Southern States LSH Instruction Manuals and User Guides
We have 1 Instruction Manual and User Guide for LSH Southern States
Manuals
| Recognized languages: | English |
|---|---|
| Pages: | 9 |
| Size: | 80 KB |
Show table of contents
Read manual
Document Outline
- 1.0 SCOPE
- 2.0 STANDARDS
- 3.0 DESIGN REQUIREMENTS
- 3.01 General
- 3.02 Service Conditions
- 3.03 Ratings
- 3.04 Interrupter
- 3.05 Insulators
- 3.06 Terminal Pads
- 3.07 Operating Mechanisms
- 3.07.01 Shunt Trip Mechanisms
- 3.07.02 Motor Operating Mechanism
- 1. Electric motor
- 2. Open-Close push buttons
- 3. Reversing contactor
- 4. Anti-pump relay
- 5. Time delay relay
- 6. Local-remote selector switch
- 7. 12 stage adjustable auxiliary switch (eight stages [contacts] of
- which shall be available for purchaser use)
- 8. Thermostatically controlled 100 watt cabinet heater
- 9. Fused pullouts for protection of motor circuit and heater circuit
- 10. Decoupler for vertical pipe
- 11. Manual crank handle (Insertion of handle shall automatically
- disconnect the motor circuit)
- 12. Position indicating lights (green=open, red=closed)
- 13. Operations counter
- 14. 120 VAC cabinet light with toggle switch
- 15. Front and right side hinged, removable doors
- 3.07.03 Hinge Assemblies
- 3.07.04 Switch Blades
- 3.07.05 Stationary Jaw Contacts
- 3.08 Ground Pads
- 4.0 MANUFACTURING REQUIREMENTS
- 5.0 DESIGN TESTS
- 6.0 PRODUCTION TESTS
- 7.0 SPARE PARTS
- 8.0 DOCUMENTATION REQUIREMENTS
- 9.0 SHIPPING and DELIVERY
- 10.0 WARRANTY
- 11.0 SPECIFIC QUOTE REQUIREMENTS
- 1. Model type (blade or non-blade)
- 3. Continuous current rating .
- 5. Motor / Control voltage (48 VDC or 125 VDC)
- 6. Heater voltage (120 VAC or 240 VAC)
- 7. Mounting pedestal height
- 8. Phase spacing
- 9. If manufacturer is to supply anchor bolts
- 10. Additional requirements, if applicable (see section 3.02.05)
- 12.0 ACCEPTABLE CIRCUIT SWITCHER