Meridian Audio 501 - Manual (Page 11)

Introduction
7
Video specification (501V only)
V1 – V6 inputs Composite unbalanced RCA phono
75
Ω
, 0.5 – 1.5Vp/p.
S1, S2 inputs S-VHS 4 pin MiniDIN.
Monitor output Unbalanced RCA phono 75
Ω
, 1.5Vp/p
to monitor.
VCR outputs 1, 2 Unbalanced phono 75
Ω
, 1Vp/p to
VCRs, identical signal via splitter.
Main S-OUT S-VHS 4 pin MiniDIN.
VCR1, VCR2 S-OUT S-VHS 4 pin MiniDIN, two function
select outputs for SCART.
Meridian Audio reserves the right to amend product
specifications at any time.
Available accessories
The following accessories are available from your dealer:
❍ MM phono module.
❍ MC phono module.
❍ Meridian System Handset.
❍ Power cord Europe.
❍ Power cord Canada and USA.
The MM and MC phono modules convert the LP audio input (A1)
for use with a moving magnet or moving coil pickup,
respectively.
The Meridian System Handset provides access to all the
facilities provided by the 501/501V Control Unit, including those
available from the front panel controls. In addition, it allows you
to control any other 500 Series units in your system.
If you have problems purchasing these items, you can order
them direct from Meridian Audio Limited, who can also supply a
range of cables suitable for connecting the 501/501V Control
Unit to other equipment.