Fujitsu Siemens Computers LOOX N - Manual (Page 33)

Operating the Pocket PC
Using Pocket PC as USB Host device
With the optional USB Host cable you can use
your Pocket PC as a USB Host device and
connect various USB devices, such as a
MEMORYBIRD, to the Pocket PC.
The USB Host cable is available as an accessory
under the name "Sync Cable USB client/host".
i
You can connect USB devices from Fujitsu Siemens Computers (e.g. MEMORYBIRD or
STORAGEBIRD) immediately.
If you want to connect other USB devices, ask your dealer whether drivers must be
installed.
The current consumption of the USB device may not exceed 100 mA (at +5 V). USB
devices with a current consumption of more than 100 mA must be supplied with power via
their own power supply.
1
2
► Connect the USB host cable (1) to the ActiveSync port on the Pocket PC.
► Connect the USB device (such as a MEMORYBIRD) to the USB port (2) of the USB Host
cable.
The USB device is now connected to your Pocket PC.
►
If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050
power adapter (see section "Connecting PSC11R-050 power adapter").
A26391-K165-Z120-1-7619, edition 1 25