Husqvarna HUV 4214 - Manual (Page 35)

Periodic Lubrication Schedule
PERIODIC SERVICE SCHEDULE
REGULAR INTERVAL SERVICE
Check for leaks around gaskets, fill plugs, etc.
Adjust valve clearance. See Briggs and
Stratton Vanguard Model 2900000 Service
Manual. Engine
Inspect, clean, and gap spark plug; replace if
necessary. See authorized dealer or trained
technician for service.
Replace air filter element. See Air Intake
System on page 42.
Engine air intake system
Check clamps for tightness; check hose for
cracks.
General vehicle
Check for loose hardware and tighten if
necessary.
Fuel filters Replace. Dispose of used filters properly.
Annual service by trained technician only
(or every 100 hours of operation, whichever
comes first)
Clutch cover vent inlet filter (if equipped) Replace. Dispose of used filters properly.
WARNING
• If any problems are found during scheduled inspection or service, do not operate vehicle until repairs
are made. Failure to make necessary repairs could result in fire, property damage, severe personal
injury, or death.
PERIODIC LUBRICATION SCHEDULE
PERIODIC LUBRICATION SCHEDULE
REGULAR INTERVAL SERVICE
LUBRICATION
POINTS
RECOMMENDED LUBRICANT
First change 5 - 8 hours –
additional change every 100
hours of operation or annually,
whichever comes first
Change engine oil and oil filter 1
1 - 1/2 qt. (1.4L) with filter, 10W-30 API
classification SJ See Oil Viscosity
on page 39.
Change every 50 hours of
operation or semiannually
whichever comes first
Driveshafts and bearing blocks 2 Chassis Lube (EP NLGI Grade 2)
Change every 100-400 hours
of operation or semiannually
whichever comes first
Change front differential lubricant 5 oz. (170 mL) 80W90 Gear Oil
First change 50 hours –
additional change every 100
hours of operation or annually,
whichever comes first
Change rear transaxle lubricant 1 gal. (3.79 L) 10W-30 SF, SG, SH
2009 HUV 4214, HUV 4414, andHUV 4414-XP Owner’s Manual Page 33