Using the pocket pc, Cleaning pocket pc, Disposal and recycling – Fujitsu Siemens Computers LOOX N User Manual

Page 15: Liability

Advertising
background image

Important notes

Using the Pocket PC

Store the Pocket PC in a fully charged state in a dry environment. If you store the Pocket PC for up
to a month, the storage temperature should be between –20 °C and +60 °C. If you store the Pocket
PC for up to three months, the storage temperature should be between –20 °C and +45 °C. The
lower the temperature at which the batteries are stored, the lower is the rate of self-discharge.

i

Avoid leaving your Pocket PC lying in direct sunlight in a car. The temperature could
exceed the permissible 60 °C in such cases!
To protect the battery, battery charging is interrupted at excessively high temperatures
(over 48 °C).

Please note that batteries discharge themselves over time. Therefore, recharge the battery of your
Pocket PC at regular intervals during the storage period.
Protect the slots for expansion cards and the ActiveSync connection of the Pocket PC from soiling.
Soiling can lead to contact problems.

Cleaning Pocket PC

Switch the Pocket PC off.

Pull the PSC11R-050 power adapter out of the electrical outlet.

!

Do not use any cleaning agents that contain abrasives or may corrode plastic.
Please ensure that no liquid enters the Pocket PC.

The device surface can be cleaned with a dry cloth.
If it is very dirty, you can clean the device and the display with a damp cloth.

Disposal and recycling

You will find further information about country-specific recycling and disposal options in the Internet
under www.fujitsu-siemens.com/recycling or on the Microsoft Getting Started CD.

Liability

Fujitsu Siemens Computers GmbH cannot be held responsible for radio or television faults arising
from unauthorised changes made to this device. Fujitsu Siemens Computers is, furthermore, not
responsible for replacing and/or exchanging connector cables and devices which have not been
specified by Fujitsu Siemens Computers GmbH. The user is solely responsible for repairing faults
arising from such unauthorised changes made to a device and for replacing and/or exchanging
devices.

A26391-K165-Z120-1-7619, edition 1

7

Advertising
This manual is related to the following products: