Document Outline

• 3-866-217-11(1)
• To prevent fire or shock hazard, do not expose the unit to rain or moisture.
• NOTICE FOR THE CUSTOMERS IN THE U.S.A.
• CAUTION
• INFORMATION
• CAUTION
• Note on CATV system installer:
• NOTICE FOR THE CUSTOMERS IN CANADA
• CAUTION:
• Step 1: Hooking up the system
  • I Connect the speakers.
  • Note
  • Jack type ®
  • Jack type ®
  • Note
• step 2: Setting the time
  • 2 Press or the hour.
  • repeatedly to set
  • 4 Press or repeatedly to set the minute.
  • 5 Press ENTER/NEXT.
  • To change the preset time
• Step3: Presetting radio stations
  • 1 Press TUNER/BAND repeatedly until the band you want appears in the display.
  • 3 Press TUNER MEMORY.
  • 4 Press ENTER/NEXT.
  • 5 Repeat steps 1 to 4 to store other stations.
  • To tune in a station with a weak signal
  • To set another station to the exist preset number
  • To erase a preset number
    • To change the AM tuning interval (for models with the AM TUNING STEP switch on the rear panel)
    • Tip
• Connecting optional AV components
  • Connecting an MD deck for digital recording
  • Connecting an MD deck for analog recording
• Connecting outdoor antennas
  • FM antenna
    • Jack type ®
  • AM antenna
    • Jack type ®
    • Jack type (D
• Playing a CD
  • 1/(1)
  • (power)
  • ■CD^
    • 1 Press A OPEN/CLOSE and place up to two CDs on the disc tray.
• Recording a CD
  • To stop recording
    • Tips
    • Note
• Listening to the radio
  • To listen to non-preset radio stations
    • Manual tuning
    • Tips
• Recording from the radio
  • 1 Press TUNER/BAND to select the band you want.
  • 2 Press or repeatedly to
  • tune in the desired preset station. Press for lower preset numbers.
  • To stop recording
    • Tips
• Playing a tape
  • -II
  • Tips
  • Searching for the start of the current or the next track (AMS*)
  • To go forward
  • To go back
  • Note
• Recording from a tape
  • To stop recording
• Using the CD display
  • Press DISPLAY/DEMO during playback.
  • Tip
• Playing the CD tracks repeatedly
  • Press REPEAT during playback until "REPEAT" appears in the display.
  • To cancel Repeat Play
• Playing the CD tracks in random order
  • To cancel Shuffle Play
  • To select a desired CD
    • Tips
• Programming the CD tracks
  • 6 To program additional tracks, repeat steps 3 to 5.
  • 7 Press CD ►'ll (or CD on the remote).
  • To cancel Program Play
    • Tips
• Recording on a tape manually
• Recording CDs by specifying the track order
  • To stop recording
  • To cancel Program Edit
    • Press EDIT once so that "EDIT" flashes.
    • Place a CD on the disc tray.
    • Note
      • 2 Press FUNCTION repeatedly until "CD" appears in the display.
• Adjusting the sound
  • To reinforce bass (DBFB)
  • To listen through the headphones
• Selecting the audio emphasis
  • ^ Press FILE SELECT repeatedly until the effect (ROCK, POP or DANCE) you desire appears in the display.
  • To cancel the effect
  • To change the spectrum analyzer display
• Falling asleep to music
  • -► Press SLEEP.
  • When you choose "AUTO"
  • To check the remaining time
  • To change the time to turn off
  • To cancel the Sleep Timer function
• Waking up to music
  • 7 Press or repeatedly until the music source you want appears. The indications change as follows:
  • 8 Press ENTER/NEXT.
  • 9 Turn off the system.
  • To check the setting
  • To cancel the timer operation
    • Tip
    • Notes
• Timer-recording radio programs
• 4,5
  • 1 Time in the preset radio station (see "Listening to the radio" on page 13).
  • 2 Press CLOCK/TIMER SET.
  • 3 Press or appears.
  • To cancel the timer operation
    • Notes
• Precautions
  • On operating voltage
  • On safety
  • On placement
  • On operation
  • Notes on CDs
  • Cleaning the cabinet
  • To save a tape permanently
  • Before placing a cassette in the tape deck
  • When using a tape longer than 90 minutes
  • Cleaning the tape heads
  • Demagnetizing the tape heads
• Troubleshooting
  • There is severe hum or noise.
  • The timer does not function.
  • The remote does not function.
  • There is acoustic feedback.
  • Sound comes from one channel or unbalanced left and right volume.
  • The CD tray does not close.
  • If Other troubles not described above occur, reset the system as follows:
• Specifications
  • AUDIO POWER SPECIFICATIONS:
  • Amplifier section
• Index
  • H, I, J, K. L, M
  • T, U, V, W, X, Y, Z