FUJITSU E8020 - Manual (Page 6)

6
L i f e B o o k E S e r i e s B I O S
Serial ATA Port 0 Submenu of the Main Menu
The Serial ATA Port 0 submenu identifies what ATA devices are installed.
Figure 2. Serial ATA Port 0 Master Submenu
Table 2: Fields, Options and Defaults for the Serial ATA Port 0 Submenu of the Main Menu
Menu Field Options Default Description
Type: ■ Auto
■ None
[Auto] Selects the ATA/ATAPI device type. Select Auto to have the type
automatically identified by the BIOS at POST. If None is selected, all
of the following Setup items do not appear.
LBA Format Logical Block Addressing (LBA)
Total Sectors: --- --- The total number of sectors on your hard disk
Maximum
Capacity: --- --- The maximum capacity of your hard disk
PhoenixBIOS Setup Utility
F1 Help
ESC Exit
Select Item
Select Menu
-/Space
Enter
F9 Setup Defaults
F10 Save and Exit
Change Values
Select Sub-Menu
Main
Item Specific Help
Select Serial ATA/IDE
drive installed here.
[Auto]
The BIOS auto-types the
drive on boot time.
[None]
The drive is disabled.
Serial ATA Port 0 [FUJITSU MHT2080BH-SATA]
Type: [Auto] ]
LBA Format
Total Sectors: 156301488
Maximum Capacity: 80026MB
▲