Document Outline

• GB
  • NOTICE FOR CUSTOMERS IN THE UNITED KINGDOM
    • How to replace the fuse
  • Introduction
  • Table of Contents
  • Safety Information
    • For Safety
    • Installation and moving
    • Power Sources
    • Use
    • Additional Safety Information
  • Precautions
  • Checking the Accessories Supplied
  • Overview of the Display Unit
  • Overview of the Media Receiver Unit Buttons and Indicators
  • Overview of the Remote Control Buttons
    • a To Temporarily Switch Off TV:
    • b VCR or DVD on/ off:
    • c Selecting input source:
    • d Displaying the Memory Stick Home (“Memory Stick” picture viewer):
    • e Selecting channels:
    • f a) If the Media Selector is switched to TV:
    • g a) If the Media Selector is switched to VCR or DVD:
    • h Switching off the picture:
    • i Displaying the clock:
    • j This button works in Teletext mode and is also used for programming the remote control to opera...
    • k Selecting screen format:
    • l Selecting channels:
    • m Displaying the menu system:
    • n Adjusting the TV volume:
    • o Selecting Sound effect:
    • p Selecting Picture mode:
    • q Joystick
    • r NexTView:
    • s Selecting Teletext:
    • t Media Selector:
    • u Displaying On Screen information:
    • v Selecting TV mode:
    • w Muting the Sound:
  • Inserting Batteries into the Remote Control
  • Connecting the Display Unit to the Media Receiver Unit
    • 1 Connect the supplied display interface cable and the supplied mains lead for the display unit t...
    • 2 Install the display unit using the specified wall-mount bracket or stand.
    • 3 Connect the supplied display interface cable to the media receiver unit.
  • Storing the cables in the display stand
    • 1 Pull the top of the cable cover of the display stand towards you to unlock it.
    • 2 Detach the cable cover and remove.
    • 3 Store the cables in the display stand.
  • Connecting the Aerial and VCR
  • Switching On the TV and Tuning the TV Automatically
    • 1 Connect the display unit and media receiver unit to the mains (100 - 240V AC; 50/60Hz for the d...
    • 2 The first time that the TV set is connected, it is usually turned on. If the TV is off, press t...
    • 3 Press //or on the remote control to select the language, then press OK to confirm your selection.
    • 4 The Country menu appears automatically on the TV screen.
    • 5 The Clock Set menu appears on the TV screen.
      • a) Press orto set the hour, then press.
      • b) Press orto set the minutes, then press.
      • c) Press orto set the day of a week, then press OK at the time signal. The clock starts.
    • 6 The Auto Tuning menu appears on the screen.
    • 7 The TV automatically starts searching and storing all available broadcast channels for you.
    • 8 The Programme sorting menu appears automatically on the TV screen.
      • A) If you wish to keep the broadcast channels in the tuned order, go to step 9.
      • B) If you wish to store the channels in a different order:
        • a) Press or to select the programme number with the channel (TV Broadcast) you wish to rearrange,...
        • b) Press or to select the new programme number position for your selected channel (TV Broadcast),...
        • c) Repeat steps B) a and B) b if you wish to change the order of the other channels.
    • 9 Press MENU to turn off the menu.
  • Introducing and Using the Menu System
    • 1 Press MENU to switch the first level menu on.
    • 2 Do the following to operate the menu.
    • 3 Press MENU to turn off the menu.
  • Picture Adjustment
  • Sound Adjustment
  • Screen Control
    • 1 After selecting the option, press .
    • 2 Press or to select On (if you wish the TV set to automatically switch the screen format accordi...
    • 1 After selecting the option, press.
    • 2 Press or to select the desired screen format.
    • 1 After selecting the option, press .
    • 2 Press or to select the option and press . Then Press // or to adjust the size and position of t...
    • 1 After selecting the option, press .
    • 2 Press or to select the following option.
  • Features
    • 1 After selecting the option, press .
    • 2 Press or to select Reduce.
    • 1 After selecting the option, press .
    • 2 Press or to select the desired output.
    • 1 After selecting the option, press .
    • 2 Press or to select Reverse. Sound from the TV’s speakers is phase-reversed.
    • 1 After selecting the option, press .
    • 2 Press or to select Variable (if you wish to use the TV’s remote control) or Fix (if you wish to...
    • 1 After selecting the option, press .
    • 2 Press or to select the desired output signal: Auto, TV, AV1, AV2, AV3 (only for AV4 Output), AV...
    • 1 After selecting the option, press .
    • 2 Press or to select AV3 or AV4.
    • 1 After selecting the option, press .
    • 2 Press or to select Auto or Manual.
    • 1 After selecting the option, press .
    • 2 Press or to select White or Black.
    • 1 After selecting the option, press .
    • 2 Press or to select Yes.
  • Set Up
    • 1 After selecting the option, press .
    • 2 Follow steps 3 and 4 of the section “Switching On the TV and Tuning the TV Automatically” on pa...
    • 1 After selecting the option, press .
    • 2 Follow steps 6 and 7 of the section “Switching On the TV and Tuning the TV Automatically” on pa...
    • 1 After selecting the option, press .
    • 2 Follow step 8 B) of the section “Switching On the TV and Tuning the TV Automatically” on page23.
    • 1 After selecting the option, press .
    • 2 Press or to select the programme number with the channel you wish to name, then press OK.
    • 3 Press /// to select the letter, then press OK.
    • 4 When you have finished, press // or to select the word “End” on the screen and press OK to turn...
    • 1 After selecting the option, press .
    • 2 Press or to select the input source you wish to name. Then press .
    • 3 A label automatically appears in the label column:
    • A) Preset Channels, one by one, in the programme order of your choice.
    • 1 After selecting the “Manual Programme Preset” option, press .
    • 2 Highlight the Programme option and press .
    • 3 Press or to select a programme number on which you want to preset the channel. Then press OK.
    • 4 After selecting the System option, press .
    • 5 Press or to select the TV Broadcast system (B/G for western European countries, D/K for eastern...
    • 6 After selecting the Channel option, press .
    • 7 Press or to select the type of channel to be tuned (S for cable channels or C for terrestrial ...
    • 8 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store.
    • B) Label a channel using up to five characters.
    • 1 Highlighting the Programme option, press PROG +/– to select the programme number with the chann...
    • 2 When the programme you want to name appears on the screen, select the Label option and press .
    • 3 Press //or to select the letter, then press OK.
    • 4 When you have finished, press // or to select the word “End” on the screen and press OK to turn...
    • C) Normally the automatic fine tuning (AFT) will give the best possible picture, however you can ...
    • 1 Whilst watching the channel (TV Broadcast) you wish to fine-tune, select the AFT option and pre...
    • 2 Press orto adjust the fine tuning between -15 and +15 and press OK.
    • 3 Highlight the Confirm option and press OK. Then press to select OK and finally press OK to store.
    • D) Skip any unwanted programme numbers when they are selected with the PROG +/–.
    • 1 Highlight the Programme option, press PROG +/– to select the programme number you want to skip.
    • 2 When the programme you want to skip appears on the screen, select the Skip option and press .
    • 3 Press or to select Yes and press OK.
    • 4 Highlight the Confirm option and press OK. Then pressto select OK and finally press OK to store.
    • E) View and record scrambled channels when using a decoder connected to the Scart connectors 3/ o...
    • 1 After selecting the Decoder option, press .
    • 2 Press or to select On and press OK.
    • 3 Highlight the Confirm option and press OK. Then pressto select OK and finally press OK to store.
  • Timer
    • 1 After selecting the option, press .
    • 2 Press or to set the time period delay (max. of 2 hours).
    • 1 After selecting the option, press .
    • 2 Press or to set the hour, then press .
    • 3 Press or to set the minute, then press .
    • 4 Press or to set the day of a week.
    • 5 Press OK at the time signal. The clock starts.
    • 1 After selecting the option, press .
    • 2 Press or to select On, then press OK.
    • 1 After selecting the option, press .
    • 2 Highlight Timer and press or to select On, then press .
    • 3 Press or to select On Time, then press .
    • 4 Set the time for the TV to turn on itself automatically. Press or to set the hour, then press ....
    • 5 Press or to select Holding Time, then press .
    • 6 Press or to select the desired Holding Time. Select the holding time (max. of 5 hours) for the ...
    • 7 Press or to select Weekly Setting, then press .
    • 8 Press or to select the day of the week you wish to set for On/ Off Timer, then press .
    • 9 Press or to select On, then press .
    • 10 Repeat steps 8 and 9 to set any other days of a week.
    • 11 Press or to select Programme, then press .
    • 12 Press or to select the channels (TV Broadcast) that you want to watch at the time of turning o...
    • 1 After selecting the option, press .
    • 2 Press or to select On.
  • Unit Status
  • About “Memory Stick”
    • Supported image types
    • Unsupported image types
    • On handling the “Memory Stick”
  • Inserting and Removing a “Memory Stick”
    • Inserting a “Memory Stick”
    • Removing a “Memory Stick”
      • 1 Check that the “Memory Stick” access lamp is off, then push the “Memory Stick” gently into the ...
      • 2 Pull the “Memory Stick” completely out of the “Memory Stick” slot.
  • Using the “Memory Stick” (Memory Stick Home)
    • Displaying the Memory Stick Home
      • 1 Insert a “Memory Stick” that contains the images you want to view.
      • 2 Press “Memory Stick.”.
    • Selecting the index menu of the Memory Stick Home
    • Selecting a folder that you want to view on the “Memory Stick”
      • 1 Insert a “Memory Stick” that contains the images you want to view.
      • 2 Press “Memory Stick.”.
      • 3 Press or to highlight Select Folder, then press OK.
      • 4 Press to select the list of folders, and press or to select one that you want to view. Then pre...
    • Using the Memory Stick Home
      • 1 Insert a “Memory Stick” that contains the images you want to view.
      • 2 Press “Memory Stick.”
      • 3 Press or to highlight Select Folder, then press OK.
      • 4 Press to select the list of contents, and press or to select a folder that you want to view. Th...
      • 5 Press , then press // or to select an image that you want to display on the full screen or play...
    • Displaying a still image on the full screen
    • Playing back the moving image (Movie Player)
    • Using the “Memory Stick” Slide Show
      • 1 Insert a “Memory Stick” that contains the images you want to view.
      • 2 Press “Memory Stick.”
      • 3 Press or to highlight Select Folder, then press OK.
      • 4 Press to select the list of contents, and press or to select a folder that you want to view. Th...
      • 5 Press or to highlight Slide Show, then press OK.
      • 6 Press or to select Start, and press OK.
    • To Start the Slide Show
    • To stop the Slide Show
    • Caution displays while you are using the “Memory Stick”
    • Caution messages while using the “Memory Stick”
  • Teletext
  • NexTView*
    • Displaying NexTView
      • 1 Select a broadcast channel providing a NexTView service. In this case the indication “NexTView”...
      • 2 To see NexTView service, you have two different NexTView interface types, depending on the % of...
      • 3 To navigate through NexTView:
      • 4 To switch the NexTView off, press on the remote control.
        • A Icons for different themes
        • B Date
        • C Programme list
        • D Record
        • E Remind
  • Connecting Optional Equipment
    • Connecting to the front of the Media Receiver Unit
    • Connecting to the Rear of Media Receiver Unit
    • Connecting a VCR:
    • Connecting a VCR or a DVD recorder that supports SmartLink:
    • If you have connected a decoder to the Scart connector 3/, or through a VCR connected to this Scart:
    • Connecting to external Audio Equipment:
  • Using Optional Equipment
    • 1 Connect your equipment to the designated TV socket, as indicated on pages 61, 62 and 63.
    • 2 Switch on the connected equipment.
    • 3 To watch the picture of the connected equipment, press repeatedly until the correct input symbo...
    • 4 Press the button on the remote control to return to the normal TV picture.
  • Remote Control Configuration for VCR/DVD
    • 1 Press the Media Selector button on the remote control repeatedly until the required VCR or DVD ...
    • 2 Before the green light goes out, press and hold the yellow button for approximately 6 seconds u...
    • 3 Whilst the green light is flashing, enter all three digits of the code for your brand (see next...
    • 4 Turn on your VCR or DVD and check that the main functions work.
  • Specifications
    • Preset mode timing table for PC
  • Troubleshooting
    • Personal Computer
    • “Memory Stick”
  • Television Channel Number Guide for United Kingdom
• DE
  • Einführung
  • Inhaltsverzeichnis
  • Sicherheitsmaßnahmen
  • Zusätzliche Sicherheitsmaßnahmen
  • Kontrolle der mitgelieferten Zubehörteile
  • Allgemeine Beschreibung des Fernsehers mit Bildschirm
  • Allgemeine Beschreibung der Tasten und Anzeigen der Empfangseinheit
  • Allgemeine Beschreibung der Tasten auf der Fernbedienung
  • Einlegen der Batterien in die Fernbedienung
  • Anschluss des Fernsehers mit Bildschirm an die Empfangseinheit
  • Verstauen der Kabel im Ständer des Fernsehers
  • Anschluss der Antenne und des Videorecorders
  • Einschalten und automatische Feinabstimmung des Fernsehers
  • Einführung in das Menü- System auf dem Bildschirm und seine Anwendung
  • Bild- Einstellungen
  • Ton- Einstellungen
  • Bildschirm Einstellen
  • Funktionen
  • Grundeinstellungen
  • Timer
  • Gerätestatus
  • Information über das „Memory Stick“
  • Anwendung des „Memory Stick“ „MS Home“
  • Anwendung des „Memory Stick“ (MS Home)
  • Videotext
  • NexTView*
  • Anschluss von frei wählbaren Zusatzgeräten
  • Anwendung der frei wählbaren Zusatzgeräte
  • Grundeinstellung der Fernbedienung für einen Videorecorder oder ein DVD
  • Technische Daten
  • Störungsbehebung
• FR
  • Introduction
  • Table des matières
  • Consignes de sécurité
  • Précautions
  • Vérification des accessoires fournis
  • Présentation générale du panneau du téléviseur à écran
  • Description générale de l’unité de réception
  • Description générale des touches de la télécommande
  • Insertion des piles dans la télécommande
  • Branchement de l’ écran à l’unité de réception
  • Rangement des câbles dans le support d’écran
  • Branchement de l’antenne et du magnétoscope
  • Mise sous tension et mémorisation automatique des chaînes du téléviseur
  • Introduction au Système des menus et son utilisation
  • Contrôle de l’image
  • Contrôle du son
  • Commande écran
  • Fonctions
  • Réglage
  • Temporisation
  • Statut téléviseur (Coordonnées de l’appareil)
  • Le “Memory Stick”
  • Insérer et retirer un “Memory Stick”
  • Utilisation du “Memory Stick” (Origine Memory Stick)
  • Télétexte
  • NexTView*
  • Connexion des équipements en option
  • Utilisation des équipements en option
  • Configuration de la télécommande pour un magnétoscope ou un DVD
  • Spécifications
  • Dépannage
  • Les principaux émetteurs français
  • Les principaux émetteurs français
  • Les principaux émetteurs français
• NL
  • Inleiding
  • Inhoudsopgave
  • Veiligheidsrichtlijnen
  • Voorzorgsmaatregelen
  • Meegeleverd toebehoren controleren
  • Overzicht van beeldschermeenheid:
  • Overzicht van de toetsen en indicaties van de ontvangsteenheid
  • Overzicht van de toetsen op afstandsbediening
  • De batterijen in de afstandsbediening plaatsen
  • Het beeldscherm op de ontvangsteenheid aansluiten
  • De kabels in de stander opbergen
  • De antenne en de videorecorder aansluiten
  • De TV aanzetten en automatisch afstemmen
  • Inleiding en bediening van het menusysteem
  • Beeldinstellingen
  • Geluidsinstellingen
  • Beeldregeling
  • Kenmerken
  • Instellingen
  • Timer
  • Toestelstatus
  • Met betrekking tot de “Memory Stick”
  • De “Memory Stick” insteken en verwijderen
  • De “Memory Stick” gebruiken (Memory Stick Home Page)
  • Teletekst
  • NexTView*
  • Extra apparatuur aansluiten
  • De bediening van de extra apparatuur
  • De afstandsbediening voor een videorecorder of DVD configureren
  • Technische gegevens
  • Problemen oplossen