FOCUS Enhancements FS-2 - Manual (Page 42)

FS-2/2E Functions
FS-2/2E Studio DTE Disk Recorder User Guide
22
2.1.3.4 SDI Serial Digital Video Source Input Key
Press this key to select SDI video ( SMPTE 259M ) as the input
source.
The default audio link is embedded AES/EBU digital audio in the
stream. You can also select either balanced analog audio or
separate AES/EBU audio as the input link in the SETUP > AUDIO
INPUT menu.
The FS-2E provides the option to select either channels 1 and 2 or
3 and 4 of the embedded audio of the SDI stream. Refer to the
SETUP > AUDIO INPUT > SDI > EMBEDDED sub-menu on page 59.
2.1.3.5 DV Video Source Input Key
Press this key to select DV video (25Mb/s) as the input source.
The default audio link is embedded 2-channel digital audio in the
stream. You can also select either balanced analog audio or AES/
EBU audio as the input link in the SETUP > AUDIO INPUT menu.
2.2 LCD Menu Soft Keys
The three keys directly below the FS-2/2E LCD display are soft keys for navigating
and selecting items in the FS-2/2E menu.
These keys are also used for selecting different display modes. They are called soft
because their function changes depending upon what is displayed on the LCD
above the particular key.
Using the Right Soft Key to Scroll
In some cases when navigating the FS-2/2E menus, you can use the right soft key to scroll
down through the menu. To scroll up, just hold down the SHIFT key as well as the right soft
key.