FOCUS Enhancements FS-2 - Manual (Page 26)

Introduction
FS-2/2E Studio DTE Disk Recorder User Guide
6
1.6 Mounting in a 19 inch Electronics Rack
The FS-2/2E measures 15.89” high x 17.36” wide by 3.47” deep. It is an 2RU chassis
featuring front rack mount ears to be installed into a standard 19” audio/visual
rack. There must be room behind the unit for the attachment of cables.
To mount the FS-2/2E in a standard 19” audio/visual rack, do the following:
1. Determine the desired location.
The FS-2/2E requires 3.47 vertical inches of rack space.
To prevent overheating, the FS-2/2E requires a minimum of 1.75 vertical
inches of space above and below the unit.
2. The FS-2/2E includes a pair of universal mounting ears on the front sides of
the unit that support standard 19” audio/visual racks. Using the provided
hardware, mount the FS-2/2E securely in the rack.
3. Connect the FS-2/2E unit to the wall current using the attached power cord.
Universal Mounting Ears Universal Mounting Ears
Mounting Screws
(2 per Mounting ear)