Document Outline

• 1 About this document
  • 1.1 Function
  • 1.2 Target group
  • 1.3 Symbolism used
• 2 For your safety
  • 2.1 Authorised personnel
  • 2.2 Appropriate use
  • 2.3 Warning about incorrect use
  • 2.4 General safety instructions
  • 2.5 Safety label on the instrument
  • 2.6 CE conformity
  • 2.7 Fulfillment of NAMUR recommendations
  • 2.8 Environmental instructions
• 3 Product description
  • 3.1 Configuration
  • 3.2 Principle of operation
  • 3.3 Operation
  • 3.4 Packaging, transport and storage
  • 3.5 Accessories and replacement parts
• 4 Mounting
  • 4.1 General instructions
  • 4.2 Mounting instructions
• 5 Connecting to power supply
  • 5.1 Preparing the connection
  • 5.2 Connection procedure
  • 5.3 Wiring plan, single chamber housing
  • 5.4 Wiring plan, double chamber housing
  • 5.5 Wiring plan - version IP 66/IP 68, 1 bar
• 6 Set up with the display and adjustment module PLICSCOM
  • 6.1 Short description
  • 6.2 Insert display and adjustment module
  • 6.3 Adjustment system
  • 6.4 Setup steps
  • 6.5 Menu schematic
  • 6.10 Saving the parameter adjustment data
• 7 Set up with PACTware and other adjustment programs
  • 7.1 Connect the PC
  • 7.2 Parameter adjustment with PACTware
  • 7.3 Parameter adjustment with AMS™ and PDM
  • 7.4 Saving the parameter adjustment data
• 8 Maintenance and fault rectification
  • 8.1 Maintenance
  • 8.2 Rectify faults
  • 8.3 Exchanging the electronics module
  • 8.4 Shortening the electrode
  • 8.5 How to proceed in case of repair
• 9 Dismounting
  • 9.1 Dismounting steps
  • 9.2 Disposal
• 10 Supplement
  • 10.1 Technical data
  • 10.2 Dimensions
  • 10.3 Industrial property rights
  • 10.4 Trademark