Document Outline

• Table of Contents
• 1. WELCOME TO THE WORLD OF SUUNTO DIVING INSTRUMENTS
• 2. WARNINGS, CAUTIONS, AND NOTES
• 3. SUUNTO Cobra2 AT A GLANCE
  • 3.1. Navigating in the menus
  • 3.2. Button symbols and functions
• 4. GETTING STARTED WITH YOUR SUUNTO Cobra2
  • 4.1. TIME mode settings
    • 4.1.1. Setting the alarm
    • 4.1.2. Setting the time
    • 4.1.3. Setting the date
    • 4.1.4. Setting the units
    • 4.1.5. Setting the backlight
    • 4.1.6. Setting the tones
  • 4.2. AC water contacts
  • 4.3. Learning how to use your compass
    • 4.3.1. Compass display
      • Tilt sensor
    • 4.3.2. Locking a bearing
    • 4.3.3. Compass settings
      • Declination
      • Calibration
• 5. BEFORE DIVING
  • 5.1. The Suunto RGBM/Deep Stop Algorithm
  • 5.2. Emergency ascents
  • 5.3. Dive computer limitations
  • 5.4. Nitrox
  • 5.5. Audible and visual alarms
  • 5.6. Error conditions
  • 5.7. Air integration
    • 5.7.1. Connecting Suunto Cobra2 to a regulator
  • 5.8. DIVE mode settings
    • 5.8.1. Setting the depth alarm
    • 5.8.2. Setting the dive-time alarm
    • 5.8.3. Setting the nitrox values
    • 5.8.4. Setting the personal/altitude adjustments
    • 5.8.5. Setting the sample rate
    • 5.8.6. Setting the Safety Stops/Deep Stops
    • 5.8.7. Setting the RGBM values
  • 5.9. Activation and pre-checks
    • 5.9.1. Accessing DIVE mode
    • 5.9.2. DIVE mode activation
    • 5.9.3. Battery power indication
    • 5.9.4. Diving at altitude
    • 5.9.5. Personal adjustments
  • 5.10. Safety Stops
    • 5.10.1. Recommended Safety Stops
    • 5.10.2. Mandatory Safety Stops
  • 5.11. Deep stops
• 6. DIVING
  • 6.1. Diving in AIR mode (DIVEair)
    • 6.1.1. Basic dive data
    • 6.1.2. Bookmark
    • 6.1.3. Tank pressure data
    • 6.1.4. Ascent rate indicator
    • 6.1.5. Safety Stops
    • 6.1.6. Decompression dives
      • Ceiling, ceiling zone, floor and decompression range
      • Display below the floor
      • Display above the floor
      • Display at the ceiling zone
      • Display above the ceiling
  • 6.2. Diving in NITROX mode (DIVEnitrox)
    • 6.2.1. Before diving in NITROX mode
      • Default nitrox settings
    • 6.2.2. Oxygen displays
    • 6.2.3. Oxygen limit fraction (OLF)
    • 6.2.4. Gas change and multiple breathing gas mixes
  • 6.3. Diving in GAUGE mode (DIVEgauge)
• 7. AFTER DIVING
  • 7.1. Surface interval
  • 7.2. Dive numbering
  • 7.3. Repetitive dive planning
  • 7.4. Flying after diving
  • 7.5. PLAN mode
    • 7.5.1. Dive Planning mode (PLANnodec)
      • Dive numbering shown during dive planning
    • 7.5.2. Simulation Mode (PLANsimulator)
      • Dive Simulator
  • 7.6. MEMORY mode
    • 7.6.1. Dive logbook (MEMlogbook)
    • 7.6.2. Dive history (MEMhistory)
  • 7.7. Suunto Dive Manager (SDM)
  • 7.8. www.suuntosports.com and Suunto Diving World at www.suunto.com/diving
• 8. CARE AND MAINTENANCE
  • 8.1. Water contacts and buttons
  • 8.2. Care of your dive computer
  • 8.3. Maintenance
  • 8.4. Water resistance inspection
  • 8.5. Battery replacement
    • 8.5.1. Battery kit
    • 8.5.2. Required tools
    • 8.5.3. Battery replacement procedure
• 9. TECHNICAL DATA
  • 9.1. Technical specifications
  • 9.2. RGBM
    • 9.2.1. Suunto RGBM adaptive decompression
    • 9.2.2. No-decompression limits
    • 9.2.3. Altitude diving
  • 9.3. Oxygen exposure
• 10. INTELLECTUAL PROPERTY
  • 10.1. Copyright
  • 10.2. Trademark
  • 10.3. Patent notice
• 11. DISCLAIMERS
  • 11.1. User’s responsibility
  • 11.2. CE
  • 11.3. Limits of liability and ISO 9001 compliance
  • 11.4. After sales service
• 12. WARRANTY
• 13. DISPOSAL OF THE DEVICE
• GLOSSARY