”, “Renderer Access Control” and “Renderer Set-up” in “Network Settings” if necessary (page 44).
          • 2 Play the file selected using the controller on the TV.
    • ~
  • Checking the Network Connection
    • 1 Press HOME.
      • 2 Press G to select “Settings”.
      • 3 Press F/f to select “Network Settings”, then press .
      • 4 Select “Network”, then press .
      • 5 Select “IP Address Settings”, then press .
      • 6 Select an item, and press .
      • 7 Press .
      • 8 Press g to select “Test”, then press .
      • 9 Press G/g to select “Yes”, then press .
    • z
    • If “Connection successful.” does not appear, see “Troubleshooting” (page 52).
  • Adjusting the Server Display Settings
    • 1 Set the server to allow connections from the TV.
      • 2 Press HOME.
      • 3 Press G/g to select “Settings”.
      • 4 Press F/f to select “Network Settings”, then press .
      • 5 Select “Server Display Settings”, then press .
      • 6 Select the server you want to display on the Home Menu, then press .
      • 7 Select “Yes”, then press .
    • If you cannot connect to your home network
      • 1 Press HOME.
        • 2 Press G/g to select “Settings”.
        • 3 Press F/f to select “Network Settings”, then press .
        • 4 Select “Server Diagnostics”, then press .
        • 5 Select “Yes”, then press .
        • 6 Select the server you want to confirm, then press .
• Using Menu Functions
  • Navigating through TV Home Menu on XMB™
    • The XMB™ (XrossMediaBar) is a menu of BRAVIA features and input sources displayed on the TV screen. The XMB™ is an easy way to select programming and adjust settings on your BRAVIA TV.
      • 1 Press HOME to display the XMB™.
        • 2 Press G/g to select the category.
        • 3 Press F/f to select the item, then press .
        • 4 Follow the instructions on the screen.
        • 5 Press HOME to exit.
      • ~
  • TV Settings Menu
    • System Update
    • Instruction Manual
    • ~
      • BRAVIA Tips
      • Clock/Timers
        • z
      • Eco
    • ~
      • Picture
    • ~
      • z
    • ~
    • ~
    • ~
      • Sound
    • ~
      • Screen (for inputs other than a PC)
    • ~
      • Screen (for PC input)
        • z
      • Video Settings
      • Audio Settings
      • Set-up
    • ~
      • 1 Press F/f to select the desired input source, then press .
      • 2 Press g to assign an icon and name.
    • ~
    • ~
      • Analogue Set-up
    • ~
      • 1 Press F/f to select the channel you want to move to a new position, then press .
      • 2 Press F/f to select the new position for the channel, then press .
      • 1 Press F/f to select the channel you want to name, then press .
      • 2 Press F/f to select the desired letter or number (“_” for a blank space), then press g.
      • 3 Repeat step 2 until you finish entering the name.
      • 4 Press to exit the labeling procedure.
      • 1 Press F/f to select “Programme”, then press .
      • 2 Press F/f to select the programme number you want to manually tune (if tuning a VCR, select channel 00), then press .
      • 3 Press F/f to select “System”, then press .
      • 4 Press F/f to select one of the following TV broadcast systems, then press .
      • 5 Press F/f to select “Channel”, then press .
      • 6 Press F/f to select “S” (for cable channels) or “C” (for terrestrial channels), then press g.
      • 7 Tune the channels as follows:
      • 8 Press to jump to “Confirm”, then press .
    • ~
      • Digital Set-up
    • ~
      • 1 Press F/f to select the channel you want to remove or move to a new position.
      • 2 Remove or change the order of the digital channels as follows:
      • 3 Press RETURN.
      • 1 Press the number buttons to enter the channel number you want to tune, or press F/f.
      • 2 When the available channels are found, press F/f to select the channel you want to store, then press .
      • 3 Press F/f to select the channel number where you want to store the new channel, then press .
      • z
      • Network Settings
• Additional Information
  • Installing the Accessories (Wall-Mount Bracket)
    • To Customers:
    • To Sony Dealers and Contractors:
    • ~
      • TV installation dimensions table
        • Figures in the above table may differ slightly depending on the installation.
        • The wall that the TV will be installed on should be capable of supporting a weight of at least four times that of the TV. Refer to “Specifications” (page 48) for its weight.
      • Screw and Hook locations diagram/table
  • Specifications
    • * 1080p timing when applied to the HDMI input will be treated as a video timing and not a PC timing. This affects the “Video Settings” menu and “Screen” menu settings. To view PC contents, set “Screen Format” to “Wide” and “Display Area” to “Full Pixel”.
    • ~
  • Troubleshooting
    • 1 Count how many times the 1 (standby) indicator flashes between each two second break.
      • 2 Press 1 on the TV to turn it off, disconnect the mains lead, and inform your dealer or Sony service centre of how the indicator flashes (number of flashes).
    • 1 Check the items in the tables below.
      • 2 If the problem persists, have your TV serviced by qualified service personnel.
  • Index