Fujitsu Siemens Computers LOOX N - Manual (Page 46)

Configuring the Pocket PC
Configuring hardware buttons
FSC KeyLock: Preventing switch-on with application buttons
By default, your Pocket LOOX starts up if the Suspend button and an application button are pressed.
In the program FSC KeyLock you can specify that the Pocket PC only starts if the Suspend button is
pressed.
You will find further information in the help file on your Pocket LOOX and in the user manual "Pocket
LOOX Software Suite" on the Microsoft Getting Started CD.
Assigning chosen functions to the hardware buttons
The buttons of your Pocket PC are assigned certain functions such as running programs. However,
you can change these default settings and assign the buttons the functions of your choice.
► Tap
Start.
► Select the Settings entry in the menu.
► Touch the Buttons symbol on the Private tab.
A list of the hardware buttons and the assigned programs or functions appears. The four application
buttons appear in the list twice. This is because you can assign different applications to these
buttons for short and for long keystrokes.
►
Mark the button in the list for which you want to change the assignment.
► Select the program you want to assign to this button from the list below it.
► Touch OK (navigation bar) to confirm your setting.
The button is now assigned the desired program.
If you want to change the function of several buttons, we advise you to make a note of the new
functions.
38 A26391-K165-Z120-1-7619, edition 1