Fujitsu Siemens Computers LOOX N - Manual (Page 42)

Operating the Pocket PC
Using cradle for data synchronisation
i
Before the first data synchronisation between the Pocket PC and the PC/notebook, you
must install the program ActiveSync on your PC/notebook (see section "Initial start-up").
4
3
5
4
2
► Switch your PC or notebook on.
► Place the Pocket PC in the cradle (1).
► Connect the ActiveSync cable (2) to the ActiveSync port of the cradle.
► Connect the ActiveSync cable to a USB port (3) of your PC/notebook.
The Pocket PC is now connected to your PC/notebook. The ActiveSync partnership between your
Pocket PC and your PC/notebook will be established.
►
If the battery charge level of your Pocket PC is low, you should connect the PSC11R-050
power adapter (see section "Connecting PSC11R-050 power adapter").
i
You can leave the connections between the cradle and PSC11R-050 power adapter, and
between the cradle and your PC/notebook connected all the time. This means you only
need to place your Pocket PC in the cradle to charge the battery and for data
synchronisation.
More information on data synchronisation is contained in the section "Synchronising data with
ActiveSync" and in the help file on your Pocket PC.
34 A26391-K165-Z120-1-7619, edition 1