HP 2600/2700 - Manual (Page 224)

Photo (dpi) Fine (dpi) Standard (dpi)
Color 200 by 200 200 by 200 200 by 200
Memory card specifications
● Maximum recommended number of files on a memory card: 1,000
● Maximum recommended individual file size: 12 megapixel maximum, 8 MB maximum
● Maximum recommended memory card size: 1 GB (solid state only)
Note Approaching any of the recommended maximums on a memory card might cause the
performance of the HP all-in-one to be slower than expected.
Supported memory card types
● CompactFlash
● SmartMedia
● Memory Stick
● Memory Stick Duo
● Memory Stick Pro
● Secure Digital
● MultiMediaCard (MMC)
● xD-Picture Card
Scan specifications
● Image editor included
● Integrated OCR software automatically converts scanned text to editable text
● Scan speeds vary according to the complexity of the document
● Twain-compliant interface
● Resolution: 2400 by 4800 dpi optical, up to 19,200 dpi enhanced
● Color: 48-bit color, 8-bit grayscale (256 levels of gray)
● Maximum scan size from glass: 8.5 by 11.7 inches (216 by 297 mm)
Physical specifications
● Height: 21.21 cm (8.35 inches) (color graphics display in the down position)
● Width: 46.4 cm (18.3 inches)
● Depth: 37.2 cm (14.7 inches)
49 cm (19.3 inches) (HP Automatic Two-sided Printing Accessory attached)
● Weight: 8.5 kg (18.75 pounds)
10.8 kg (23.75 pounds) (HP Automatic Two-sided Printing Accessory and optional HP 250
Sheet Plain Paper Tray attached)
Power specifications
● Power consumption: 75 W maximum
● Input voltage: AC 100 to 240 V ~ 2 A 50–60 Hz, grounded
● Output voltage: DC 31Vdc===2420 mA
Environmental specifications
● Recommended operating temperature range: 15º to 32º C (59º to 90º F)
● Allowable operating temperature range for the HP all-in-one: 5º to 40º C (41º to 104º F)
● Allowable operating temperature range for the printing system: -15º to 35º C (5º to 104º F)
● Humidity: 15% to 85% RH non-condensing
● Non-operating (Storage) temperature range: –4º to 60º C (–40º to 140º F)
(continued)
User Guide 221
Technical
information