Furuno FELCOM 81B - Manual (Page 35)

2.3 Telephone
General The telephone can be installed on a tabletop or a bulkhead.
Select a location where the unit can easily be operated.
For installation on a wooden table, use the mounting
base and tapping screws (supplied).
For installation on a steel table, fix the telephone with
nuts and bolts.
For bulkhead mounting, use the bulkhead mounting
base (supplied with telephone accessories).
Mounting location Select a location where temperature and humidity are
moderate and stable. Secure sufficient space around the
unit for ease of operation and maintenance.
Mounting The mounting dimensions are given in the outline drawing
at the end of this manual. Determine the mounting loca-
tion, leaving sufficient space around the unit, and then fix
the mounting base to the mounting location. The mounting
base is different for bulkhead and tabletop mounting,
however the mounting procedure is the same for all.
1. Fix the mounting base to the mounting location with
four tapping screws (4 × 16).
2. On the underside of the telephone, unfasten the screw
shown in the figure at left. (The screw may be discar-
ded.) Attach double-sided tape (supplied) to the handset
supporter. Fasten the handset supporter to the underside
of the telephone with a screw (supplied : 3 × 14).
3. The catch in the receiver cradle functions to hang up the
handset completely. Set the catch in the upward position
as shown below. (To detach the handset from the
hanger, slide the handset upward.)
4. Set the telephone to the four catches in the mounting
base and then slide it toward you until you hear a click.
5. Attach the "SLIDE" label (supplied) to the handset.
6. Attach English language label (supplied) to the tele-
phone.
2.3 Telephone
2-11
Attach
handset
supporter
here.
Mounting Base Stopper
Handset Supporter
Catch
Mounting Base
Secure
mounting
base with
tapping
screws.
Table top: Use installation
materials.
Bulkhead: Use telephone
accessories.
Unfasten
this
screw.
To remove the telephone from mounting
base, press the mounting base stopper,
and slide telephone forward.
Bottom View