Setting language of the osd menu, Carrying out programme search – Fujitsu Siemens Computers P42-1AH User Manual
Page 16
MYRICA P42-1AH / P42-2H / P50-2H
14 - English
A26361-K1064-Z120-1-M119, edition 2
Setting language of the OSD menu
After switching on the device, set the language of the OSD (On Screen Display) menu according to
your needs. English is the set as the default setting. If you want to use a different language, change
this setting with the OSD menu.
►
Switch the plasma TV on with the ON/OFF switch.
►
Press the POWER button.
►
Press the MENU button to open the OSD menu.
► Choose
the
Setup menu item using the
button.
►
Press the MENU button to activate the menu item.
► Choose
the
Advanced menu item using the
button.
►
Press the MENU button to activate the menu item.
► Choose
the
Language menu item using the
button.
►
Press the MENU button to activate the menu item.
►
Select the language to be shown in the OSD menu with the buttons
/
.
►
Press the Menu button. The OSD menu will be changed over to the selected language.
Carrying out programme search
A programme search must be carried out to put the plasma TV into operation. Use the supplied
remote control.
►
Switch the plasma TV on with the ON/OFF switch.
►
Press the POWER button.
First the signal source must be set to the TV mode.
►
Press the SOURCE button.
► Choose
the
TV option using the
button.
►
Press the MENU button to activate the menu item.
Then you automatically start the programme search.
►
Press the MENU button to open the OSD menu.
► Choose
the
TV menu item using the
button.