7 steering display, 0 0 1 - w p, Beacon information display – Furuno NAVIONICS GP-1850F User Manual

Page 32: How to read the compass display, Figure 3-13 steering display

Advertising
background image

3-6

Beacon information display

Equipped with a DGPS beacon receiver, your
unit can show DGPS reference station infor-
mation. Press the soft key BEACON INFO to
show the DGPS reference station informa-
tion.

DGPS 3D

RETURN

BEACON

INFO

MODE
FREQ
BAUD
RATE

AUTO SEARCH

288.0kHz

200 BPS

RECEIVED DATA:

BEACON STATION:

OK

OK

SS

SN

75

19

Beacon receiver setting status

Receive data status

Signal strength (SS),
Signal to noise ratio (SN)

DGPS reference station information

Figure 3-12 Beacon information display

SS: SS (Signal Strength) displays a numeric
representation of field strength of the received
signal on the selected frequency. The higher
the number the stronger the received signal.
If noise is present at reception band width,
the figure gets bigger.

SN: SN (Signal-to-Noise) ratio displays the
ratio between the desired signal and un-
wanted noise on the selected frequency. The
higher the SN ratio the better the quality of
the signal.

Note: If your equipment does not have a
DPGS receiver, the message “NO DIFFER-
ENTIAL DATA” appears when the soft key
BEACON INFO is pressed.

3.7

Steering Display

The steering display provides steering infor-
mation such as range, bearing, ETA to desti-
nation, course and speed.

Press the [PLOT] key several times to show
the steering display.

DGPS 3D

EDIT
XT-LMT

X T E

0 0 0 . 0 2 n m

0.1NM

0.1NM

BRG

2 4 5 . 0

°

CSE
TTG

RNG
SPD

n m
k t

ETA

1h 59m

29th 14:50

2 3 4 . 5

°

2 7 . 2
1 3 . 6

260

250

240

230

CROSS

TRACK

0 0 1 - W P

Bearing from
own ship to
waypoint

Course indicator

Compass bearing

Course

Amount of XTE in nautical miles

XTE scale

Time-to-go to waypoint

Own ship

XTE
indication
range

Waypoint name

Range from own ship to waypoint

Speed

Estimated time of arrival

Bearing to waypoint

Indicates the
direction to steer

Figure 3-13 Steering display

How to read the compass display

The solid inverted triangle at the center of
the compass shows own ship’s course (head-
ing). The hollow inverted triangle shows the
bearing to destination waypoint. When own
ship’s course is changed, the hollow inverted
triangle moves with course change.

Advertising
This manual is related to the following products: