Resetting pocket pc to delivered state – Fujitsu Siemens Computers LOOX N User Manual
Page 28
Operating the Pocket PC
Resetting Pocket PC to delivered state
1
2
3
►
Simultaneously press and hold the Suspend/Resume button (1) and the Calendar application
button (2).
►
Briefly press the stylus tip into the soft reset opening (3). Continue to hold down the
Suspend/Resume button and the Calendar application button for a few seconds.
The reset can take a few minutes. At the end an acoustic signal sounds. Please follow the further
instructions on the display.
i
When you reset your Pocket PC to the delivered state, the battery switches off so that the
RAM content is lost. This means: You loose all data (documents, additionally installed
programs, personal settings) that you haven't saved elsewhere. Back up your data
regularly (memory card, FSC Backup).
If you have set a password with FSC Password and marked it as permanent, the password
remains intact.
20
A26391-K165-Z120-1-7619, edition 1